Varilni gramofon, gramofon, pozicioner

Protec KT 2000

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, nosilnost: 2.000 kg, Oprema: nožno daljinsko upravljanje, 3-osni varilni rotacijski stroj, nosilnost 2 toni, v dobrem stanju vključno z ročnim daljinskim upravljalnikom (po želji tudi nožni) Nagib in hitrost sta brezstopenjsko nastavljiva od 0,05 do 1,0 obr./min Premer vpenjalne plošče: 1,0 meter Fpedpfx Aeyupgzenfjg Višina nagnjen do središča min. cca 0,7 m, vodoravno 0,9 m Višina nagnjen do središča maks. 1,6 m, vodoravno 1,8 m Dolžina 2,2 m, širina 1,35 m

Stanje: novo, Leto izdelave: 2025, Laserski vir: Raycus ali Max: 4/6/8/12 kW Laserska glava: 3D BOCI Krmilni sistem: FSCUT 5000 A Vpenjalna glava: 20–450 mm Nakladanje/razkladanje: 12000 mm X-/Y-os Natančnost pozicioniranja: ±0,05/1000 mm Ponovljivost: ±0,03/1000 mm Pospešek: 0,8g (m/s²) Rotacijska hitrost: 60 obr/min Maks. pozicionirna hitrost: 60 m/min Maks. teža cevi: 1500 kg 1. Raycus 6000W laserski vir 2. Ozobljena (bevel) laserska glava Fodpfx Asi Apfzonfjpg 3. Varjen okvir DPL 4. Schneider električni elementi 5. Poševno zobati letev KH 6. Reducir Techmech 7. Yaskawa servomotor 8. Vodila SHAC 9. Integrirano krmiljenje napajanja 10. Programska oprema FScut 5000 11. Integrirana električna omara 12. HANLI hladilnik vode 13. Konzolna MOSTNA os-X FHBS 14. Avtomatsko zbiranje odpadkov 15. Gosenični avtomatski zbiralnik obdelovancev 16. Avtomatski podpornik 17. Okvir za nalaganje 12000 mm 18. Okvir za razlaganje 12000 mm

Stanje: novo, Leto izdelave: 2025, nosilnost: 2.000 kg, Protec KT 2000 HV, hydraulically height-adjustable Fodpfjncfvhsx Anfepg Load capacity: 2000 kg Handheld remote control with digital display Double foot pedal control Height approx. min. 800 mm (tilted to center), max. height 1400 mm Min. horizontal height: 1000 mm Faceplate diameter: 1200 mm Minimum tilt angle: 135° Speed: 0.05 to 0.9 rpm Motor power: 3 kW

Stanje: novo, 2000 kg load capacity welding positioner, height-adjustable Very robust design Continuously variable speed control from 0.05 to 0.7 rpm Rotary table diameter: 1200 mm Tilting angle up to 120° Total height adjustment: 600 mm Fpededvn E Espfx Anfsg Height adjustment range: 1450 mm to 2050 mm Minimum height (horizontal): 1350 mm, tilted (to center): 1200 mm Maximum height (horizontal): 1850 mm, tilted (to center): 1700 mm Hand and foot remote control

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, skupna širina: 3.500 mm, največja dolžina izdelka: 5.000 mm, število osi: 6, This 6-axis FRONIUS UR10 robot from the e-Series was manufactured in 2022. It features a 6-axis robot with a control panel, a maximum payload of 12.5 kg, and a reach of 1300 mm. Additional features include a 4000 mm linear axis, a rotary/tilting axis with a load capacity of 250 kg, and a torch holder. Ideal for advanced welding applications. Contact us for further information about this machine. Additional equipment • Robot controller and teach pendant • Bumper (remote protection) and protective film for teach pendant • Multifunction flange for magnetic attachment to the torch neck • Balancer system for hose management • weldControl URCap software • TOUCHSENSE CAP – part location detection with welding wire or gas nozzle • CAP component OFFSET – for shifting and copying programs • Operating controls: Quick start buttons (Start / Stop / Reset / Emergency Stop, speed potentiometer, selector switch for 2-station operation) • slideONE: 4000 mm linear axis for Universal Robots with an effective robot stroke of 1600 mm • RotateTWO 250: external rotary/tilting axis for the robot with a load capacity of 250 kg, including standard product with octagonal plate (16 mm pitch-hole pattern) and table SW 600x50 • Safety technology: 1 set of laser light barriers with steel post and 1000 mm light curtain (Safety PLC for 2-station operation) Machine benefits Technical advantages • Maximum reach: 1300 mm • Welding technology: holdONE = torch holder with integrated Freedrive button, Fronius CMT torch • Ergonomic holder for the teach pendant • Supports all welding positions and ensures accessibility • Floor stand for freestanding axis on two columns, incl. leveling plates for mounting Fedjx D E Hujpfx Anfspg • The tools and 3 cabinets shown in the pictures are included in the scope of delivery. Additional information Machine still under power

