Abraziv 2 vrečki

Rösler RS 40/40 50 kg

Stanje: novo, Leto izdelave: 2026, The ERBA Turbo 60 is a centrifugal finishing machine designed for deburring, smoothing, and polishing of small to medium-sized workpieces. The unit features a digital process timer, digital speed display, and a dosing pump (wet version). The plate speed can be adjusted via frequency inverter. The Turbo 60 is available in both dry and wet configurations. It can be seamlessly linked with the ERBA YE-60 separation section as shown in the images. Technical specifications: - Gross volume: 60 liters - Drive power: 3.0 kW - Plate speed: 75 to 300 rpm Lhedpfx Abjn Ut Ilsbjb - Optional equipment: tilting motor, sound insulating cover, or separation box All prices are net, plus the currently applicable statutory VAT and shipping costs. The images may depict the system including optional accessories, which are available separately and may incur additional charges. If you are interested, we look forward to your inquiry. We will be happy to advise you, without obligation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer serves solely as an online presentation of our goods. Contract negotiations are conducted via telecommunication (email, phone, messaging portal). Our initial offer is non-binding and will include information on our general terms and conditions, imprint, and right of withdrawal, before any purchase/contract is concluded.

Stanje: novo, Load capacity 15,000 kg Length 10,000 mm Width 2,450 mm Height 625 mm Rear axle: steerable Front axle: steerable Tyre dimensions: 425 x 260 mm Machine weight approx. 2.9 t Required space approx. 11.7 x 2.5 x 0.625 m Lhodpefrzvljfx Abbob Heavy-duty trailer featuring: - Double turntable steering - Small turning radius - Tip-over protection thanks to steering angle limiter - Robust design, low maintenance - Interchangeable drawbar, length 1,320 mm - Impregnated wooden platform - Standard paint finish varies. On request, can be supplied in your desired RAL colour. Need different load capacities or dimensions? Please contact us.

Stanje: rabljeno, Circular Trough Vibratory Finishing Machine WALTHER TROWAL Type CLS-230 Lsdpfxjfqpxie Abbjhb Item No. 05.833/00 Year of Manufacture: 1969 Trough Diameter: 1,100 mm Total Trough Height (external): approx. 650 mm Processing Tank / Gross Volume: max. 230 liters Usable Volume: approx. 115 liters Rotational Speed: 1,100 to 1,800 rpm, infinitely variable Motor Power: 7.5 kW Mains Connection: 400 Volt, 50 Hz - Operating time can be set manually or via timer - Infinitely variable motor speed via variator gearbox - Manually adjustable eccentric imbalance weights - Tank with polyurethane lining (lining partially damaged or worn) - Soundproofed cover - Manual separation flap - Integrated screen separation device after the separation flap - Liquid connection - Material discharge opening: 180 x 150 mm - Control cabinet for wall mounting - Baffle cover with perforated screen Space requirement with base (L x W x H): 1,800 x 1,750 x 1,700 mm Net weight: approx. 1,800 kg Good condition Function description: Workpieces and media are set in motion by the induced vibration and are tumbled very gently. The continuous relative movement between the workpieces and the media results in the deburring and surface finishing of the workpieces.

Stanje: novo, Leto izdelave: 2026, The EVP-RA 350 vibratory finishing machine by ERBA features an inclined process channel bottom with integrated separation. The machine is equipped with an easily replaceable screening unit and is distinguished by high operational efficiency thanks to an integrated drop zone. Unloading and separation are carried out via the integrated discharge flap (manual/pneumatic). Upon request, the machine can be fitted with a reinforced spring assembly and a more powerful motor for higher loads. The motor speed can be infinitely adjusted with a frequency converter (optional). Thanks to its side discharge outlet, the EVP-RA 350 can be linked with other machines. The system can be optionally equipped with a fully automatic PLC control. Lhedpfx Asn Ut Ursbbeb ERBA vibratory finishing systems are renowned for their durability and longevity, owed in part to the hot-cast polyurethane lining of the process channel. Technical specifications: - Gross volume: 385 liters - Channel width: 340 mm - Imbalance motor output: 2.2 kW - Speed: 1,400 rpm - Internal diameter of process channel: 1,200 mm All prices are net, plus the applicable statutory VAT and shipping costs. The images may show the machine with accessories, which are optionally available at additional cost. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). The offer is intended solely as an online presentation of our goods. Contract negotiations take place via telecommunications (email, telephone, messaging portal). In the first instance, we will provide you with a non-binding offer, which includes our general terms and conditions with legal notice and information on the right of withdrawal before any purchase/contract conclusion.

