Vijačni kompresor

Renner RSDK-B 3,0 - 10 bar

Stanje: novo, Drilling capacity in steel (diameter): 40 mm Throat depth: 275 mm Drilling stroke: 120 mm Spindle taper: MT 4 Speed range: 75 - 3200 rpm Table traverse (cross): 190 mm Table traverse (longitudinal): 490 mm Table clamping surface: 730 x 210 mm Connection voltage: 400 V Feed rates: 0.1 - 0.18 - 0.26 mm/rev Total power requirement: 1.1/1.5 kW Nodpfx Asupw T Dobbskt Machine weight: approx. 0.35 t Space requirement: approx. 0.8 x 0.75 x 1.85 m Drilling/milling machine equipped with: • Drilling capacity 40 mm • Milling capacity 32 mm • Tapping device • Cross table with adjustable guides • Quill feed • Gear transmission

Stanje: skoraj kot novo (rabljeno), Oprema: Na voljo je tipska ploščica, Used stainless steel agitator vessel on stainless steel pallet with castors and propeller agitator Type: SBPA1000RWP Article number: 10862 Volume: 907L Design: Upright configuration on stainless steel transport pallet with castors Construction: Single-walled, min. 2mm wall thickness Material (product contact): 1.4301 stainless steel Surface finish: Satin exterior, interior BA (IIId) Internal welds: Pickled, passivated, and brushed Operating pressure: Atmospheric Top: Central crossbar with two hinged lid halves Bottom: Dished bottom with drain groove Tank dimensions: Tank diameter: 1080mm Total height: 1915mm Overall width: 1200 x 1150mm Distance from outlet to floor: 400mm Foot height: 240mm Features: 1x Hinged lid, central crossbar with two hinged lid halves, stainless steel mesh guard below the lid as reach-in protection (removable), latching function (lids can be latched open) 1x Spare nozzle DN50 DIN11851 on top 1x DN50 DIN32676-A Tri-Clamp ball valve as outlet fitting, PTFE gasket 1x Stainless steel transport pallet 4x Swivel castors, 2x with brake 1x Nameplate Agitator: Propeller agitator Suitable for viscosities up to 500 mPas Manufacturer: Schwarzer Rührtechnik GmbH Type: SRT8-1500 Power: 0.75 kW Speed: 1410 RPM Operating voltage: 3PH 400V - Heavy-duty agitator shaft secured to agitator motor, non-removable - Agitator shaft balanced for smooth running in the specified speed range - 1 mixing propeller Ø 150mm screwed onto shaft end. Mixing propeller made from solid cast stainless steel, high-gloss polished - 4x neoprene rubber-metal mounts, motor mounted on vibration-damping buffers, hardness 70 Shore, neoprene resistant up to 100°C Agitator control: CEE plug switch on vessel, on/off switch, emergency stop, no-voltage release, and phase inverter Nodsv Ha Uijpfx Abbekt Stepless speed control of the agitator motor via compact external frequency inverter, make: Optidrive. With digital frequency or speed display. Includes potentiometer, on/off switch. Pre-programmed for agitator operation. Operating voltage 3PH 400V Mounted on the vessel with stainless steel bracket.

Stanje: novo, Dimensions (L x W x H): 780 x 480 x 1050 mm Weight: 79.5 kg Number of drawers: 6 pcs. The tool trolley is equipped with 6 storage drawers. Fitted with 2 fixed and 2 swivel castors, one of which has a brake. The tool trolley is fully lockable thanks to an integrated lock. Drawers can be locked individually. All drawers feature a quick-release mechanism and soft-close damping. Height-adjustable storage compartment behind the door. Central locking system with 2 keys. Nkedsu Imk Rspfx Abbst The tool trolley is equipped with 155 pcs. of tools: 3 socket sets: 1/4", 3/8", 1/2". Ratchet combination spanner set from 6 - 22 mm. Extensions for socket sets, various Allen keys from 1 - 10 mm. Various screwdriver sets. Assortment of pliers.

Stanje: novo, Welding current: 15 - 40 A Cutting capacity: 1 - 16 mm Open circuit voltage: 96 V Compressed air connection: min. 4 bar Connected load: 3.6 kW Supply voltage: 230 V Nsdpfeupxfhsx Abbskt Weight: 9.0 kg Dimensions (LxWxH): 371 x 153 x 232 mm Digital display. Overvoltage protection. Plasma torch. Earth cable. Pressure reducer with moisture separator. Equipped with IGBT technology.

