Varilna miza

Protec Lochtisch Höhenverstellbar HDL 1500 Kg

Stanje: zelo dobro (rabljeno), Self-loading press for laminated boards Orma LS/ECO/CA 30/13 Dcsdpsv Nhx Uefx Abgoi Working length: 3000 mm Working width: 1300 mm Automatic material loading Glue application system Shelves heated with oil up to 130°C Upper pressing force: 57 t Side pressing force: 9 t Year of manufacture: 2001 CE certificate

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Dsdpfx Ast Hw Shebgoci Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: novo, Diameter 150 mm Workpiece length 1300 mm Workpiece width 800 mm Max. grinding wheel diameter 150 mm Speed range 0 - 2830 rpm Dcjdpfoxab Hpex Abgoi Working height 945 mm Head swivels +/- 180° Motor power 1.5 kW Machine weight approx. 230 kg Required space approx. 1435 x 1100 x 1510 mm The "Easy T" is the cost-effective alternative to conventional grinding and deburring machines. Its head, consisting of a grinding wheel and a flap brush, can be swiveled 180°, allowing for quick changeover between the units. The weight-balanced arm enables easy movement of the head over the workpiece, resulting in uniform edge rounding. The worktable prevents even the smallest components from slipping. Equipment: - Deburring and rounding of laser-cut or punched sheet metal parts - Grinding head consisting of a grinding wheel & a flap brush - Grinding head stations can be swiveled 180° - Working area 800 x 1300 mm - Weight-balanced arm for easy swiveling - Non-slip table surface - Ergonomic machine operation via push buttons "On/Off" - Grinding head with stepless speed control via frequency inverter - Handle for ergonomic handling

Stanje: novo, Leto izdelave: 2026, skupna dolžina: 1.450 mm, skupna širina: 800 mm, skupna višina: 1.800 mm, skupna masa: 500 kg, moč: 4,75 kW (6,46 KM), FC 120 ZK Working capacity: Ø 120x120 mm, Number of belt stations (Z): 1, Dsdpfx Abjt D D Nzegjci Number of brush stations (K): 1, Abrasive belt dimensions: 120x1850 mm, Brush belt dimensions: 120xØ200 mm, Abrasive belt speed: 20 m/s, Brush belt speed: 15 m/s, Feed speed: 12 m/s, Abrasive belt motor per head (x1): 3 kW, Brush motor per head (x1): 1.5 kW, Feed motor: 0.25 kW, Total power: 4.75 kW, Current consumption: 12A, Dust extraction port per head Ø (2x): 80 mm, Dimensions: 1450x800x1800 mm, Weight: 500 kg

Stanje: novo, Leto izdelave: 2024, The Durma Tube Laser HD-TC 60220 stands for maximum precision and efficiency in tube material processing. With its impressive maximum tube diameter of Ø220 mm and the ability to cut both square profiles up to 160 x 160 mm and rectangular profiles up to 200 x 100 mm, this tube laser offers exceptional flexibility for a wide range of applications. Thanks to the advanced automatic loading system, which can handle tubes up to Ø170 mm in diameter, and the capability to process materials up to 6500 mm in length, the HD-TC 60220 is ideal for projects requiring rapid production while maintaining consistently high quality. The minimum material length for automatic loading is 3000 mm, further enhancing the machine's efficiency and reducing processing time. Max. tube diameter: Ø220 mm Laser power: 3 kW Max. dimensions of square profile: 160 x 160 mm Djdoq Tpkyjpfx Abgeci Max. dimensions of rectangular profile: 200 x 100 mm Min. tube diameter: 20 mm (12 mm with manual loading) Max. tube diameter for automatic loading: Ø170 mm Max. profile dimensions for automatic loading: 150 x 100 mm, 120 x 120 mm Max. material length: 6500 mm Min. material length for automatic loading: 3000 mm Last piece length: 4000 / 6000 mm Discharge length: 150 mm Max. material weight per meter: 52 kg/m Max. material weight (total length): 340 kg Max. loading weight: 3000 kg Profile types: round, square, rectangular, elliptical Open profile types: L, U

