EKSTRUDER ROLLEPAAL T-REX 2-90-30

ROLLEPAAL T-REX 2-90-30

Stanje: novo, Load capacity 500 kg Number of suction cups: 6 Diameter of suction cups: 215 mm Vacuum Lifter VH 6-500 For horizontal transport of smooth, dry, and airtight panels. Robust load-bearing structure made of steel, painted in RAL 2000 with low dead weight. Psdpfeq Sc Auex Andogn Consisting of: - 1x Galvanized longitudinal beam, length 2,400 mm - 3x Galvanized crossbeams, each 1,000 mm in length - 6x Spring-mounted, articulated, and adjustable suction cup holders - 6x Suction cups Ø 215 mm; in case of wear, the sealing ring can be replaced separately from its metal carrier, cost-effectively and without tools - 6x Ball valves for individually shutting off each suction cup, enabling smaller formats to be lifted without moving the suction cups or beams - 1x Spiral connection cable, small coil: * extendable to 3,500 mm, version as extension cable with CEE plug and coupling * routed next to the load chain to the hoisting device - Low-maintenance, high-quality, dry-running rotary vane vacuum pump with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3-phase 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Isolation transformer integrated into the control system (necessary if the vacuum lifter is connected via the crane trolley and there is no neutral conductor) - Extendable operator handle to 1,000 mm from beam center. Sturdy metal pouch for your crane control included at no extra charge. - Operation "Suction / Release" via manual slide valve: Wear-free and highly robust manual slide valve for safe suction and release after pressing the release button (double-action release according to EN 13155) - Control and safety unit for vacuum lifter: * Robust control box * Contactor circuit for the vacuum pump * Safety warning device with audible signal * Vacuum gauge with danger zone indication * Large vacuum reservoir with safety non-return valve * Double-action operation for load release - Fine dust filter to protect the vacuum pump - Comprehensive and easily understandable documentation - Warranty on material and manufacturing defects: one year in single-shift operation (excluding wear parts) Initial inspection according to UVV 18, VBG 9a with CE declaration of conformity according to EN 13155 - Packaging suitable for truck transport.

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), Single-screw extruder WEBER NE5 1-30:D with 2 co-extruders WEBER ZE30 Year of manufacture: 2001 Output: approx. 200 kg/h Screw diameter: 50 mm Application: For processing PE, PP, or for producing three-layer pipes, or for pipe sheathing and stripe application The system was used for manufacturing heating pipes Condition: Very good 2 x WEBER ZE30 co-extruders Pjdpfohy Tp Djx Andogn Screw diameter: 30 mm The three-layer pipe system is my property Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany

Leto izdelave: 2024, stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Podpfxohx Elfs Andogn Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Control cabinet and operator panel The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.

Leto izdelave: 2010, stanje: rabljeno, METAL SHEET ROLL FORMING LINE FOR TILE PANELS ILKWANG Reduced price for urgent sale Scope of supply: 1. Decoiler 2. Front shear + coil guiding table 3. Film applicator 4. Base parts of cassette-type roll forming machine 5. Roll forming machine for “COPPO” type tile 6. Roll forming machine for “ATIIKA” type tile 7. Roll forming machine for “T177.5” type tile 8. Shearing (cutting) machine: flying cut-off type 9. Stretching section 10. Automatic stacker 11. Electrical control panel Technical specifications: - Manufacturer: IL Kwang (Korea) - Year of manufacture: 2010 - Material: Pre-painted galvanized steel sheet (ASTM A 526 / JIS G 3302 SGCC) - Tensile strength: 250 ~ 320 MPa - Maximum coil width: 1250 mm - Coil thickness: 0.35 – 0.8 mm - Maximum coil weight: 15 tons - Maximum outer coil diameter: 1300 mm - Coil inner diameter: 508 mm - Line speed (length > 5 m): Max. 8 m/min - Speed control: Frequency control by inverter Podpfx Ajymbfysndegn - Main voltage: 380 / 50 V/Hz 3 Phase - Dimensions (L x W x H): Approx. 30 x 8 x 5 m Component manufacturers: - Motor: Siemens (ICE type) - PLC + Inverter: Siemens 7 - Servo: Mitsubishi (with C.E.) - Touch screen: Pro-face (with C.E.) - Electrical components: L.G (with C.E.) Main voltage: 380 / 50 V/Hz 3 Phase Line speed (length > 5 m): Max. 8 m/min Material: Pre-painted galvanized steel sheet (ASTM A 526 / JIS G 3302 SGCC) Tensile strength: 250 ~ 320 MPa Maximum coil width: 1250 mm Coil thickness: 0.35 – 0.8 mm Maximum coil weight: 15 t Maximum outer coil diameter: 1300 mm Motor: Siemens (ICE type) PLC + Inverter: Siemens 7 Servo: Mitsubishi (with C.E.) Touch screen: Pro-face (with C.E.) Electrical components: L.G (with C.E.) Speed control: Frequency control by inverter Coil inner diameter: 508 mm Dimensions (L x W x H): Approx. 30 x 8 x 5 m

Stanje: generalkompletno obnovljen (rabljeno), skupna masa: 7.800 kg, Jaw opening: 650 x 450 mm Throughput: 12 - 60 m³/h Gap width: 35 - 150 mm Psdpjq Tth Tofx Andogn Weight: 7,800 kg Power requirement: 45 kW completely workshop overhauled and newly fitted with bearings

Leto izdelave: 2023, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Naš kompaktni ekstruder model EX20-25d Proizvajalec: PMH GmbH Premer polža [mm]: 20 Dolžina polža [L/D]: 25 Hitrost vrtenja polža [min-1]: 10–192 Polž: nitriran Navor: 55 Nm Pogon: trifazni motor s frekvenčnim pretvornikom Pogonska moč [kW]: 1,1 kW Material cilindra: nitriran Pgedpfx Aneq R Tkwodon Električne priključne vrednosti: 3 / N / PE Napajalna napetost [V]: 400 V pri 50 Hz Krmilna napetost [V]: 24 V Keramični grelni trakovi [W]: 1200 W Število grelnih trakov: 3 Maksimalni iztis: pribl. 5 kg/h Maksimalna procesna temperatura [°C]: 300

Leto izdelave: 2007, stanje: zelo dobro (rabljeno), Vacuum Packaging Machine VC999 07P, Year of Manufacture: 2007. Connection: 400V. Pjdpof Srcfofx Andsgn Chamber dimensions approx. 88 x 50 x 15 cm, equipped with 2x Rietschle CLFH 220 vacuum pumps. Year of Manufacture: 1998, output: 2x 5.5 kW. Very good condition, operates flawlessly.

Leto izdelave: 2007, stanje: zelo dobro (rabljeno),

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Winch incl. Pjdpfeq N E U Asx Andogn Lifting capacity max. 2 t at 2.7 meters Lifting capacity max. 1 ton at 5.3 meters Operating hours: 270 h Electric: yes

Leto izdelave: 2025, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Nous proposons une extrudeuse monovis neuve en stock. L'installation n'a servi qu'à des fins de test et se trouve donc dans un état excellent, proche du neuf. Idéale pour les laboratoires, le développement de matériaux, les petites séries ou les applications d'extrusion sur mesure. --- Caractéristiques techniques & équipements • Diamètre de la vis : 30 mm • Rapport L/D : 25:1 • État : neuve / uniquement essais • Entraînement : moteur SEW 4 kW avec réducteur • Zones de chauffe : 4 zones avec régulateurs de température • Armoire électrique : comprise dans la livraison • Filière : filière à brins modifiable ou réalisable sur demande • Conception : construction robuste pour laboratoire / installation pilote Pedpfexxim Iox Andjgn • Mobilité : châssis roulant avec roulettes renforcées – facile à déplacer --- Points forts • Conception très compacte • Idéale pour filaments, profils, essais en laboratoire et tests de matériaux • Fût et vis en excellent état (voir photos) • Disponible immédiatement en stock