Varilni aparat MIG-MAG v plinski zaščiti

REHM SYNERGIC Pro 2/500-4

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2018, obratovalne ure: 6.070 h, Jenz BA 965 DL Titan - Year of manufacture: 2018 - Operating hours: 6,070 - Engine: Mercedes MTU, 630 HP Ncedpsxmvn Isfx Abbsl - AdBlue - Remote control - Hydraulic drive (self-propelled) - Weight: 25,000 kg The machine has been workshop overhauled and is immediately available.

Leto izdelave: 2013, Stanje: pripravljen za uporabo (rabljen), The following units are available: one Rehm Invertig Pro 350 AC/DC and one Rehm Invertig Pro 450 DC, both used and in good condition. 1) Invertig Pro 350 AC/DC Standards: IEC 60 974-1, IEC 60 974-2 Welding current range (TIG): 3–350A Output voltage U₂ (at maximum current): approx. 24V Open circuit voltage U₀: approx. 91V Duty cycle (DC): 100% (for TIG at 350A) Mains voltage/input: 3-phase, 400V, 50Hz Protection class: IP 23S, safety class S Adjustment range: 3–350A (TIG) for AC/DC version Duty cycle: 100% at 40°C, 350A (TIG), 100% DC Input fuse: 32A at 3x400V for the 350 AC/DC version Dimensions: length 520mm, width 360mm, height 460mm Weight: 29.5kg (AC/DC version) 2) Invertig Pro 450 DC Standard: IEC 60 974-1 Welding current range (TIG): 3–450A Output voltage U₂ at maximum current: approx. 28V Open circuit voltage U₀: approx. 91V Ncedpfxoxddamo Abbol Duty cycle (DC): 100% at 450A (TIG); for electrode welding, duty cycle is lower (approx. 60%) Mains/input: 3x400V, 50Hz Protection class: IP 23S Duty cycle at 100% DC, 450A (TIG) at 40°C Electrode welding current: approx. 360A at 100% DC (electrode) for the 450 DC version Power/input fuse: 32A at 400V (three-phase) for the 450 versions Dimensions: length 520mm, width 360mm, height 460mm Weight: approx. 28kg On-site inspection is possible.

Stanje: rabljeno, Technical Details: Welding current: 500 A Ncsdpfovz Abhsx Abbsl Machine weight approx.: 128 kg Dimensions (L x W x H): 1.2 x 0.8 x 1.2 m Control: Welding current display with 2/4-stroke switch, pulse function, stepless adjustment Cooling system: Water-cooled with antifreeze protection Shielding gas: Solenoid valve without pressure regulator Welding torch assembly with 4.0 m hose package Torch head: Gas-cooled Earth clamp with 4.7 m earth cable Wire feed: 4-roller drive for wire Ø 1.0/1.2 mm

Stanje: dober (rabljeno), Leto izdelave: 1972, LZ-strojni stružnica Izdelovalec: HEIDENREICH & HERBECK Tip: 21RO l. 1972 s hitromenjalnim držalom Parat (10 kosov), dokumentacija za stroj, natančni kazalnik navojev, koničast hrot, 250 mm Forkardt vpenjalno glavo. Nodpfst Ipi Ijx Abbecl Premer struženja nad posteljo: 430 mm Premer struženja na suportu: 255 mm Dolžina med konicama: 1000 mm Dolžina struženja: 750 mm Hitrosti vretena: 19–2000 min⁻¹, motor 5,5 kW Premer luknje vretena: 56 mm Ostali podatki v tehničnem listu Potrebni prostor: dolžina 2900 mm, širina 1100 mm, višina 1300 mm, teža cca 1750 kg. Strojna dokumentacija priložena. Vgrajena hladilna naprava, zadnja stena za odvajanje odrezkov. Stroj je v dobrem stanju, možen preizkus pod tokom.