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, številka stroja/vozila: 7771, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, hod: 300 mm, obratovalna hitrost: 75 mm/s, hitrost vzvratne vožnje: 75 mm/s, višina mize: 900 mm, globina grla: 1.000 mm, skupna širina: 3.100 mm, skupna masa: 8.900 kg, potovalna razdalja osi X: 1.000 mm, model krmilnika: EC20 - graficzne 2D, delovna širina: 3.000 mm, upogibna sila (maks.): 100 t, zadnji prislon: 1.000 mm, hitrost zadnjega prislona os R: 250 mm/s, Razdalja pomika zadnjega prislona, os R: 200 mm, pomik zadnjega naslona os Z: 1.000 mm, razdalja med stojali: 3.000 mm, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: polavtomatski, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, vrsta aktuacije: električni, Oprema: CE označba, evropski sistem vpenjanja orodij, nujno zaustavitev, varnostna svetlobna zapora, Servo-električna upogibna stiskalnica SAFANDARLEY tip E-Brake 100-3100 NS (100T - 3060 mm) Orodjni sistem AMADA Proizvajalec Nizozemska - Lochem Smo uradni zastopnik podjetja SafanDarley za Poljsko. - Servo-električni pogon - Tlak 100 T - Dolžina upogibanja 3060 mm - Hod 300 mm - CNC upravljanje po oseh Y1 / Y2 / X / R / Z1 / Z2 Dodpsylt Ukefx Abgjci - Zadnji prislon krmiljen v 4 oseh CNC - X / R / Z1 / Z2 - Grafično 2D upravljanje – model EC20 - Programabilna svetlobna zavesa - Orodjni sistem AMADA - Orodjni sistem WILA – spodnja sponka, možne matrice 4V / 2V / 1V / tip T z osnovo 60 mm - Kompenzacija spodnje mize – »CROWNING«

Stanje: dober (rabljeno), Leto izdelave: 1975, Meuser horizontal boring and milling machine, model M 76 BF, 5.5 kW, drilling depth 76 mm, spindle taper MK 5 Dcodpjt T Rkdsfx Abgoi Table 1000 x 1000 mm

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), Cloos welding robot Qirox QRC 320 including V 6 controller, Djdsizwv Nepfx Abgeci Pedestal for upright installation, Cloos welding machine Quinto II 603 (600 A), wire feeder, welding torch, torch hose package, mechanical cleaning, pressure booster 1 rotary tilting table WPK 5000, load capacity 500 kg, 1 pre-selection start, 1 control for customer-supplied sliding door Gas nozzle sensor, arc seam tracking, point editor The system will be completely overhauled and serviced before delivery. A second station with an additional identical rotary tilting table is possible.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, *Video je samo primer, kako se lahko pripravi to celico Celica z brusilnim robotom Kuka KR 180 Brusilna celica Berger 2012 (zunanje brušenje A1) - Skupna masa cca 6300 kg - Dimenzije celice: cca 4650 x 2400 x 3100 mm 6-osni robot Kuka KR 180 R2500 Extra - Leto izdelave 2011 - Krmiljenje KRC 4 - Dodatna os (7. os) Trakasta brusilna postaja BSS10 - max. dimenzije traku 3500 x 30 mm - max. premer kontaktnega kolesa 200 mm - Moč motorja 4 kW 2 x polirni postaji, - Premer polirnega koluta 350 - 600 mm - Moč 5,5 kW Dcsdpfx Aeg Saqvsbgei Omarica za menjavo prijemal Trakasti transporter Interoll Automation GmbH - Skupna dolžina cca 2000 mm - Širina traku cca 440 mm Imamo 4 takšne celice.

Leto izdelave: 2018, stanje: kot nova (razstavni stroj), Welding positioner KT 50 Horizontal load capacity: 50 kg, tilted: 25 kg Power supply: 220V, 50 Hz Table diameter: 320 mm Table height: 400 mm, tilted to center: 300 mm Length: 650 mm, width: 650 mm Dedpfx Absd A Etyjgeci Infinitely adjustable tilt range via geared crank motor: 0 – 90° Speed: 1.7 – 15 rpm Incl. foot remote control