Stiskalni stroj

Sachman SYNCRON 200

Stanje: rabljeno, Leto izdelave: 1997, Krmiljenje Heidenhain 355 X-hod 850 mm Y-hod 550 mm Z-hod 450 mm Vpenjalo orodja SK50 Teža stroja cca 5,5 t +++++ Upoštevajte, da je stroj v razstavljenem in za nakladanje pripravljenem stanju. Zaradi tega demonstracija pod napetostjo ali izdelava videa nista možni. Bjdpfxjd N Smhj Afqsdk Naš oglas vsebuje najbolj reprezentativne fotografije najvišje možne kakovosti. Pošiljanje dodatnih slik žal ni mogoče. +++++

Stanje: dober (rabljeno), Leto izdelave: 2004, Spindle clearance: 60 mm Turning length: 280 mm Control: Siemens 840 D Main spindle speed: 6,300 rpm Drive power - spindle motor: 3.3 kW Turret 1: disc turret Number of tools in turret 1: 8 Tool system: DIN 69880 / 25 mm X-axis travel: 90 mm Z-axis travel: 280 mm Feed force: 5,500 N Rapid traverse: 24 m/min Drive power - milling spindle: 5,000 kW Turret 2: dovetail turret Number of tools in turret 2: 6 X-axis travel: 81 mm Z-axis travel: 80 mm Feed force: 5,500 N Rapid traverse X-axis: 16 m/min Rapid traverse Z-axis: 24 m/min Machine weight approx.: 2.5 t Required space approx.: 6.0 x 2.0 x 2.0 m The INDEX ABC machine is a compact CNC lathe designed for short turning parts from bar stock. It features a slant-bed design with two independent turrets. The upper turret is primarily intended for internal machining and cutoff-side operations, while the lower turret is used for external machining. This turret arrangement ensures collision-free operation and easy programming with high tool availability. The large working area allows for optimal chip evacuation. The machining area includes two turrets: "Turret 1" - Disc turret with 7 radially arranged toolholders Ø 25 mm DIN 69880 and one mounting point for a reinforced synchronous spindle at station 8. With an adapter, tools with 1" mountings can also be used. The turret head is prepared for the V-guide bar system. - Synchronous spindle for rear-side machining, enabling parallel simultaneous machining with the main spindle. Collet chuck Ø42 or 3-jaw gripper chuck for internal and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back boring unit. Starting from the work spindle center in a clockwise direction, 3 stationary back boring tools are arranged. These are positioned on the pitch circle of the synchronous spindle. Rear-side machining takes place simultaneously with the main spindle machining. Additionally, two more tools can be mounted and can be equipped with live tooling. "Turret 2" - Turret with 6 symmetric dovetail mounts, each station featuring 2 holes for cylindrical shank tools. The following tool systems can be used: - Static tools, which can be shifted in the Z direction - Driven tools with cylindrical shank Ø25 (two positions per station) - Including bar feeder LM 3200 - + various accessories (various Ø guide half-shells/toolholders) Bjdjwbvhaopfx Afqjdk Technical Data: - Bar stock diameter: (Ø 25 / Ø 36 / Ø 52): --> round: Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW: Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagonal SW: Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW: Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> Max. bar length: 3,200 mm --> From Ø 25 mm bar, min. 2,500 mm --> Up to Ø 25 mm bar, min. 1,500 mm --> Bar support = ca. 300 = 6 bars Ø 52 mm Weight (bar loader) = 700 kg

Leto izdelave: 2007, Stanje: pripravljen za uporabo (rabljen), Swing diameter: 420 mm, turning length: 820 mm, spindle bore: 105 mm, spindle speed: 3,000 rpm, spindle power: 22 kW, X/Z travel: 280 mm / 820 mm, tool stations: 10, driven tool speed: 6,000 rpm. Machine dimensions (X/Y/Z): approx. 4,400 mm / 2,100 mm / 2,300 mm, weight: approx. 6,000 kg, control: Mitsubishi M-720BM (MAPPS 2), operating hours: 10,000 h. Includes various accessories. The driven tools have never been used, only the Y-axis has been operated. The measuring arm and ball screw of the Y-axis are as new. Documentation available. On-site inspection is possible. Bdsdpfx Aev I U Iysfqok

Stanje: rabljeno, Leto izdelave: 1979, Wheel diameter - max. 350 mm Wheel width 350 mm Module - max. 8 Module - min. Total power requirement 7.5 - 22 kW Bdjdpfx Afst Hwxzjqjk Machine weight approx. t Space requirement approx. m Gear hobbing machine with slotting device, 2-cut, broaching slotting device, without hydraulic unit

