Delavnica za brizganje in stiskanje

R+S Technik

Stanje: rabljeno, številka stroja/vozila: 12625, Rotor diameter: 800 mm Rotor width: 1500 mm 6-knife rotor Fodpfx Aek Rfvksfloft 4 rows of stator knives Infeed opening approx. 820 x 1500 mm Drive motor: 160 kW

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036940, vpenjalna sila: 1.600 kN, premer vijaka: 50 mm, delovna prostornina: 393 cm³, tlak vbrizgavanja: 1,892 letvica, injekcijska masa: 358 g, minimalna višina orodja: 200 mm, izmetalna sila: 33.000 N, hod izmetalca: 100 mm, odmični hod: 950 mm, vgradna višina: 500 mm, skupna dolžina: 5.650 mm, skupna širina: 1.820 mm, skupna višina: 1.950 mm, skupna masa: 9.700 kg, ogrevalna zmogljivost: 15,5 kW (21,07 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 570 mm, teža orodja: 600.000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The entry-level injection moulding machine, precisionMolding, is the perfect solution for fully electric injection moulding, enabling you to respond quickly and innovatively to changing market demands. It combines high performance, easy operation, and short delivery times. The machine is suitable for a wide range of applications, such as the packaging industry, electronics and electrical industry, medical technology, and the automotive sector. Your benefits: – Optimized price-performance ratio for a broad range of applications – High energy efficiency thanks to a fully electric machine concept – Reliable and efficient delivery times due to a base machine concept with a wide spectrum of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine No.: 61036683, new, year 2013) CONTROL SYSTEM - MC P1 with 15" TFT colour display with multi-touch functions CLAMPING UNIT - Clamping force: 1600 kN - Maximum mould opening force: 120 kN - Daylight (H x V): 570 x 520 mm - Mounting platen (H x V): 770 x 720 mm - Mould installation height min. – max.: 200 – 500 mm - Maximum opening width: 950 mm - Maximum mould opening stroke: 450 mm - Ejector drive: electric - Ejector stroke: 100 mm - Ejector force, forward/reverse: 33 / 33 kN - Ejector speed, forward/reverse: 300 / 300 mm/s - Maximum mould weight: 1200 kg INJECTION UNIT - Screw diameter / type: 50 mm / standard - Effective L/D ratio: 20.2 - Injection pressure: 1,892 bar - Stroke volume: 393 cm³ - Shot weight at max. stroke for PS: 358 g - Injection speed: 200 mm/s - Injection flow rate: 393 cm³/s - Screw drive / rotation speed: 267 rpm - Plasticizing throughput (standard screw): 36.5 g/s - Nozzle contact force: 42 kN ELECTRICAL PARAMETERS - Connected load: 31.2 kW - Installed heating capacity: 15.5 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral WEIGHT AND DIMENSIONS - Net weight (incl. control cabinet): 9.7 t - Length x width x height: 5.65 x 1.82 x 1.95 m ADDITIONAL FEATURES - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - Air valve, single (BWAP) - Pneumatic control for hot runner shut-off, single - Electrical interface for pneumatic cascade, 4-fold - Euromap interface for handling: E18 + E67 - Euromap interface (central computer): E67, E77 - Water manifold, 4-fold - Electrical pre-installation for hydraulic auxiliary unit - Automatic central lubrication - Adaptive Process Control (APC) - Injection compression moulding circuit - Graphic analysis package - Swivel device for injection unit Ffjdpfeugfw Dsx Aflot The machine is located at our facility in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your enquiry.

Stanje: zelo dobro (rabljeno), Manufacturer: Kobol Model: CSH-1209H AL 1C Ffodpsir E Drofx Aflet Power output: 700 kW Weight: 2,309 kg Used, in good condition 4 units available

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 23.170 h, vpenjalna sila: 2.500 kN, premer vijaka: 60 mm, tlak vbrizgavanja: 2.005 letvica, injekcijska masa: 618 g, minimalna višina orodja: 330 mm, Injection Moulding Machine Krauss Maffei 250-1400CX with Robot and Gas-Boost (225) Article number: 225 Availability: In stock Year of manufacture: 2016 Brand: KRAUSS MAFFEI Ffedsvtzkfepfx Aflet Technical specifications Shot weight: 618 g Injection rate: 848 cc/s Clamping force: 2,500 kN Screw diameter: 60 mm Injection pressure: 2005 bar Tie bar spacing: 630x630 mm Platen size: 1135x1180 mm Minimum mould height: 330 mm Maximum daylight: 1150 mm Control system: MC6 Language: German Power: 70 kW Operating hours: 23,170 h Weight: 15,000 kg Dimensions: 6.5x2.3x2.3 m Hopper: No Core pull: Yes Euromap interface: Yes Air valve: Yes Heated channels: Yes Gas accumulator: Yes

