Pritisnite zavorno orodje

Promecam 60/120/415 mm

Stanje: rabljeno, Sečnja hlodovine: 100–150 m³/h Sečnja manjših ostankov: 50–100 m³/h Teža: 3.165 kg Največji premer hloda: 254 mm Sekalnik Söderhamn Eriksson 670-56 CC z električnim motorjem. Sekalnik Söderhamn Eriksson 670-56 je namenjen izdelavi sekancev za proizvodnjo celuloze, vlaknenih in ivernih plošč. Za surovino se lahko uporabljata tako okroglo lesno deblo kot tudi odpadek iz žagarskih obratov. Ledehclffjpfx Aacsrh Podajanje lesa pri sekalniku 670-56 poteka vodoravno, pod kotom 37,5° glede na vlaknasto smer. Sekanci enakomerne, visoke kakovosti se lahko izločajo na dnu ali pa se odpihnejo naravnost navzgor. Bodite med tistimi lesno-predelovalnimi podjetji, ki znajo pametno upravljati z razpoložljivimi viri.

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) Lodpfx Aaou Aa I Secerh with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Leto izdelave: 2018, Stanje: zelo dobro (rabljeno), consisting of two toothed belt axes EGC-80-1300-BS-10P-KF-0H-ML-GK and four linear guide rails HGR 20C 1705V9-10A00 with HIWIN linear blocks HGW CCC 170 3W3-10200 Two Unimotors 075E3C300BACAA075140 with two EMERSON UNIDRIVE M 701-3200050A Lrjdpjg Ixumefx Aaceh

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, 1 rabljeni stroj za umetanje Haeger 412 za umetanje umetaka u lim (studs i matice sa samourezivanjem) na prodaju. U kompletu s alatom i donjim alatom u obliku slova J. Ledpfx Aaowbhipjcsrh

Stanje: zelo dobro (rabljeno), Pressure: 0.5 - 20 t Workpiece diameter: max. 5 - 75 mm Thread length: 2000 mm Pitch: 8 mm Roll spindle mount diameter: 69.85 mm Tool diameter: 200 mm Roll spindle speed: 20 - 90 rpm Stroke: 0 - 20 mm Total power requirement: 7.5 kW Ledpfx Asvpaa Rjacsrh Machine weight: approx. 3.1 t Space requirement: approx. 1.9 x 1.1 x 1.2 m

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Oil Hydraulic Double Column Press 400 T with Sliding Table Press Design: Double column press Thermally neutral: 80 – 120 °C Number of operator sides: 1 side Forces Pressing force, max.: 4000 kN Stripping force, max.: 400 kN Pressure build-up time (closed tool, steel on steel): max. 4 sec. Dimensions: 3,800 mm length x 4,475 mm width Max. opening width: 800 mm Stroke: 800 mm Table height above floor: 1100 mm Height above floor (overall machine height): approx. 4300 mm Minimum hall height: 5500 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight Total weight of the press (without operating fluids and table plate): approx. 28 tons Press table Table size: 1500 x 1500 mm Lodsph Uk Nopfx Aacsrh Speeds Fast closing: 100 mm/sec Pressing speed: 8 – 3 mm/sec Sound Pressure Sound pressure level (measured at 1.5 m height at the control panel, per DIN 45635-T16-KL3): max. 78 dB(A) Hydraulics Number of press/drive cylinders: 1 pc. Operating pressure, max.: 300 bar Pressure build-up time (pressing): 4 sec. Pressing stroke pressure accuracy: +/- 3 bar Main pump: BOSCHREXROTH axial piston pump, approx. 145 L/min Oil volume: HLP 46 MW approx. 1000 liters Ambient temperature, max.: 40°C Oil temperature, max.: 55°C Preheat temperature: °C Auxiliary pump: BOSCHREXROTH gear pump 10 L/min, pressure maintenance up to 300 sec. Electrical Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic connection main motor: 40 kW Sliding Table Press with 400 T Capacity Closing speed up to 100 mm/sec (adjustable via touchscreen) Opening speed up to 100 mm/sec (adjustable via touchscreen) Initial pressing speed 10 mm/sec (adjustable via touchscreen) Table plate size: 1500 x 1500 mm Ram size: approx. 1600 x 1500 mm Oil temperature monitoring: 55°C warning, 60°C shut-down Automatic lubrication (adjustable via touchscreen) Free positioning of the ram (adjustable via touchscreen) SICK/PILZ light barriers, 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram locks Oil circuit cooling (adjustable via touchscreen) Ejector in table, 20 T pressing force, 350 mm stroke Ejector moves externally with the table Table plate, precision milled, with DIN 22 T-slots Pressure adjustment from 60 T up to 400 T (adjustable via touchscreen) Travel limiter adjustable by pressure or position Setup, single stroke, and cycle operation (adjustable via touchscreen) Swiveling control panel on the cabinet Two-hand operation, with open button, manual/single stroke/cycle switch Assembly, commissioning, operator training at extra charge Control system by SIEMENS (S7 1200), including 9-inch touchscreen monitor. Remote maintenance unit SECOMEA - Ethernet included in scope of supply. Side of the press with two windows (1000 mm high, 800 mm wide) with double doors each. (Sliding table press, hydraulic press, double column press)

