Vroča voda dizel 200-500bar 21-30l / min.

PTC JTR-H

Stanje: novo, Leto izdelave: 2025, Patented mitre system Continuously adjustable cutting speed Hydraulic feed control Hydraulic lifting and lowering of the saw frame Hydraulic material clamping Fsdpeh S Nxpjfx Aflopb Powerful frequency-controlled saw band drive Swivel range 30° right / 45° left Cutting capacity in mm 45° left round 300, flat 300 x 300 90° round 410, flat 620 x 410 45° right round 360, flat 420 x 360 30° right round 300, flat 300 x 300 Remnant piece length without bundle clamping 60mm Recommended options: Micro-spray system Laser line Clamping pressure regulator Powered chip brush Manual lifting roller Setup elements

Stanje: novo, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangle 350 x 200 mm Fodpfx Aefd Abaoflopb Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.61 t Required space: approx. 1.5 x 1.75 x 1.9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table - Vise laterally adjustable - Solid, large material support - Automatic cooling Illustration shows semi-automatic version.

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width Fjdpfx Ajfgyicjflepb • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Leto izdelave: 2011, Stanje: zelo dobro (rabljeno), IWN Crusader stroj za pranje zabojev / pripomočkov / tunelski pralnik Letnik 2011 V celoti iz nerjavečega jekla Sistem za pranje in izpiranje z digitalno nastavljivim termostatom Funkcija za doziranje kemikalij v sistem pranja in izpiranja Plinsko ogrevanje z možnostjo ponastavitve gorilnika Komplet z izpušnim ventilatorjem in cevmi za odvod V odličnem delovnem stanju, takoj pripravljen za uporabo. Fpedpfx Afsgqutcolob

Stanje: novo, Cutting capacity at 90°: round 350 mm Fpjdpfx Afefg E Hlelsb Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, pritisk: 1.000 letvica, obratovalni tlak: 1.000 letvica, gorivo: dizel, kapaciteta rezervoarja za vodo: 3.000 l, moč: 300 kW (407,89 KM), leto zadnje generalne obnove: 2025, tlak vode: 1.000 letvica, zmogljivost črpalke: 131 l/min, Woma 325Z P30 dizelska visokotlačna enota 1000 bar 131 l/min Fodpfx Afexb Dp Aolepb Dobro delujoč stroj, takoj pripravljen za uporabo Stroj je vgrajen v MAN TGA 26.320 6x2 leto 2007 Euro 4 le 64.000 km vozilo v odličnem stanju SAMO ZA IZVOZ

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, 1 used steam boiler ----- Manufacturer: LOOS Gunzenhausen Model: U-HD 1250 Heating surface approx.: 20 m² Boiler output max.: 1,250 kg/h Fjdpfx Afewra Ewolopb Operating overpressure: 13 bar Increased test overpressure: 23.4 bar Water content at NW approx.: 993 l Water content full approx.: 1,365 l Year of manufacture: 2000 Equipped with Weishaupt gas burner type G7/1-D, ZMD, 300–1,750 kW, gas control line, control cabinet, feed water pump, and existing coarse and fine fittings.

Leto izdelave: 2007, Stanje: rabljeno, Plant: Mobile sludge dewatering unit, mobile decanter/centrifuge Manufacturer: Hiller Model: Solid-bowl scroll centrifuge Type: DP51 Machine No.: H3991 Year of manufacture: 2007 Maximum permitted drum speed: 3,400 rpm Drum inner diameter: approx. 505 mm Fpsdpfx Asppucasfleb Drum material: ST52.0 Drum wall thickness: 13.0 mm Other: Steel swap body container with reinforced floor Accessories: Sludge feed pump, polyelectrolyte dosing pump, polymer solution pump Polymer station: 2-chamber system for liquid polymers with agitator, adjustable Twin-shaft paddle mixer: galvanized steel Total weight: approx. 4,200 kg Purchase and rental possible.

Stanje: dober (rabljeno), trenutno še 3 kosi na zalogi 1 x SEEPEX BN2-6L, 0,75 kW, letnik 2006 3 x SEEPEX Nemo 1 x NETZSCH NM045, GETRIEBEBAU NORD, letnik 2001 2 x ALLWEILER SEP 380.1A11P01 Fjdpfxolhr Hfo Aflopb 2 x ALLWEILER AE1N25-ID, GETRIEBEBAU NORD 0,75 kW, letnik 1996 1 x ALLWEILER AE1E550-ID, GETRIEBEBAU NORD 4 kW, letnik 1996 1 x proizvajalec neznan, reduktor LEROY SOMER, 5,5 kW

Stanje: novo, ROGI SAWING MACHINE TYPE CY355 INVERTER VARIABLE SPEED SEMI-AUTOMATIC Saw Blade Size ----- 3770 x 34 x 1.1 mm Saw Speeds ----- variable 20-80 M/min. Motor Power ----- 2.2 KW - 400V - 3 Phase Weight ----- 855 KG Cutting Capacity 90° ----- 355 mm / 490 x 300 mm Fedega Tzxspfx Afljpb Cutting Capacity 60° ----- 230 mm / 180 x 220 mm Cutting Capacity 45° ----- 350 mm / 290 x 340 mm Cutting Capacity -45° ---- 290 mm / 250 x 250 mm INCLUDES Saw blade Workpiece stop Base cabinet Manometer for saw blade tension Saw blade guidance with carbide guides Hydraulic quick-release vice Coolant pump Hydraulic drop-down cylinder Motor overload protection switch Automatic cut-off