Vertikalni obdelovalni center

QUASER HX 505 AP

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 700 mm, merilno območje osi Y: 1.000 mm, merilno območje os Z: 600 mm, Used Machine – Mitutoyo Crysta Apex C7106 Here I am offering a very well-maintained 3D coordinate measuring machine (CMM) from Mitutoyo. The machine was manufactured in 2004 and was exclusively operated in a climate-controlled measuring room. This is a top-of-the-line, fully equipped machine, so you can start working with it immediately! We can, of course, organize transport, installation, commissioning, and calibration (factory or DAkkS certification) for you, so you do not have to worry about any of the logistics. Machine configuration can be tailored to your requirements upon request. Typically, these machines are equipped with a rotary and swivel head, including the corresponding probe and modules. A probe rack can also be offered if not already included. We can also provide a software upgrade if required. Bsdpfxjvpdhxo Ag Ejdd For specifications, please refer to the PDF or images. Leasing available on request. (All prices are net plus VAT.)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, FAMUP MCP 45 CNC Machining Centre TECHNICAL DATA Axes Number of axes: 3 X-axis: 450 mm Y-axis: 300 mm Z-axis: 400 mm Feed Rates Working feed X, Y, Z: 10,000 mm/min Rapid traverse X, Y, Z: 30,000 mm/min Working thrust X, Y: 2,000 N Working thrust Z: 3,300 N Pallet Dimensions: 400 x 300 mm Number of T-slots: 2 T-slot width: 14 mm T-slot spacing: 80 mm Max. table load: 100 kg Changeover time: 9 sec. Spindle Spindle motor power: 5 kW Speed: 10,000 rpm Tool Changer Magazine capacity: 16 Max. tool diameter: 63 mm Max. tool length: 150 mm Max. tool weight: 4 kg Tool change time: 1.7 sec Bodpfx Ajq U Rm Heg Esdd Weight: Approx. 3,000 kg No liability is assumed for the correctness, completeness, or accuracy of the above information.

Stanje: rabljeno, Leto izdelave: 2013, potovalna razdalja osi X: 600 mm, pomik osi Y: 400 mm, pomik po osi Z: 310 mm, Pomik osi X 600 / Y 400 / Z 310 Bodpfx Aox Hgg Dsg Eedd Stroj z vodno kadjo Samodejno vpenjanje žice Hladilnik

Stanje: rabljeno, Leto izdelave: 2011, Technical Details: X-axis travel: 800 mm y-axis travel: 950 mm z-axis travel: 1020 mm Control: Sinumerik 840D sl MDynamics Operate Spindle speed: 10,000 rpm Spindle power: 26/20 kW Spindle torque: 340/262 Nm Tool holder: HSK-A 100 Tool changer: 120 positions (2x60) 2x pallet changers: 630 x 630 mm Table load capacity: 800 kg Machine weight approx.: 20 t Required space approx.: 3.3 x 6.15 x 3.2 m 6-axis simultaneous horizontal machining center with programmable rotary-tilting table (A/B-axis) The B-axis provides a swivel range of 180°, allowing the part to be machined overhead and chips to fall freely downwards. U-axis = CNC-controlled radial movement of the tool, enabling different diameters of a bore to be machined with a single tool in one operation. Dual pallet changer, pallets 630 x 630 mm 6-way hydraulic supply to pallets with coupling mechanisms, rotary union in A- and B-axis Special hydraulic pump system ICS (internal cooling, 10–80 bar), 1 clamping channel in the working area with proportional valve 10–200 bar Electromechanical tool length measuring device GROB BLUM laser for tool monitoring Tool coding Chip conveyor Bsdpfx Ageyzza Io Eodd 3D touch probe M&H Oil mist extraction Siemens HT8 electronic handwheel Rinse gun Coolant rinsing in the work area Air gun Oil skimmer Automatic door Remote diagnostics Price includes a 6th axis MAPAL Tooltronic with 2 U-axis heads: 1. LAT125-HSK100 2. LAT160-HSK100

Stanje: dober (rabljeno), Leto izdelave: 2006, potovalna razdalja osi X: 1.626 mm, pomik osi Y: 1.016 mm, pomik po osi Z: 813 mm, skupna masa: 13.611 kg, dolžina mize: 1.626 mm, širina mize: 914 mm, model krmilnika: HAAS, nazivna (navidezna) moč: 22 kVA, premer vrtljive mize: 760 mm, največja hitrost vretena: 6.000 obr/min, obremenitev mize: 4.536 kg, Oprema: transportni trak za ostružke, Commissioned 03/2006 IKZ 70 bar (TSC 1000) 30-pocket tool magazine (BT50) Full 4th axis Spindle & gearbox replaced new in 2017 Operated in single-shift operation Machine can be inspected under power !!!! Free loading until CW04/2025 !!!! (if our new machine is delivered on the same day) Bjdpfx Aevgmr Iog Eedd

