Pripravljalnik ledene vode / Hladilnik

Rivacold RED Compact V7

Machine Description and Technical Data
2.1 Machine Description

The RED COMPACT units are delivered fully pre-assembled and require only electrical connection and hydraulic coupling on site.

Main components:

A: Self-supporting frame with stainless steel cladding (panels 1–6 removable)

B: Tank with evaporator

C: Condenser unit

D: Temperature controller

E: Control cabinet

F: Hydraulic circuit with pump (second pump optional)

2.2 Structure

The compact monoblock housing contains all components necessary for operation. The external cladding is made of stainless steel, with individual panels being removable for maintenance work.

2.3 Tank

The stainless steel tank houses the evaporator block. It is insulated with high-density polyurethane foam. A circulation fan provides water movement within the tank.

2.4 Condenser Unit

The condenser unit can operate with either cooling tower or well water, depending on the order specification. It supplies the evaporator block and is located beneath the tank.

2.5 Temperature Controller

The controller is a modern microcomputer with a high-resolution display and LED indicators for operating statuses. The control system is programmed to provide maximum operational safety with the simplest possible operation.

2.6 Control Cabinet

Dusdpfoxvca Asx Af Ssr
The control cabinet is dust- and splash-proof. It contains:

• Main and emergency switches
• Contactors, thermal relays, fuses
• Safety transformer for control circuits

Access is provided by removing panel 1 below the temperature controller.

2.7 Hydraulic Circuit with Pump

Panel 3 must be removed for connection. The following ports are provided:

A – Water make-up (T1): Connection to the water supply; fill level controlled via float valve.

B – Return (T2): Return flow from consumers.

C – Overflow (T3): Connection to the operating wastewater outlet.

D – Chilled water outlet (P1): For supplying consumers; the shut-off valve must be opened before commissioning. A second pump (P2) is optional.

E – Condenser water supply:
The shell-and-tube condenser can be operated with well water or cooling tower water:

Scheme A – Well water: Use the small ports C1, C2 (inlet and outlet). The large port remains closed. Optionally, a pressure-regulated valve control can be installed.

Scheme B – Cooling tower water: Use C3 and C1/C2 in parallel to increase the flow cross-section. It is recommended to install a mechanical filter at the water inlet to prevent contamination.

Manufacturer:
FIC S.p.A. – Via Trivulzia 54, 23020 Mese (SO), Italy
Model: RED COMPACT V.7

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.