Stanje: rabljeno, Leto izdelave: 1998, Polnilna prostornina 620 litrov Zunanji premer posode 1695 mm Dolžina posode (raztegnjena) 3800 mm Širina delovne kadi 430 mm Število vrtljajev 900 - 1485 obr/min Obratovalna napetost 400 V Lhedpfxew Hnr Is Abbsb Skupna priključna moč 7,5 kW Teža stroja pribl. 1600 kg Potreben prostor pribl. 1,80 x 1,70 x 1,30 m - Tovarniška št.: 18585/98-03 - z brezstopenjsko nastavitvijo vrtljajev (frekvenčni pretvornik) - s pnevmatsko ločevalno loputo

Leto izdelave: 2015, Stanje: rabljeno, Dimensions (L x W x H): 700 x 655 x 1,400 mm Filter surface: / m² Number of filter bags: 1 pc. Number of chip collection bags: 1 pc. Lodpfjgr Rkxox Abbehb Weight: 140 kg with control box and start-stop sensor

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Blast container for blasting with glass beads, ceramic, corundum, chilled iron grit, garnet sand, etc. The blast container features a fully covered screw conveyor floor and a genuine abrasive recycling system. No more sweeping, vacuuming, or shoveling of abrasive in the blast chamber while processing your workpieces, thanks to our recirculation system. Abrasive cleaner windsifter with four-way adjustment: airflow volume, flow speed, extraction proximity to the abrasive, and abrasive bed height setting. Electric vibrating screen for continuous coarse separation. Bucket elevator with trapezoidal thread spindle for belt tensioning and speed monitoring. Container lining made of 4mm, 70 Shore fabric-reinforced rubber guarantees a service life of up to 30 years when used correctly. The container can be fully opened from the side for simple forklift loading. The container can be upgraded with crane roof hatch, floor reinforcement, or lateral blast chamber extension. For stainless steel blasting, the container can be equipped with an actual magnetic drawer or drum-type magnetic separator, as well as a stainless steel grating. Filter unit with easy-maintenance access doors, big bag dust collection, secondary filter H13/14, and silencer. Blast pot with pressure regulator and water separator. The container is characterized by its reliability and easy maintenance. All system components are easily accessible at the rear of the container. Only 4 ball bearings on the screw conveyor floor and 4 ball bearings on the bucket elevator. Lhjdpfeuwlzysx Abbsb Special warranty of 5 years included on all essential components of the blasting system. Safety features: door/gate limit switches, dead-man control, emergency lighting, blast chamber viewing window, emergency stop inside the blast chamber and on the control cabinet, quick-release pressurized vessel vent.

Stanje: zelo dobro (rabljeno), Several 150 m³ steel storage tanks (firefighting water tanks), installed underground Volume: 150,000 liters Diameter: approx. 3,000 mm Length: approx. 22,500 mm Weight: approx. 28,000 kg The tanks are retrofitted as underground firefighting water tanks according to DIN 14230: Each tank is equipped with a firefighting water suction connection according to DIN 14244, featuring a mounted fire brigade coupling/fixed coupling A in accordance with DIN 14319, version Form B, without a dip tube. Lhsdpfx Aofnh Tgjbbjb Additionally, the tank features a vent flange connection (NW/DN 100) with cap, with an overall length of approx. 1,300 mm, suitable for 800 mm earth cover and 500 mm above ground level. - The tanks are emptied, cleaned, and factory-coated on the outside with bitumen by us. - Upon request, we can provide the tank with a full internal bitumen-based corrosion-resistant coating or epoxy resin internal coating. Cost-effective delivery is possible with our own truck. Simply let us know the delivery location and you will promptly receive the exact shipping costs. Inspection is possible at any time by prior appointment. If you require further information, please call us or send an e-mail to b.barth (at) barth-tank.de

Stanje: dober (rabljeno), The following listed driven tools VDI 50 are suitable for a SAUTER tool turret and are in good condition and fully functional, having been used on a GILDEMEISTER CTX 600 CNC lathe. 6 x driven tools, straight design, brands NACKE + WTO, VDI 50 for SAUTER tool turret: Item no.: XVI 24275 1 drilling/milling unit, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.1, collet chuck Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €545.00 plus statutory VAT. Item no.: XVI 24277 1 drilling/milling unit, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.3, collet chuck Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €400.00 plus statutory VAT. Item no.: XVI 2687 1 drilling/milling unit, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item no.: XVI 2687 1 drilling/milling unit, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item no.: XVI 2687 1 drilling/milling unit, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item no.: XVI 2687 1 drilling/milling unit, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Lhodpfebql S Hjx Abbeb Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, vrsta hlajenja: voda, FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 Power Source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius Wire Feed Case VR 4000 ➤ Fronius Intermediate Hose Package Standard from 1.5m ➤ Fronius Trolley ➤ Fronius Hose Package ➤ Ground Cable 3-4m Lsdpfowbh Ifex Abbjhb ➤ Pressure Regulator With this unit, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It is equipped with touch wire programs and is also suitable for MIG brazing (CuSi), which is frequently used in sheet metal working. Additional options and applications: This TPS series can easily be connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and import custom characteristics to further extend the TPS unit's functions. ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection possible in Vienna 1230, Austria! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the unit? For your information: we purchase as-new used devices, disassemble, thoroughly inspect, replace any necessary wear parts, and only after a successful test weld do we release them for sale. "All" units are clean, with no burn marks on the displays or numerous burn holes or dents over the machine! You are purchasing an item from us that is presentable and does not look completely worn out! ►►►Do we receive an invoice when buying from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment methods are available? Prepayment or cash on personal collection ►►►Is insured shipping possible? Yes, we are happy to ship the purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately cannot offer a warranty. Of course, the devices can be tested and paid in cash on site. ►►►Why buy from us? We are specialists in this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these systems inside out and do not sell anything we are not familiar with.