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT30 - Spindle drive power: 4.9 kW - Spindle speed: 16,000 rpm LINEAR AXES - Travel X/Y/Z axes: 700 x 400 x 300 mm - Rapid traverse speed (X/Y/Z): 50 / 50 / 56 m/min - Feed speed (X/Y/Z): 1 - 30,000 mm/min - Distance from table to spindle nose: 330 - 630 mm TOOL CHANGER - Tool changer type: Umbrella - Number of tools in magazine: 21 - Tool change time: 0.8 sec TABLE - Table size: 800 x 400 mm - Max. table load: 250 kg ELECTRICAL SUPPLY - Supply voltage: 220 V - Total power consumption: 9.5 kVA WEIGHT AND DIMENSIONS - Required space: 2,050 x 2,220 mm - Machine height: 2,497 mm - Machine weight: 2,400 kg MACHINE HOURS - Power-on hours: 23,456 h - Operating hours: 16,703 h ACCESSORIES - Controller: Brother CNC-C00 - Interface: Ethernet / USB - Electronic handwheel - Option: Extended memory 500 MB - Option: High Accuracy Mode BⅡ - Rotary table type: 4th CNC axis integrated * Manufacturer: YUKIWA * Model: DRC170-EU * 4th axis travel: 360° Bedpfx Aoxzu T Sog Ejdd * Minimum 4th axis resolution: 0.001° * Clamping diameter: 140 mm * Center height: 135 mm * With counter bearing * Coolant tank: 150 l * With high pressure pump: 15 bar * With cabin washing - Through-spindle coolant supply (IKZ) - Tool measurement probe - Electrical transformer

Stanje: novo, Diameter 150 mm Workpiece length 1300 mm Workpiece width 800 mm Max. grinding wheel diameter 150 mm Bdjdjxab Hpspfx Ag Ejd Speed range 0 - 2830 rpm Working height 945 mm Head swivels +/- 180° Motor power 1.5 kW Machine weight approx. 230 kg Required space approx. 1435 x 1100 x 1510 mm The "Easy T" is the cost-effective alternative to conventional grinding and deburring machines. Its head, consisting of a grinding wheel and a flap brush, can be swiveled 180°, allowing for quick changeover between the units. The weight-balanced arm enables easy movement of the head over the workpiece, resulting in uniform edge rounding. The worktable prevents even the smallest components from slipping. Equipment: - Deburring and rounding of laser-cut or punched sheet metal parts - Grinding head consisting of a grinding wheel & a flap brush - Grinding head stations can be swiveled 180° - Working area 800 x 1300 mm - Weight-balanced arm for easy swiveling - Non-slip table surface - Ergonomic machine operation via push buttons "On/Off" - Grinding head with stepless speed control via frequency inverter - Handle for ergonomic handling

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 16.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 750 mm, pomik osi Y: 600 mm, pomik po osi Z: 520 mm, hitro pomikanje X-os: 24 m/min, hitri pomik os Y: 24 m/min, hitri pomik na osi Z: 24 m/min, proizvajalec krmilnikov: Siemens, model krmilnika: 840D, premer vrtljive mize: 800 mm, največja hitrost vretena: 14.000 obr/min, dovod hladilne tekočine: 20 letvica, vhodna napetost: 400 V, DMU 70 3+2 osi Stroj je trenutno v prenovi. Novo vreteno Nova vodila osi Y in Z Bdodpfxeyx Am Re Ag Esd Zaščitni mehovi Opozorilna okna Meritve z BallBar vključno s protokolom Siemens 840D s Shopmill - ročno kolo Vreteno SK40, 14.000 rpm Menjalec orodij za 30 orodij Notranje hlajenje 20 bar Rezervoar s trakom filtrom 600l Transporter za ostružke Kabinska streha Merilna tipalka Izpiralna pištola Način delovanja 4 Dokumentacija Na voljo od 04/2026

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 2.500 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.060 mm, pomik osi Y: 600 mm, pomik po osi Z: 600 mm, model krmilnika: Heidenhain ITNC640, največja hitrost vretena: 10.000 obr/min, V dobrem stanju ponujamo stroj Posmill CE1000 z okoli 2.500 urami vretena, z naslednjimi možnostmi: - Linearni merilni sistemi Heidenhain v oseh X, Y in Z - Krmiljenje Heidenhain TNC 640 - Zračno hlajeno vreteno - Vreteno 10.000 RPM ISO40 - Menjalnik orodij za 40 orodij ATC - Tračni filter z notranjim hlajenjem 20 barov - Dosikalna merilna sonda Hexagon - Sonda za orodje Hexagon - Transporter za odrezke - Toplotna kompenzacija vretena v osi Z Bdedeyindaspfx Ag Ejd Tehnične specifikacije: Pomik osi X: 1060 mm Pomik osi Y: 600 mm Pomik osi Z: 600 mm Stroj je znotraj toleranc novega in na voljo je geometrijski protokol.

Stanje: rabljeno, Leto izdelave: 2010, Travel path - X axis: 1,000 mm Travel path - Y axis: 510 mm Travel path - Z axis: 480 mm Travel path - X axis (rotary/swivel table): 420 mm Travel path - X axis (fixed machine table): 450 mm Control system: HEIDENHAIN iTNC 530 Spindle speed range: 50 - 12,000 rpm Number of tool changer stations: 20 Tool holder: SK40 Clamping surface, machine table: 650 x 510 mm Workpiece weight (main table): 300 kg Clamping surface, rotary/swivel table: 420 mm Workpiece weight (rotary table): 200 kg Rotary table speed: 30 rpm 5-Axis Machining Center | HEDELIUS - RS505 K IC 40/530/450/420/12, equipped with tool changer, internal coolant supply, zero-point clamping system, and chip conveyor. The machine also features a full enclosure as well as an extraction system with filter unit. With only 9,787 spindle hours, the machine has low operating hours. The machine is in well-maintained condition and can be inspected under power at any time. A machine video is available on request. Bdodox R U Rxopfx Ag Eod For further technical details, please refer to the offer. ----- #Tags: RS505 K IC 40 | RS-505 | RS 505