Stanje: dober (rabljeno), Leto izdelave: 2020, obratovalne ure: 881 h, Funkcionalnost: nepreverjeno, Oprema: Osnovni paket Methor goseničar Gosenično podvozje z 2 hitrostmi vožnje Gosenice podvozja 400 mm, 3-rebraste Dodatni hidravlični priključek 70 l/min 24V električno krmiljenje Velik daljinski upravljalnik, komplet Vzdrževalno prijazen motornik s LED svetilko Fodevnmmzspfx Afloft Zložljivi lijak s potnim senzorjem in samodejnim upravljanjem Hidravlično reverzibilen ventilator Akustično opozorilo ob zagonu Rezervoar za gorivo 300 litrov Barva: RAL 2011 temno oranžna Dodatna oprema: Motor Cat C7.1, 205 kW Zadnji trak 6,9 m Okvir za nadpasni magnet Nadpasni magnet Hitromenjalni sistem valja Hitromenjalni sistem valja Namakanje LED delovna razsvetljava Dodatna električna črpalka za upravljanje pri zaustavljenem motorju Gasilski aparat GN 9 A-3 DIN EN 3

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 32.827 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 230239, vpenjalna sila: 2.000 kN, premer vijaka: 40 mm, delovna prostornina: 201 cm³, tlak vbrizgavanja: 2 letvica, injekcijska masa: 184 g, skupna masa: 11.200 kg, Here we, as a trading company specializing in injection molding machines, offer the following well-maintained used injection molding machine: Of course, we also purchase well-maintained injection molding machines from model year 2010 onwards. We have been wholesalers of used injection molding machines for over 25 years. Important information – Tax advice and benefits for used machinery: From 01.07.2025, used machines are also eligible for a special tax depreciation of 30% per year. In addition to the lower price compared to new machines, you can claim the same depreciation rates as for new equipment. Keyword: Growth Booster (§ 7 para. 2 EStG-E) Arburg 1500T 2000-400 rotary table vertical machine Machine serial no.: 230239 A full list of equipment can be found in the downloadable documents - machine card Controller: Selogica Year of manufacture: 2014 * Total machine cycles: only 1,469,728 * Automatic operating hours: 32,827 h Clamping Unit Distance between platens: 700 mm Clamping force: 200 t/2000 kN Mould installation height: 400 mm Table diameter: 1500 mm Rotating axis: 180° Rotational speed: min. 2.4 s Weight on rotary table: 1,050 kg Ejector force: 45 kN/175 mm ejector stroke Injection Unit Screw diameter: 40 mm Injection volume: 201 ccm Shot weight: 184 g Injection pressure: 2,000 bar Extras - 2-station 180° rotary table, alternating forward/backward, with servo-electric drive and hydraulic locking pin for precise centering at end position; safety separation between clamping and loading areas, height-adjustable on the turntable to match lower mould halves, with provision for media lines and connections for lower mould halves - Rotary table diameter: 1500 mm - Max. clamping force: 2,000 kN - Injection unit according to EUROMAP 400 - Screw diameter: 40 mm - Special ergonomic rotary table model with following features: - Corrosion protection treatment for rotary table (VE 574/90) - 2-circuit water connections - 3 hydraulic connections for needle shut-off system - 3 x core pulls - Per station: 1 core pull and 2 temperature control circuits - 6 x mould temperature control - 12 zones for mould heating circuits - Kistler cavity pressure sensors (2x) - Temperature monitoring for start-up parts Weight: 11,200 kg Power: 22 kW motor – heating power: 9.4 kW, 5 zones – connected load: 100 A The machine is offered after functional testing, fully operational, with commissioning warranty – tested before dismantling. Information about our offered machines and our company: - We only sell machines purchased from active production, stored at our Hanover warehouse - All machines are checked and tested before dismantling - We do NOT sell insolvency lots – we are NOT an intermediary dealing in third-party property Ffjdeuuf Iaopfx Aflot - All machines offered come from successful companies where maintenance and care are a given - All machines offered can be inspected at our warehouse

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 95 kW (129,16 KM), vrsta hlajenja: voda, skupna masa: 729 kg, skupna širina: 930 mm, skupna dolžina: 2.430 mm, skupna višina: 1.070 mm, trajanje garancije: 6 meseci, ogrevalna zmogljivost: 130 kW (176,75 KM), WASSERGEKÜHLTER KÄLTERÜCKKÜHLER/WÄRMEPUMPE DAIKIN EWHQ120G 95/130 kW Kühlleistung: 95 kW – 27 Tonnen (12/7°C – 35°C) Heizleistung: 130 kW – 36,9 Tonnen (40/45°C – 7°C) Baujahr: 2019 Kältekreislauf: 1 Stück Ffsdjvn N Hwopfx Aflot Wärmetauscher: Plattenwärmetauscher Optionen: Wärmepumpenfunktion Kältemitteltyp: R410A Verdichter: 2 Stück Copeland (Scroll) Abmessungen: 2.432 x 0.928 x 1.066 m Gewicht: 729 kg Betriebsstunden: 11.437 / 4.712 h Zustand: Sehr gut

