Drobilnik z dvema gredema

R-Techniq ZEIGE 300

Stanje: generalkompletno obnovljen (rabljeno), Herma polavtomatski etiketirni stroj za ovijanje, Allen vroči žig kodirnik, s priloženimi rezervnimi deli in navodili za uporabo, vse nameščeno na nerjavni mizi, 1-fazni priklop. Dedpfx Aeib Dcronuecn

Stanje: skoraj kot novo (rabljeno), Rotary vane vacuum pump in oil bath. Available in stock. Pump fully overhauled. Comes with warranty. Nominal flow rate: 300 m³/h Ultimate vacuum: 0.1 mbar abs. Dcjdpfx Ansftzzgsusn For any questions, please contact us.

Stanje: novo, Leto izdelave: 2026, Kroglični mlin je izjemno primeren za drobljenje mineralnih surovin. Dedopahwvjpfx Anujcn

Leto izdelave: 2019, stanje: kot nova (razstavni stroj), Aluminium flat belt conveyor including 4 suspension points Dimensions: 6000 + 520 x 105mm Belt width: 400mm PVC conveyor belt including cleats and wave edge * Optionally available with a magnetic tail pulley at the end of the conveyor belt. * Optionally available with subframe. Dedpfjd Ra Ttox Anuecn * Custom-made versions in all configurations possible.

Leto izdelave: 2019, stanje: novo, Recirculating Curing Oven Gas Furnace CGN Oven Powder Coating Oven NEW SGS-800/O Gema Optiflex Width: 2500 mm / Height: 2500 mm / Depth: 12500 mm Directly from the manufacturer. For more information, see Romer-Germany Dcjdpecw Tzxofx Anuen

Stanje: rabljeno, Leto izdelave 2003 2,2 kW 3,0 KM Dsdpfx Answ Upn Eeuecn vključno z dokumentacijo, COC

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, GIC TAGINNOV SPEED ETIQ Baujahr: 2019 _____ Produktbeschreibung: Eine GIC RFID-Verarbeitungsmaschine, bei der das RFID-Label exakt unterhalb des gewünschten Etiketts aufgebracht wird. Maschinenspezifikationen und Ausstattung:  Geschwindigkeit: 3 bis 50 m/min  Gewicht: 70 bis 16 g Dcodpev Iqg Sofx Anujn  Etikettenbreite: max. 350 mm  RFID: wet (nass)  RFID-Breite: max. 100 mm _____ Zubehör inklusive:  Handbücher  Schlüssel  usw. _____ Technischer und optischer Zustand: • Technisch: 9/10 (überprüft und in einwandfreiem Betriebszustand) • Optisch: 9/10 (gereinigt und sofort einsatzbereit für den Endanwender) _____

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. Dedpfx Anjh Ek Daeuecn The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Leto izdelave: 1988, stanje: zelo dobro (rabljeno), številka stroja/vozila: 3284, • Protective screens around the machine. (min.) Material thickness: 0.65 mm (max.) Material thickness: 2 mm Technical specifications: Dsdpshbu E Hefx Anuecn Maximum/minimum film width: 450/350 mm Maximum forming area: 430 x 160 mm Maximum draw depth negative/positive: 6/20 mm (22 mm negative upon request) Maximum top heating: 10.15 kW Motor drives: 3.0 kW Total connected load at 100% duty cycle: 12.7 kW Operating air pressure: 6 bar Maximum air consumption (depending on production): 1250 l/min Maximum water throughput: 1.0 m³/h COMPACT AND ROBUST – designed for high continuous output with easy operation. Ergonomic design (e.g. removal height 1300 mm). QUICKLY CONVERTIBLE – from 30° to 90° film feed, allowing for maximum material utilization for both rectangular and round lids (easy heater change). PRECISION – The precise forming table guidance via guide columns with ball bushings. The safe, reliable guarantee of precision. OPTIMAL CUTTING ACCURACY AT HIGH ENDURANCE LEVELS Cam-controlled functional sequence guarantees the highest repeat accuracy.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Steinert NES 125 220 E 5009 na prodaj Proizvajalec: Steinert Tip: NES 125 220 E 5009 Širina traku: 1.500 mm (novi trak) Z novo krmilno enoto. Dodpfx Aexb S Exjnuscn Prenovljeno, uravnoteženo, peskano in prebarvano.