Delovne faze samozaposlitev.

Ruthmann TB 270 VW Crafter Diesel 27,00 m

Stanje: rabljeno, Leto izdelave: 2008, Technical Details: Length: 12,192 mm Width: 2,438 mm Height: 2,896 mm Weight: 4,580 kg Gross weight: 34,000 kg Payload: 29,420 kg Refrigerated container Internal dimensions: Length: 11,585 mm Width: 2,290 mm Height: 2,545 mm Hsdpfot Hzhaox Af Tong Number of pallet spaces: 23

Stanje: rabljeno, Leto izdelave: 2024, obratovalne ure: 315 h, številka stroja/vozila: 36373, vrsta goriva: dizel, Lastna teža: 3.425 kg Dvižna zmogljivost: 250 kg Delovna višina: 2.700 cm Hnedpfxovf T Uyo Af Teg Stanje sprednjih pnevmatik: 0 Stanje zadnjih pnevmatik: 0 Maks. horizontalni doseg: 1.700 m Transportne mere (D x Š x V): 7,69 x 2,2 x 2,98 Za več informacij se obrnite na PFEIFER GROUP.

Stanje: dober (rabljeno), Leto izdelave: 2019, obratovalne ure: 840 h, dvižna višina: 15.700 mm, vrsta goriva: dizel, barva: bela, General Information Odometer reading: 10,740 km Weights Hnodpfjxqzw Aox Af Tsg Unladen weight: 3,500 kg Performance Lifting capacity: 300 kg Working height: 1,770 cm Working width: 230 cm CE marking: yes Maintenance, History and Condition Number of owners: 1 Technical condition: good Visual condition: good Additional Information Terms of delivery: EXW Max. horizontal reach: 1,100 m Max. boom angle: 140° Max. platform slewing range: 450° Transport dimensions (L x W x H): 6.23 x 2.27 x 2.99 m Last inspection: 2025-10-22 Further Information Please contact Rothlehner Arbeitsbühnen GmbH for more information. Mounted on Nissan Cabstar 35.13 EU6 Mileage: 10,730 km Operating hours: 840 Working height: approx. 17.70 m Platform capacity: 300 kg / 2 persons Slewing range: 450° Side reach: approx. 11.00 m / 80 kg Total weight: 3,500 kg Passage width: approx. 2.27 m Passage height: approx. 2.99 m Overall length: approx. 6.23 m Platform constructed from aluminum checker plate Internal energy guide Internal telescopic cylinder Electro-hydraulic proportional control Drive via vehicle hydraulic pump Start-stop diesel engine from the working basket Telescopic boom in steel Load moment limitation Rotatable aluminum work basket, 2 x 70°, Dimensions: 0.70 x 1.40 x 1.10 m Rapid, vehicle-width hydraulic outriggers Vertical stabilizers front and rear Support plates with holders Driver’s cab collision protection Hour meter Mounted on carrier vehicle Rotating beacons, yellow, 2 units, on driver’s cab Flashing beacon yellow under working basket Tool tray in the work basket Aluminum side panels, 100 mm, all round, fixed Stainless steel toolbox, Size: approx. 650 x 650 x 1200 mm Hinged lid with gas strut, opens upwards, lockable Mounted at rear right of platform The unit will be technically overhauled, is fully operational, and will have its TÜV certification and safety inspection renewed. All documentation is available. Service and spare parts supply are guaranteed. Why do we not quote prices? Our pricing is partially dependent on the customer's requirements regarding the desired level of optical and technical refurbishment, or on possible special equipment. Many customers prefer these individual customization options. All questions will be gladly answered in a personal consultation. Please include your telephone number with your inquiry, so that our staff can provide expert advice.

Stanje: rabljeno, Leto izdelave: 2024, Delovna ploščad za tovornjake Hnedpfjvb Rdwjx Af Teg

Stanje: rabljeno, prevoženi kilometri: 48.677 km, moč: 130 kW (176,75 KM), prva registracija: 01/2011, vrsta goriva: dizel, skupna masa: 3.500 kg, barva: bela, vrsta prenosa: mehanski, Oprema: ABS, elektronski program stabilnosti (ESP), parkirni grelec, žerjav, Nissan Cabstar 35.13 PALFINGER Aerial Platform 26 Meters 4x2 Hnedpfx Aopvli Sef Tjg Suspension: leaf spring Wheelbase: 2.95 m PALFINGER Aerial Platform Model: P 260 B Year: 2011 4x hydraulic extensions 4x hydraulic outriggers 1x work basket (1.40 m x 0.70 m x 1.10 m) Equipment: - electric windows - auxiliary heater We are also happy to assist you with financing/leasing options in cooperation with our partners. All information without guarantee. Subject to error and prior sale.

Stanje: novo, barva: rdeča, Leto izdelave: 2025, General Information Intended use: Construction Powertrain Fuel type: Electric Weights Unladen weight: 1,975 kg Functional Data Lifting capacity: 200 kg Lifting height: 1,600 cm Working height: 1,800 cm CE marking: Yes Condition Overall condition: Very good Technical condition: Very good Visual condition: Very good Hnedpfxexpc A De Af Tog Additional Information Delivery terms: EXW Max. horizontal outreach: 11.30 m Max. boom articulation angle: 90° Max. work platform oscillation angle: 999° Transport dimensions (L x W x H): 7.82 x 1.84 x 2.14 m Country of manufacture: DE Further Information Please contact Rothlehner Arbeitsbühnen GmbH for more information. Stock new machine, year of manufacture 2025 Available at short notice, subject to prior sale Delivery conditions, possible special equipment, and price on request Working height: 18.00 m Platform capacity: 200 kg / 2 persons Slew range: Continuous Side outreach: 11.30 m / 80 kg Own weight: approx. 1,975 kg Passage width: 2.06 m Minimum passage width: 1.84 m Passage height: 2.14 m Minimum passage height: 2.00 m Total length: 7.82 m Minimum total length: 6.60 m Proportional control Energy supply via internal flat cable Drive: Battery 4 x 6V / 195 Ah/5h, fully automatic charger Telescopic boom: aluminum, seamless Profile guide: nylon-stainless steel Load moment limiter Articulating jib: 600 mm Work platform: aluminum, rotatable 2 x 45°, size: 0.70 x 1.20 x 1.10 m 230 V socket in work platform Tool trays in work platform Hour meter Fast hydraulic outrigger system with support pressure monitoring Support plates 40 x 40 x 2.7 cm with holder Hydraulic drive for maneuvering up to 15% grade

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2014, obratovalne ure: 3.040 h, moč: 90 kW (122,37 KM), Multitel ALU 160 Work Basket – 16.30 m on Nissan Chassis (Category B Driving License) Year of Manufacture: 2014 | Registration: 1G | Condition: Excellent A Reliable Work Platform for Professional Use The Multitel ALU 160 work basket, mounted on a Nissan vehicle, offers the ideal combination of mobility, efficiency, and user-friendliness. With a Category B driving license requirement, this model is the perfect choice for field service, petrol stations, utilities, and assembly companies. Technical Specifications Working height: max. 16.30 m (operational up to 16.5 m) Horizontal outreach: up to 7.95 m at 200 kg (10.5 m with reduced load) Basket capacity: 200 kg Working range: 360° turret rotation Basket rotation: ±60° Basket dimensions: 1.40 × 0.70 × 1.10 m Outriggers: 4 hydraulic stabilisers Transport dimensions (L × W × H): 6.69 × 2.10 × 2.78 m Unladen weight: 3,350 kg | Permissible total weight: 3,500 kg Engine: Diesel 90 kW | Standard: EURO 5 Mileage: approx. 76,800 km | Operating hours: approx. 3,040 h Key Advantages Suitable for Category B drivers Compact, reliable, and manoeuvrable design 360° working radius for maximum flexibility Serviced and ready for immediate use Service and spare parts available in Croatia Independent inspection possible (TÜV Croatia or SGS Adriatica) Model Description The Multitel ALU 160 is characterised by its robust aluminum construction and reliable hydraulic system. Thanks to four hydraulic outriggers and 360° rotation, it enables safe and stable operation under all conditions. Easy operation and compact dimensions make it ideal for work in urban areas and confined spaces. Inspection and Assessment All vehicles undergo a detailed inspection in our specialist workshop (Trigon Dizalotehnika Servis) – including mechanical, hydraulic, and bodywork components. On request, we can also arrange an independent inspection by accredited bodies TÜV Croatia d.o.o. or SGS Adriatica d.o.o., including: - Functional check of the lifting system and stability/safety switches Hjdpfx Afexvyyao Tong - Visual and technical analysis of the supporting structure and hydraulics - Technical condition report with photographic documentation - Certificate of conformity according to EU safety directives (Directive 2006/42/EC) This gives the customer additional assurance and allows them to independently verify the condition of the machine before purchase. Documentation and Service - Service booklet and documentation available for inspection - Assistance with registration and import - Delivery to your location in Croatia or the EU - Leasing or financing options available - Trade-in of used vehicles possible by arrangement TRIGON DIZALOTEHNIKA d.o.o. Importer and general representative for Multitel and GSR aerial platforms for Croatia, Slovenia, Montenegro, Bosnia and Herzegovina, and Serbia. More than 30 years’ experience in sales, service, and rental of aerial work platforms. First-hand – Service, spare parts, and technical support available throughout Croatia.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, nosilnost: 250 kg, tip droga: dupleks, Tip: GSR B240PX COMPACT Stanje: NOVO Leto izdelave: 2025 Delovna višina: maks. 23,7 m Stranski doseg (250 kg): maks. 8,25 m Stranski doseg (80 kg): maks. 12,3 m Hnsdpsxvx S Ujfx Af Tog Nosilnost košare: maks. 250 kg Zasuk košare: 2 x 70° Delovno območje: 450° Mere aluminijaste košare: 1,4 m x 0,7 m Barva: bela 4 hidravlični stabilizatorji Največja dovoljena masa vozila: 3500 kg (B-kategorija) Vsi deli izključno iz EU porekla. Garancija: 24 mesecev. CENA 99.500 € 10 % popust SKUPNA CENA 89.550 € AKCIJSKA PROMO CENA

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending of pipes up to an external diameter of 100 mm, both stationary and directly at the installation site. Transport is easy using a pallet truck or the optional rollers. A robust three-phase motor and a precision gearbox provide high-performance drive power. The machine impresses with its compact and slim design and a very open bending area. Precise position sensing directly on the bending axis ensures optimal bending accuracy. The bending angle is quickly and easily set via a convenient, menu-guided user interface in 14 languages with touchscreen control, guaranteeing highly intuitive operation. For complex bending tasks, up to 100 bending programs can be stored, each featuring a sequence of up to 8 bends per geometry. Thanks to the multifunctional control system, both forward and return bending speeds can be variably set, and an adjustable overbend function compensates for the material’s springback. With the help of four material characteristic curves, the machine automatically overbends the material to the required angle, delivering precise results. The “stationary tube, rotating tool” principle minimizes the required workspace. For thin-walled tubes, sliding shoes are used to ensure wrinkle-free bends and to achieve minimal deformation—ideal for stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent without issue. Using the small-radius bending device (KBV), extremely small bending radii are possible. POTENTIAL APPLICATIONS: • Plant construction • Hydraulic piping • Serpentine bending • Prototyping • Sanitary and heating installation • Shipbuilding Hedpfx Ajndk N Ajf Tjng TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase 400 V • Bending radius up to 500 mm • Multifunctional machine control with bending angle adjustment (0.1°) • Maximum bending angle 240° • Safety foot switch with emergency stop • Weight: 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 series, with bending radius from 45 mm, incl. 40 mm hex shaft • Profile bender PB20 – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • Small-radius bending device KBV • Special tools according to customer specifications • Software customization for special tasks OUR SERVICES: • Welcome to carry out test production in our in-house demo room • Consultation and information meeting at your site • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your site

Stanje: rabljeno, prevoženi kilometri: 108.250 km, moč: 220 kW (299,12 KM), prva registracija: 04/2015, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, naslednji pregled (TÜV): 10/2026, barva: rumena, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: ABS, klimatska naprava, navigacijski sistem, Top-maintained Mercedes Benz Actros 1830 with Ruthmann T 330 HV 12 aerial work platform, offering a working height of 33 meters, 320 kg load capacity or up to 3 persons, 20.70 meters lateral outreach, with minimum stabilisation, 1,000 Volt insulation possible, box body measuring 1.60 m x 2.38 m x 1.10 m, hoisting and slewing lock, large aluminium work basket, newly UVV-inspected and serviced by Ruthmann, and much more. Aerial Platform Data Articulated boom lift Ruthmann T 330 HV 12 Working height up to approx. 33 m (manufacturer's specification) 4-point hydraulic stabilisers Minimum stabilisation 20.70 m lateral outreach Load capacity 320 kg or 3 persons Basket dimensions: 1.71 m length x 0.85 m width x 1.10 m height with socket outlet Insulation to DIN VDE 0682-742 against 1,000 Volts with GRP (fibreglass) work basket possible Permitted wind speed: 12.5 m/s Side force at platform: 400 N Rotation and slew angle: 2 x 250° 15° lifting and 20° slewing lock Emergency controls on lower chassis Special boom lock for subsequent installation of rear underride guard Exchange device for rapid change of aerial platforms Large tool storage box at the rear on the loading area, dimensions: 1.60 m x 2.38 m x 1.10 m with side roller shutters 4 non-slip outrigger pads + holders Platform floodlights 3,944 operating hours according to meter UVV inspection by Ruthmann performed new in 09/2025 Ruthmann service carried out new in 09/2025 Registered as a self-propelled working machine (exempt from vehicle tax) Very well-maintained condition Truck Data Driver’s cab M CompactSpace with rear window Wheelbase: 4,200 mm Engine OM936, R6, 220 kW (299 hp), 1,200 Nm Euro VI engine version Drive: 4x2 Mercedes Benz PowerShift 3 automatic transmission, G 140-8/9.30-0.79 Air conditioning Hnsdpfx Asxuydpsf Tjg Front and rear axles with leaf suspension Weight variant 18.0 t (8.0/11.5) Front axle: 8.0 t, Rear axle: bevel gear 300, planetary, 13.4 t Front springs: 8.0 t, 3-leaf; Rear springs: 11.5 t, heavy-duty HY axle ratio i = 4.833 Disc brakes front and rear Electronic braking system with ABS and ASR Cruise control Stability control assistant Stabilisers on front and rear axle Reversing camera Navigation system LED daytime running lights LED warning light bar on cab roof 2 additional strobe lights at front of cab roof Air horn on cab 290-litre fuel tank Driver’s comfort suspension seat Very good and well-maintained condition TÜV (roadworthiness inspection) renewed in 10/2025 Registered as self-propelled working equipment (tax-exempt) Price NET plus 19% VAT. Attractive financing offers available upon request. All details without guarantee. Subject to errors and prior sale. Internal vehicle number: 2567