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, nosilnost: 2.000 kg, Protec KT with a load capacity of 2000 kg Horizontal capacity: 2000 kg Tilted capacity: 2000 kg Variable speed from 0.05 to 0.5 rpm (modification to customer specifications available at extra charge) With dual foot control With hand control unit with digital display 380 V Clamping plate diameter: 1300 mm Height in horizontal position: 1250 mm Fedpfswtrpkjx Anfepg Height when tilted to center: 1080 mm Length: 1600 mm

Leto izdelave: 2022, stanje: kot nova (razstavni stroj), 2000 kg load capacity welding positioner, height-adjustable Complete set Continuously variable speed control from 0.05 to 0.7 rpm Turntable diameter 1200 mm Fpjdsk Adhuepfx Anfsg Tilting range from 0 to 120° Height adjustment from 1450 mm to 2050 mm Hand and foot remote control

Stanje: rabljeno, Leto izdelave: 2016, x-axis 6,800 mm y-axis 4,000 mm z-axis 1,500 mm Control: iTNC 530 HSCI Heidenhain Max. clearance between columns: 5,090 mm Distance spindle centre to table: 1,825 mm Type: 175149A-0007 Main spindle speed range: max. 19,800 rpm Main spindle drive power: 20 kW Fjdpsx Avqbsfx Anfopg Tool holder: HSK-A63 Swivel range B-axis: +115° / -115° Rotary range C-axis: +/- 200° Type: 178099-0005 Main spindle speed range: max. 10,020 rpm Main spindle drive power: 20 kW Tool holder: HSK-A100 Swivel range B-axis: +115° / -115° Rotary range C-axis: +/- 200° Clamping table area: 6,000 x 3,000 mm Max. table load: 50.0 t Height above floor: 100 mm Number of T-slots: 12 T-slot width: 28H12 mm T-slot spacing: 250 mm Number of tool positions: 62 (38+24) pos. Number of tool positions HSK A63: 37+1 pos. Number of tool positions HSK A100: 23+1 pos. Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 mm Max. tool weight HSK A63: - kg Max. tool diameter HSK A100: 80 mm Max. tool length HSK A100: 450 mm Max. tool weight HSK A100: - kg Rapid traverse (X / Y / Z): 40,000 mm/min Rapid traverse B/C: 4,320 °/min Feed rate X/Y/Z: 30,000 mm/min Feed rate B/C: 2,160 °/min Max. acceleration: 3.2 m/s² x-axis 6,800 mm y-axis 4,000 mm z-axis 1,500 mm b-axis +115° / -115° c-axis +/- 200° Total power requirement: 180 kVA Space requirement approx. 12.5 x 15.0 x 7.0 m 5-axis high-speed portal large machining centre DROOP & Rein - FOGS 40 60 C - Fork-type milling head

Stanje: dober (rabljeno), številka stroja/vozila: 5336, Load capacity: 6000 kg Fsdogbt Sqepfx Anfjpg Faceplate dimensions: 1500 x 1500 mm Tilting range: horizontal up to -145° Rotational speed: 0 - approx. 1 rpm Electrical connection: 400 V, approx. 5 kW Space requirements: 2800 x 2350 x 3250 mm Weight: 5000 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Rotation speed: 1,500/3,000 rpm Cutting speed: 2,100 – 4,200 m/min Saw height adjustment: electronic Working range (square): max. 170 x 170 mm Working range (flat): max. 300 x 150 mm Working range (round): max. 200 mm Saw feed rate: 0 – 40 mm/s, continuously adjustable Cut length: 5-950 mm (extension to 9,999 mm via multiple stroke) Feed speed (max.): 500 mm/s Weight: approx. 1,900 kg Fjdpfx Anjuiy Hrofopg Dimensions (LxWxH): 2,200 mm x 2,700 mm x 1,950 mm The machine is in as-new technical and visual condition following a completed retrofit. Thanks to its equipment and design, the machine is highly efficient and versatile for a wide range of applications. The programmed HMI control system ensures easy and highly profitable operation of the plant. The soundproof cabin minimizes noise emissions to a very low level. The machine is fully overhauled at our premises according to customer specifications. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of the ball screw spindle - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of valve terminal - Optimization of extraction performance - Overhaul of the minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additional machine features: - Soundproof enclosure - Kerf expansion (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed upon, we provide a 6-month warranty for our systems on all parts overhauled or replaced by us. Labor costs and wear parts are excluded from the warranty. Optional (available on request): - Bar clamping device for parallel sawing of multiple workpieces - Flat magazine for automatic loading of pre-materials up to 6 meters in length - Roller conveyors for pre-material - Reinforced 18.0 kW (frequency-controlled) motor - Delivery and installation at your facility - Training for your personnel