Hladilništvo/so/osvežilne storitve

Renault Master 170 Kühlkasten 220V Standkühlung

Stanje: potreben popravila (rabljeno), Leto izdelave: 1999, Funkcionalnost: nefunkcionalno, Machines for restoration Hjdpfxolxqk Rj Adkjni

Stanje: zelo dobro (rabljeno), Storti RM 500 Edger - Made in Italy - Year of manufacture: 1993 - Electrically adjustable sawblade spacing TECHNICAL SPECIFICATIONS: - Maximum cutting width: 435 mm - Maximum cutting height: 170 mm - Motor power: 2 x 22 kW - Maximum width of workpiece: 600 mm - Minimum workpiece length: 800 mm - Maximum blade diameter: 600 mm - Arbor diameter: 40 mm - Two upper feed rollers - One upper pressure roller - Roller drive motor power: 2 x 1.1 kW - Rollers with automatic pressure engagement - Seven lower toothed feed rollers - Electric adjustment of sawblades Hjdpfjk Talpex Adksni - Two lasers - Feed speed: 25 and 50 m/min - Infeed table: 2950 mm - Outfeed table: 3000 mm - Drive rollers diameter: 100 mm - Feed roller motor power: 2 x 1.5 kW Transport dimensions: 500 x 240 x 180 cm Weight: 3,500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Low-usage envelope inserting machine with the following configurations: - 2 feeder stations for unfolded documents with high capacity (325 sheets) - 1 feeder station for enclosures with high capacity (300 enclosures) - 1 feeder station for envelopes (DIN long, C6/5, C5, and other formats) - Daily mail function for up to 5 sheets - Capable of processing extra-long documents - Paper length: 127–406 mm - Paper width: 127–229 mm - Envelope formats: DIN long, C6/5, C5, i.e., 88x220 to 164x242 mm - "Flip-flop function": Automatic switching when a feeder tray is empty - Automatic double-sheet and misfeed detection - Automatic adjustment of fold lengths (no opening/adjustment required) - Automatic height adjustment of the address field Hsdpoiyx Ixjfx Adksni - 4 fold types: single, letter (C-fold), Z-fold, double parallel fold - 20 programmable job memories - Large display with graphical and text indicators - Up to 8 sheets/envelope - Up to 3,500 cycles/hour - Counter reading: 249,103 cycles

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) Hnedpfxegwbbqj Adkoi No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness with rolls (min/max) mm: 0.3 / 3 Edge thickness with strip veneer (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Control / software: ICOS Open Feed speed (m/min): 10 - 50, No power transmission bar (master & slave systems) Retractable reference pins, distance (mm): 1080 FORMAT PROCESSING (per side): - Pre-milling cutter 75.186 (1 x kW 4.4) - Chipper (2 x kW 8) - Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): - Gluing unit (hot melt glue) 283.1513 04.1570 + 283.205 - Edge pressure zone – edge magazine for rolls (compartment No. 6) Hjdpfx Aod Nt Rqedksni - End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) - Milling unit 08.055 (2 x kW 1) 0° - 30° - Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servo motor - Profile scraper unit 08.519 - Flat scraper unit 08.521 - Sprayer unit (for polishing agent) - Buffing unit 08.617-4 (4 x kW 0.18) - Universal milling unit for grooving/rabbetting and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Stanje: delavnici obnovljeno (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE - 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transfer beam (master & slave systems) Safety and noise protection cabin FORMATTING UNIT (for each side): Spraying unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + premelter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Scraper unit 08.517 Hnedpfx Aodh Tfgodkoi Sprayer unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Stanje: zelo dobro (rabljeno), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in line with other machines Control: Power Control Software: WoodWop (TOPDRILL BST 500) Transport belts (qty): 2 (feed speed adjustable) Hodpfx Adjh Ryhnsksni Horizontal drilling supports (qty): 2 Drilling units per horizontal support (qty): 2 Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (qty): 6 Drilling units per lower vertical support (qty): 2 Spindles per drilling unit of lower supports (qty): various Upper vertical drilling supports (qty): 2 Drilling units per upper vertical support (qty): 2 Spindles per drilling unit of upper supports (qty): 2 Upper vertical workpiece clamps (qty): 6 Chip conveyor belt Digital display of positioning data (axis) Total connected load (kW): 26

Stanje: zelo dobro (rabljeno), SINGLE-SIDED DE-STACKING STATION - Upper crossbeam horizontally movable by 180° - Support table with vacuum clamps - Internal lifting platform with motorized sheet metal roller conveyor - Front safety guard, movable - Separate control cabinet and operator panel - External roller conveyor for stack of plates from destacking - External powered roller conveyor from destacking, also with belt drive for 90° transfer of plates - Working capacity (cycles / min): 12-15 - Plate thickness (min/max) mm: 10 - 40 - Min. plate dimensions mm: 250 x 320 Hsdsd Tyvxspfx Adkeni - Max. plate dimensions mm: 1200 x 3000 - Total connected load kW: 11

Stanje: dober (rabljeno), Your contacts in our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering you a used pallet racking beam from the manufacturer Redirack for sale. Technical data for the pallet racking beam: Racking system: Redirack Scope of delivery includes: 01x pallet racking beam, used Colour: orange Box profile: 160 x 50 mm Clear span: 3,610 mm Max. load per pair of beams: 3,500 kg, with evenly distributed load 02x safety pins, used Design: fully galvanized For securing the longitudinal beams against accidental lifting Our range of services: (Prices on request) Assembly and installation Please observe our general assembly conditions Hjdpfxodyqg Es Adkeni Racking inspection Inspection according to DIN EN 15635, carried out according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (unloading not included)

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in a production line) Edgebanding material (edges) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/software: SINITRA Feed speed (adjustable) m/min: 10 - 40 (INVERTER C.N.) Safety and noise protection enclosure Hedpfx Aohvahhsdkeni Side adjustment of aggregate carriers: manual Cam pitch (mm): 500 FORMAT PROCESSING (for each side): Protection milling cutter (pre-milling) AS 10 (5.8 kW) 2 x Hogging units DT 10 (5.8 + 5.8 kW) Spraying unit (for liquid non-stick agent) EDGE BANDING SECTION (for each side): Gluing unit (hot-melt glue + pre-melter) SP30 (High Melt + Edge Control EC 40) Edge pressure zone (CNC controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-S (0.65 kW x 2) 28m/min, 0 - 25°. Pneumatic Multi-profile milling unit (CNC controlled) RF 40 (1 kW x 2) 0 - 25° Multi-function unit (radius and contour copying/trimming) AR 80 (0.65 kW x 2) 25m/min ROTAX motors with automatic tool changer 2 Universal milling units for grooving/rebating and profiling FB 30 (5 kW x 2) 0 - 90° Multi-profile scraping unit (CNC controlled) RBK - 503 (2 positions) Flat scraper unit RC 20 Spraying unit (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2)