Stanje: potreben popravila (rabljeno), Machine number: 1464 Type / Model: FUW 250/IV Travel paths x-y-z: 400 - 220 - 400 mm Table size: 630 x 350 mm Clamping area of table: 700 x 300 mm Speed range: 45 to 2,240 rpm Spindle taper: SK 40 Longitudinal feed rate: 6.3 to 1,250 mm/min Cross feed rate: 6.3 to 1,250 mm/min Power supply: 7.4 kW Accessories/Equipment: Vertical head Condition: 2 controllers defective Note: Machine repair EUR 2,000 Weight: 1.45 t Dimensions: 1,500 x 1,600 x 1,800 mm Bsdpfx Afod Hl Stoqjdk

Stanje: rabljeno, Leto izdelave: 2001, Space requirement approx. 1450 x 1560 x 2620 mm Machine weight approx. 1.8 t The machine base is a heavy-duty welded construction. The coolant tank is integrated into the machine bed. The cross table is made of cast iron; the guideways are ground and scraped with adjustable gibs. The ram head is also made of cast iron, the guides are ground and scraped, and equipped with lubrication grooves. The ram head can be swiveled +/- 20 degrees. Stroke is adjustable via a side opening. The tool is positioned against the longitudinal stop. The machine is equipped with a mechanical stroke drive. The CNC rotary table controller is housed in the operator panel. The zero point can be set in any desired position of the indexing head with division options from 2-999 symmetric and 99 asymmetric divisions. Machine color: Green Indexing head color: Red --> Technical Data Adjustable stroke from 0 up to: 250 mm (No. 1) Distance column/tool holder: 425 mm (No. 2) Distance table surface/head: 430 mm (No. 3) Bdedpfewbi Awex Afqek Vertical ram adjustment: 430 mm (No. 5) Rotary table diameter (NC on axis A): 450 mm (No. 6) Longitudinal table travel (NC on axis Y): 250 mm (No. 8) Cross table travel (NC on axis X): 220 mm (No. 9) Bore at the table center: 135 mm (No. 10) Infinitely variable ram strokes per minute: 22-90 strokes/min Ram motor power (automatic brake, asynchronous): 3 kW Dimensions (ram fully raised; LxWxH): 1450x1560x2620 mm --> Digital operating manual available in German and English

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Obdelovalni center - vertikalni Proizvajalec: Hyundai KIA Model: VX380TD Leto izdelave: 2007 Bdodpsiw Ekdefx Afqsk Upravljalna enota: Fanuc serija 01-MC Območje števila vrtljajev vretena: 12.000 obr/min Priključna moč: 7 kVA Tip držala orodja: BT30 Število orodij: 20 Pomik X-osi: 500 mm Pomik Y-osi: 350 mm Pomik Z-osi: 350 mm Teža: 5.000 kg

Leto izdelave: 1990, Stanje: dober (rabljeno), CNC 4th Axis Make: NIKKEN Type: CNC-200 Year: 1990 with tailstock and base plate. Bdodpfx Afsgabu Ujqek

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT30 - Spindle drive power: 6.7 [kW] - Spindle speed: 10,000 [rpm] LINEAR AXES - Travel X/Y/Z axes: 700 x 400 x 300 [mm] - Rapid traverse speed (X/Y/Z): 50 / 50 / 56 [m/min] - Feed rate (X/Y/Z): 1 - 30 [m/min] - Distance from table to spindle nose: 330 - 630 [mm] TOOL CHANGER Bedpfxevt Eife Afqsdk - Tool changer type: Parapluie - Number of tools in magazine: 21 - Tool change time: 0.8 [sec] TABLE - Table size: 800 x 400 [mm] - Max. table load: 250 [kg] ELECTRICAL SUPPLY - Supply voltage: 220 [V] - Total power consumption: 9.5 [kVA] WEIGHT AND DIMENSIONS - Space requirement: 2,050 x 2,220 [mm] - Machine height: 2,497 [mm] - Machine weight: 2,400 [kg] ACCESSORIES - Control: Brother CNC-C00 - Interface: Ethernet / USB - Electronic handwheel - Rotary table type: 4th CNC axis integrated * Coolant tank * with high-pressure pump - Internal coolant supply (IKZ) - Electrical transformer

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Urpe slotting machine model M-300 G with tilting head, slotting machine with a stroke of 0-300mm, number of strokes per minute: 30-35-40, distance from the tool to the column: 500mm, adjustable distance from table to ram: 425-585mm, maximum distance between the tool and the body: 450mm, table surface: 800x325mm, longitudinal table travel: 550mm, cross travel: 265mm, motor power: 5.5 HP, estimated weight: 1850kg, equipped with universal chuck. Bdedpfx Afovdknzeqjk