Stanje: novo, Container Filling System / Conveyor System Rotary tower with a horizontally swiveling and longitudinally movable conveyor belt on a stable, galvanized frame, rotatably mounted. Including inclined conveyor belt and elevating conveyor for the automated filling of three large-capacity containers. PLC control system Distributor belt gear motor 2.2 kW / conveyor width 900 mm / axle distance 5500 mm Slewing ring drive 0.6 kW Rotational drive +/- 90° Inclined belt conveyor width 600 mm / axle distance 4000 mm / drive 1.1 kW Elevating conveyor width 600 mm / axle distance 4700 mm / drive 1.1 kW Ffjdpfxob Sp D Rj Aflot Color scheme according to customer requirements Made to order Price and further information upon request

Stanje: dober (rabljeno), Leto izdelave: 2022, obratovalne ure: 600 h, Funkcionalnost: nepreverjeno, Oprema: Osnovni paket Methor na gosenicah brez drobilnega sistema - Gosenicno podvozje z vključenima 2 voznima hitrostma - Veriga podvozja 400 mm, 3-rebri - Dodatni hidravlični priključek 70 l/min - 24-V električno upravljanje - Velik kompletni radijski daljinski upravljalnik - Uporabniku prijazen motornik prostor z LED osvetlitvijo - Zložni lijak s potnim senzorjem in avtomatskim upravljanjem - Hidravlično reverzibilno ventilatorsko kolo - Akustično opozorilo ob zagonu - Barva: RAL 2011 globoko oranžna Posebna oprema: Drobilni sistem velikost L (8 zob) Motor Cat C7.1, 205 kW Ffedpfxevrz Rvo Aflot Zadnji trak 6,9 m Okvir za nadpasovni magnet Nadpasovni magnet Namakalni sistem

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, Hydraulic 400-ton column press suitable for continuous shift operation, with the following basic specifications: Ffodpeg Iihwjfx Afljt a) Closing speed: 100 - 450 mm/sec b) Opening speed: 50 - 250 mm/sec (adjustable via touchscreen) c) Pressing speed: 5 - 60 mm/sec (adjustable via touchscreen) d) Accumulator with approx. 4 nitrogen bottles e) Table size (clamping area): 2700 x 1700 mm (front view, between the columns) f) Total table size: 3400 x 1700 mm g) 28 mm T-slots as per customer specification h) Table, ram, and press head are stress-relieved annealed i) Column diameter: 250 mm j) Ram size: 3400 x 1700 mm (clamping area 2700 x 1700 mm) k) Overall machine dimensions approx. 3900 x 2200 mm (floor area) x 5700 mm height l) Oil temperature monitoring (adjustable via touchscreen) m) Automatic lubrication (adjustable via touchscreen) n) Free positioning of the ram (adjustable via touchscreen) o) KEYENCE light curtains 14 mm on front and rear sides p) Recirculating oil cooling (adjustable via touchscreen) q) Pressure holding valve 0 to 600 sec. (adjustable via touchscreen) r) Table plate size 3400 x 1700 mm, precision-milled s) Side-monitored doors, 1200 mm high, 1000 mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m away from the press u) Pressure adjustment from 50 to to 400 to (adjustable via touchscreen) v) Stroke limitation selectable by pressure or position w) Programming mode, setup mode, single stroke + continuous stroke (selectable via rotary switch) x) Swiveling operator panel with 15-inch touchscreen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed (SIEMENS S7 1500) aa) Machine body primed and painted bb) Installation, commissioning, and training available at extra cost The hydraulics of the presses we offer are completely assembled using components from BOSCH-REXROTH/Parker/HAWE. Only components (SIEMENS) that are readily available in Germany are used in the control cabinet. All safety equipment, except the light curtains, is supplied by SICK. The control system is supplied by SIEMENS (S7 1500) including the 15-inch touchscreen monitor. The SIEMENS remote maintenance unit SECOME-Ethernet is included in the scope of delivery. SPECIAL FEATURE: Our design, featuring two press cylinders and the accumulator, allows full performance with a main motor of just 90 kW. Please refer to section 1.3 for technical details. Technical Data Design Type of press: Column press Thermally neutral: 80 – 120°C Number of operator sides: 2 Forces Press force max.: 4,000 kN Free opening force max.: 600 kN Pressure build-up time (closed tool, steel on steel): max. 2 sec. Dimensions – intended minimum tool height: 600 mm Max. opening width: 1600 mm Stroke and min. opening: 1000/600 mm Table height above floor: 820 mm Height above floor (overall height): approx. 5700 mm Hall height min.: 7000 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection (at max. closing force with 70% occupancy): ≤ 0.17 mm/m Weight Total weight of the press without operating materials: approx. 52 tons Speeds (see attached cycle diagram) Rapid closing: 100 - 450 mm/s Pressing speed at F max.: