Preskusna črpalka

Rothenberger RP50-S

Leto izdelave: 2011, Stanje: zelo dobro (rabljeno), This is a complete plant for house construction. The prices are listed for each item. Consisting of the following individual components (see attached document): Pictures will follow and are already included in the attached document. Table 1 (Insertion and clamping of the frame work) €34,500 - Height-adjustable longitudinal transport with 3 hinge conveyors and paneling - Pneumatic transverse clamping - Connections for compressed air and electricity Table 2 (Laying and securing the first sheathing) €25,300 - Longitudinal transport with 3 hinge conveyors and paneling - Pneumatic transverse clamping - Connections for compressed air and electricity Intermediate Transport, 3 m long €4,600 (Parking station for multifunction bridge) - Longitudinal transport with 3 hinge conveyors Table 3 (Laying and securing the second sheathing, turning of the element onto the next table) €35,650 - Longitudinal transport with 3 hinge conveyors and paneling - Pneumatic transverse clamping - Connections for compressed air and electricity - Hydraulic turning device Table 4 (Installation of electrical and insulation) €34,500 Nsdpfxju D Amgs Adyowb - Cross transport with rollers and paneling - Cross travel of the table - Connections for compressed air and electricity - Hydraulic turning device Table 5 (Laying the first sheathing and securing the second side) €32,775 - Longitudinal transport with 3 hinge conveyors - Cross transport with rollers - Pneumatic transverse clamping - Connections for compressed air and electricity Intermediate Transport, 3 m long €4,600 (Parking station for multifunction bridge) - Longitudinal transport with 3 hinge conveyors Table 6 (Laying and securing the second sheathing) €28,750 - Longitudinal transport with 3 hinge conveyors - Pneumatic transverse clamping - Connections for compressed air and electricity Table 7 (Erection and distribution table) €29,900 - Longitudinal transport with 3 hinge conveyors - Hydraulic swinging unit - Table cross-travel unit - Upper guide for holding the walls vertically Manual area gantry with vacuum lifter on Table 2 €13,800 (Laying the first sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Manual area gantry with vacuum lifter on Table 3 €13,800 (Laying the second sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Manual area gantry with vacuum lifter on Table 5 €13,800 (Laying the first sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Manual area gantry with vacuum lifter on Table 6 €13,800 (Laying the second sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Wall rack 1: 12 m long x 24 bays €11,500 Wall rack 2: 12 m long x 20 bays Vacuum lifter with column slewing crane €9,200 1 Spreader beam 2 t Abus €20,125 1 Spreader beam 2 t

Stanje: rabljeno, Leto izdelave: 2021, premer žaginega lista: 800 mm, vrtljajska hitrost (min.): 1.450 obr/min, moč: 5,5 kW (7,48 KM), Cut-off Saw AS Very good, well-maintained condition Saw blade diameter: 800 mm Sturdy steel tube base frame High-performance saw motors Pneumatic material clamps (3 units, vertical) Two-hand safety controls Coolant system Protective cover Nwjdpfx Adsd Szf Njyob Optional with length measuring system or automatic positioning system Available as a saw-drilling automatic machine or saw-punching automatic machine on request.

Stanje: dober (rabljeno), Diamond core drilling machine Nwsdpfx Adsb A H U Aoyob - Drill stand - Vacuum pump - Water pump tank - Core bits: Ø 15/20/3x 25/3x 28/32/40 mm

Stanje: novo, MAXION UNIMAX 3 AV Column Drilling Machine Modern, precise production drilling machine based on the proven UNIMAX3 concept, featuring a stepless feed drive, automatic tool ejector, and standard chip break control, as well as a forward/reverse selector switch. The display shows feed rate, spindle speed, and drilling depth, with programmable drilling depth. Njdpfegv I U Sjx Adyewb Technical Data: Continuous drilling capacity in St 60: 25 mm Standard drilling capacity: 30 mm Tapping capacity: M20 Spindle: MT 3 Drilling depth: 125 mm Throat depth: 260 mm Distance spindle/table: 90 to 840 mm Table area: 500 x 400 mm Column diameter: 110 mm Total height: 1,900 mm Weight: 280 kg Motor power: 0.8/1.5 kW Infinitely variable spindle speeds: Range A: 80–1,440 rpm Range B: 180–3,200 rpm For further details, please refer to the attached data sheet. Additional models available upon request.

Stanje: novo, Table diameter: 330 mm Table load capacity: 350 kg Swivel range: 135 degrees Tilt adjustment: manual / machine: manual Max. rotation speed: 5 rpm, stepless Vertical table load capacity: 120 kg Total power requirement: 0.125 kW Machine weight: approx. 52 kg Required space: approx. 640 x 490 x 630 mm Welding positioner with: Nodpfjh D Svgjx Adyjwb - Foot switch - Manually tiltable and swivellable - Steplessly adjustable speed - 250 ampere welding current transmission - Borehole in faceplate: 40 mm.

Stanje: rabljeno, prevoženi kilometri: 255.100 km, moč: 88 kW (119,65 KM), prva registracija: 12/2016, vrsta goriva: dizel, največja dovoljena obremenitev: 820 kg, skupna masa: 2.300 kg, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 3, dolžina tovornega prostora: 2.100 mm, Leto izdelave: 2016, - Used Van: Ford Connect Van L2 long wheelbase, Trend trim. - Year: 2016, Engine: 1.5 TDCi 120 HP Euro 6, Mileage: 255,100 km. - 3-seater van, long wheelbase. Load compartment length: 2,100 mm, equipped with folding bulkhead and foldable passenger seat for transporting long loads. Load floor lined with marine plywood, fitted with 2 additional cargo area security locks. - Trend trim features: Air conditioning, Radio-Bluetooth with USB, Rear parking sensors, Fog lights, On-board computer, Central locking, Two keys, Spare wheel, Driver airbag, ABS, ESP, TCS. - Bodywork shows dents on both rear wheel arches and some scratches. Interior in good condition. Mechanics serviced and fitted with NEW CLUTCH. _____ CARLO MAURI S.r.l. - Lurago d’Erba - Via Vallassina 6 - Tel. 031.699.049 – Sales contacts: Emanuele, Luca, Giuseppe, Davide. - Lurago d’Erba (Como Province), Lombardy Opening hours: Monday to Friday: 8:30 / 12:15 - 14:00 / 19:00 Saturday: 8:30 / 12:00 - 14:00 / 17:30 - Certified mileage. - Custom financing options available. Njdpfx Ajvv Eiqjdyswb Carlo Mauri S.r.l. declines all responsibility for any unintentional inconsistencies in this advert, which does not constitute a contractual commitment. Displayed prices are exclusive of VAT and transfer of ownership.

Stanje: dober (rabljeno), Vice, bench vice, engineer’s vice, parallel vice, heavy-duty vice - Parallel vice: jaw width 150 x 30 mm - Clamping width: 235 mm - Dimensions: 490/220/H195 mm Nodpfovm U Htox Adyewb - Weight: 26 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, nosilec vretena: MK 2, poteza s peresom: 120 mm,

Leto izdelave: 2013, Stanje: pripravljen za uporabo (rabljen), I am selling a Renojava spraying machine, year 2013. Working width: 80 mm Element height: up to 80 mm Feed conveyor length: 1.60 + 2.60 m Technology opening: 200 mm / Minimum element length: from 300 mm. Nodpfx Aoh Ibivedyowb Total length: 4.40 m Ring arm system for guns on both sides. Pump included. Feed system with motors. Good condition. Available immediately.

Stanje: novo, Leto izdelave: 2026, A700 Vollautomatische Gehrungssäge für Massivholz, 9m Vollautomatisches Schneiden großer Aluminiumprofile mit benutzerfreundlicher Automatisierung. Legen Sie einfach ein beliebiges Aluminiumprofil ein – die Maschine erkennt es automatisch und schneidet es mit hochpräziser Servomotor-Materialpositionierung gemäß der Jobliste. Excel-Auftragslisten können via WLAN zur effizienten Eingabe umfangreicher Schnittlisten importiert werden. Für jedes eingelegte Aluminiumprofil, unabhängig von der Länge, misst ein Lasersensor die Länge. Unser leistungsfähiger Optimierungsalgorithmus berechnet in Echtzeit die optimale Schnittreihenfolge für minimalen Verschnitt. Die Maschine schneidet die berechnete Liste vollautomatisch und ohne Unterbrechung ab. Es sind keine weiteren Eingaben Ihrerseits nötig – legen Sie einfach das nächste Aluminiumstück ein. Einfache, schnelle Alternative zur Doppelgehrungssäge: Geben Sie einfach die gewünschten Längen und Winkel ein (oder importieren Sie sie) und starten Sie den Schnittvorgang. Die Maschine produziert kontinuierlich präzise und schnell Ihre maßgenauen Gehrungsteile. • Vollautomatischer Schneidbetrieb mit Stangenförderung und Längenzuschnitt • Intuitive Benutzeroberfläche für den automatischen Betrieb – Auftrag eingeben und in Sekunden schneiden • Vereinfachtes Schneiden von Einzelteilen, Batches oder umfangreichen Excel-Joblisten • Gebündelter Multi-Stangen-Zuschnitt und Stückzählung • Remote-WIFI-Excel-Joblisten-Import mit umfangreichen Datenmapping-Funktionen • Voll einstellbare Säge- und Materialvorschubgeschwindigkeiten für maximale Produktivität • Automatik-Optimiermodus mit Laserlängenmessung und Verschnittoptimierung (optional) • Automatischer Etikettendruck für Teile auf Basis der Jobliste (manuelle Etikettenanbringung, optional) • Inline-Direktdruck auf Material ohne Bedienereingriff (optional) • Barcode- oder QR-Code-Druck sowie Scannen zur Auftragserfassung (optional) • Automatischer Servo-Antrieb zur Gehrungseinstellung bis ±75° (optional) Optimal geeignet für: • Rahmen- und Fachwerkproduktion • Herstellung von Gehrungs-Holzkonstruktionen • Massenzuschnitt von Holz • Möbelbau • Herstellung von Pflanzgefäßen und Boxen Modell: A700 Länge: 9 m Materiallänge: 8580 mm Schubkraft: 20 – 40 kg Nwsdpsmdq I Isfx Adyjb Software: Optimiser HOCHWERTIGE, IN AUSTRALIEN HERGESTELLTE MASCHINEN.