Stanje: novo, Cutting capacity at 90 degrees (round): 125 mm Cutting capacity at 90 degrees (square): 125 mm Cutting capacity at 90 degrees (rectangular): 127 x 125 mm Nkodpfxjupw R Ns Abbst Saw blade dimensions: 1435 x 12.7 x 0.65 mm Blade speed: 38 - 80 m/min Total power requirement: 0.95 kW Machine weight: approx. 18 kg Dimensions (L x W x H): 720 x 380 x 450 mm Both straight and mitre cuts can be performed at angles between 45 and 90 degrees. With the metal band saw you will work not only precisely, but also quickly: the blade speed can be variably adjusted between 38 and 80 meters per minute. Weighing only 25 kilograms, the saw is mobile and can be used on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 5.780 h, Funkcionalnost: popolnoma funkcionalen, moč: 7,5 kW (10,20 KM), obratovalni tlak: 11 letvica, temperatura okolja (min.): 3 °C, okoljska temperatura (maks.): 45 °C, vrsta hlajenja: voda, Oprema: Na voljo je tipska ploščica, hladilni sušilnik, Kaeser Compressed Air Complete System - SM 13 + TA 8 + OKS (Otto Klein) For sale is a complete, fully functional compressed air system consisting of: 1. Kaeser SM 13 screw compressor (Aircenter, detailed information attached) 2. Kaeser TA 8 refrigeration dryer (please refer to the attached image for detailed information) 3. OKS Otto Klein compressed air receiver (please refer to the attached image for detailed information) The unit is already equipped with an internal tank and an integrated cooler. In addition, a separate cooler and compressed air receiver, as shown in the pictures, are also included. This means that both the internal equipment is complete and the additional accessories are part of the delivery package. Nkodpfjxwbdvjx Abbot The system has been regularly serviced, is in very good operational condition, and is ready for immediate use. Our service promise: For us, quality, expertise, and customer satisfaction always come first. Our team consists of qualified and experienced technicians who specialize in Mazak machines as well as other machinery. We place great emphasis on personal support and are happy to assist you at any time, even after your purchase. With us, you are in the best hands – professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All information without guarantee.

Stanje: novo, Drilling capacity in steel (diameter): 30 mm Throat depth: 250 mm Drilling stroke: 130 mm Spindle taper: MT 3 Table size: 380 x 380 mm Column diameter: 98 mm Speed range: 75 – 3,200 rpm Feeds: mm/rev Total power requirement: 1.1 kW Machine weight approx.: 220 kg Dimensions (L x W x H): 0.5 x 0.6 x 2.05 m Gear-driven drill press Tapping device Left / right rotation Tilting work table Work light 2 electronic speed ranges Depth stop Nodpfx Abou Imc Hsbokt Gears run in oil bath Packing dimensions: 2,100 x 400 x 710 mm Weight: 260 kg

Stanje: rabljeno, Leto izdelave: 2005, Cutting diameter: 178 mm Saw blade length: 2265 mm Cutting width: 225 mm Saw blade dimensions: 2265 x 20 x 0.9 mm Blade speed: 30 / 60 m/min Cutting capacity at 90 degrees (round): 178 mm Cutting capacity at 90 degrees (flat): 225 x 110 mm Cutting capacity at 45 degrees (round): 140 mm Cutting capacity at 60 degrees (round): 85 mm Total connected load: 0.75 kW Machine weight: approx. 165 kg Nkodpfx Aorzwwrsbbet Space requirement: approx. 1100 x 700 x 1650 mm Equipment: - Coolant system - Bandsaw blades

Leto izdelave: 2021, Stanje: novo, We are offering a workshop crane for sale. The crane is new and unused. Workshop Crane Premium 2051510WKG10 Nkjdpfxehygn Ij Abbot Design: splayed base Maximum load capacity in position A1: 1,000 kg Lift per pump stroke with/without load: 6 / 20 mm Weight: 130 kg

Stanje: novo, Cutting range at 90 degrees: round 130 mm Cutting range at 90 degrees: square 127 x 127 mm Saw blade dimensions: 1140 x 13 x 0.65 mm Band speed max.: 144 m/min Total power requirement: 1.1 kW Machine weight approx. 15 kg Dimensions (L x W x H): 500 x 300 x 400 mm Portable and detachable metal bandsaw Nsdpoupw N Esfx Abbjkt Features: Powerful 1100-watt motor. Includes 2 saw blades, work table, and integrated LED lighting. Equipped with an adjustable variable handle. Lightweight and easy to handle. Suitable for universal applications in the workshop, on construction sites, or for private use.