Stanje: dober (rabljeno), Leto izdelave: 2013, številka stroja/vozila: 0370250754, Offer 23374 Hydraulic Welding Positioner and Tilting Table – Three Axes – Welding Manipulator Technical Specifications: Ncodpfx Aev Rbivjbbel - Maximum load capacity: 3,000 kg - Faceplate diameter: 1,000 mm - Minimum table height in horizontal position: approx. 1,070 mm - Maximum table height in horizontal position: approx. 1,970 mm - Faceplate motorized, rotatable and tiltable - Rotary motion electrically adjustable, stepless - Clockwise and counterclockwise rotation - Welding current transmission: approx. 700 A - Drive: 400 V - Connected load: 4.0 kW - Handheld remote control for rotational direction, tilting and inclination - Required floor space: approx. W 2,250 x H 1,070 x D 1,350 mm - Weight: approx. 2,000 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1990,

Stanje: dober (rabljeno), Leto izdelave: 1995, številka stroja/vozila: 0523813, Offer 22728 Technical Data: - Welding current: max 335 A at 35% duty cycle max 260 A at 60% duty cycle max 200 A at 100% duty cycle - Welding current adjustable in 36 fine steps from 40 A to 335 A Nodpfx Aberm Rpvsbecl - 2-roll wire feed - Infinitely variable wire feed speed - 2-stroke / 4-stroke selector - Spot welding and interval welding functions - Air-cooled torch package, length: 4 metres - Ground cable - Pressure regulator - Power supply: 400 V - Dimensions (approx.): W 550 x H 1000 x D 1000 mm - Weight (approx.): 150 kg

Leto izdelave: 2009, Stanje: dober (rabljeno), številka stroja/vozila: 4495678, Offer 18336 Portable TIG-DC welding machine on transport trolley Ncjdpfehq T N Djx Abbsl Technical Data: - TIG – DC + electrode welding - Welding current continuously adjustable for TIG welding from 5 A - 10.0 V up to 150 A - 22 V 35% duty cycle 100 A 100% duty cycle - Power supply 220 V / 50 Hz 15 A - Equipped with: - 2-stroke / 4-stroke function - HF (high-frequency) ignition - Adjustable welding current run-down - Pre-gas and post-gas flow control - 4.5 m torch package, lightweight version - Ground cable - Pressure regulator - Space requirement: approx. W 200 x H 300 x D 500 mm - Weight: approx. 10 kg - Transport trolley with gas bottle holder: W 550 x H 900 x D 560 mm - Weight transport trolley: approx. 10 kg

Stanje: rabljeno, Leto izdelave: 2003, stiskalna sila: 260 t, Hydraulic Press Brake Make: HACO Model: ERMS 60-260 Year of manufacture: 2003 Technical Specifications Manufacturer: HACO Model: ERMS 60-260 Year: 2003 Pressing force: 260 t Bending length: 6000 mm Dimensions (L x W x H): approx. 7.0 x 2.0 x 3.70 m Weight: approx. 31 t Ncodpewkttrjfx Abbol Equipment • Digital control ATS 560 • Fiessler safety light curtain (front) • Centrally adjustable crowning • Amada tooling system • Controlled axes: Y1, Y2, X • R-axis manual • 1 set upper tool • 1 set lower tool All information is provided without guarantee. A demonstration is possible at any time in the showroom.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, nosilnost: 5.000 kg, dvižna višina: 25.000 mm, vrsta goriva: dizel, tip droga: simpleks, dolžina vilic: 1.200 mm, vrsta pogona: Diesel, Rotating Telescopic Handler Mast Type: Quattro Condition: New Machine Technical Condition: New Front Tyre Type: Pneumatic Front Tyre Condition: 80 - 100% Ncjdpsw Eqdkefx Abbjl Rear Tyre Type: Pneumatic Rear Tyre Condition: 80 - 100% Description: The vehicle is UVV-inspected. A&M pallet fork carriage set including 1200mm pallet forks, 1500mm pallet fork carriage plate, and 5t lifting hook. 3rd control valve, 4th control valve, heater, road approval according to German regulations (StVZO), full cab, CE certificate, 3rd control valve 4th control valve heater road approval full cab CE certificate TÜV/Dekra approval 20 km/h 45% self-locking differential to the second axle 2 front adjustable LED lights on the cab 2 rear adjustable LED lights on the cab set of additional platforms for stabilising supports 455/70 Michelin wheel set standard fork carriage plate remote control with 2 joysticks automatic wheel alignment kit for upper carriage rotation by 180 degrees wired reversing camera 3-sided work platform 120 x 240 cm, 5.0t winch to be mounted on the fork carriage. Including work platform and winch.