Stanje: novo, Leto izdelave: 2025, PROD-MASZ is a machinery manufacturer introducing a completely new standard of equipment quality. We take personal responsibility for every stage of production for our offered machines, ensuring the highest standards and workmanship quality. Our many years of experience allow us to develop durable, reliable, and user-friendly equipment. We place particular emphasis on functionality, operator comfort, and ergonomic design, which has established us as a leader in both domestic and international markets. Model: ZGR-3140/1.0 - Maximum working width: 3140 mm - Bending capacity: up to 1.0 mm (steel sheet) - Maximum bending angle: 145 degrees - Bending beam thickness: 20 mm - Cutting with the rotary shear across the full working width - Upper beam can be raised to three positions - Throat opening: 80 mm - Degree scale - Angle stop - Depth stops Ljdpfscntnksx Aacjrh - Weight: approx. 560 kg - Rotary shear (maximum cutting capacity up to 0.8 mm / steel sheet) + €350 - The machine complies with CE directives and comes with a 12-month warranty. Delivery cost to Germany: €360.00 Delivery cost to Austria: €360.00 Delivery time: 2-4 days Cash on delivery We look forward to hearing from you!

Leto izdelave: 2025, Stanje: novo, Manual Length Stop MD 50 h – Precise Measuring & Positioning with Handwheel and Digital Measurement Display The manual length stop MD 50 h, featuring a handwheel drive and digital measurement display, is the ideal solution for frequently changing cut lengths and for precise positioning of long materials. Thanks to rapid adjustment via the handwheel and exact digital distance measurement, you can increase efficiency and quality in your production processes. Technical Data & Advantages: ✔ Handwheel drive for carriage movement – precise & quick adjustment ✔ Digital actual-value length display – exact positioning across the entire working range ✔ Direct distance measurement via sensor/magnetic tape – highest precision ✔ Pneumatic stop clamping with high holding force – secure position locking ✔ 8-fold ball-bearing carriage – stable & durable ✔ Measuring lengths from 1 m to 6 m (optionally up to 20 m) – individually adjustable ✔ Cable chain with steel trough – robust construction for industrial applications ✔ Available in left- or right-hand versions – flexible for various machine layouts Ledpeidln Tjfx Aacsrh Can be retrofitted to existing machines and roller conveyors! Contact us now & secure your offer!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 30 h, Oprema: centralizirani mazalni sistem, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, Tube Laser Cutting System – The Ideal Entry-Level Solution. Simplicity meets efficiency with the Durma HD-TC COMPACT 60250 entry-level tube laser. Perfect for craft businesses, metal fabricators, and more, this laser is designed for those looking to take their first steps into tube laser processing. It offers straightforward operation, reliable performance, and excellent value for money. Discover how the Durma HD-TC COMPACT 60250 can enhance your manufacturing process with precise cuts and user-friendly technology—adding true value to your business. 3 kW Laser Power Maximum Sheet Thicknesses: - Mild Steel: 12 mm - Stainless Steel: 6 mm - Aluminium: 6 mm - Copper: 3 mm - Brass: 6 mm Capacity: - Max. tube diameter: Ø250 mm - Max. square profile dimensions: 160x160 mm - Max. rectangular profile dimensions: 200x150 mm - Min. tube diameter: 16 mm - Max. material length: 6000 mm - Min. remnant length: 65 mm - Discharge length: 3000 mm - Semi-automatic unloading unit: Optional (6 m) - Max. material weight: 58 kg/m - Max. total workpiece weight: 350 kg - Supported profile types: round, square, rectangular, elliptical - Open section types: I, C, L - Max. open section dimensions: 240x240 mm Dynamics: - X-axis: 40 m/min - Y-axis: 94 m/min - Z-axis: 30 m/min - A-axis: 510°/s Accuracy: Lsdpfxorkntco Aacorh - Positioning accuracy: ±0.2 mm - Positioning repeatability: ±0.05 mm - Tube center detection with capacitive sensor: Yes Available Configuration Options: LASER POWER OPTIONS: - Upgrade to DURMA LASER SOURCE BRILASE 4 kW ADVANCED fiber laser (incl. chiller) + Durma cutting head - Upgrade to DURMA LASER SOURCE BRILASE 6 kW ADVANCED fiber laser (incl. chiller) + Durma cutting head ADDITIONAL OPTIONS: - Air filtration system (40 bar N₂ + 16 bar O₂ + 16 bar air) - Air filtration system (40 bar N₂ + 16 bar O₂ + 40 bar air) - CNC bevel cutting head (+/- 45°) - Semi-automatic front loading system - Discharge table (6 m) with conveyor belt - Discharge table (3 m) with conveyor belt - Additional dongle software - Transformer 220, 440, 575V SOFTWARE OPTIONS: - Durma Cloud license + D-Mobile + Smart Watch - STEP importer

Stanje: rabljeno, prevoženi kilometri: 19.950 km, prva registracija: 11/1989, vrsta goriva: dizel, konfiguracija osi: 4x4, vrsta prenosa: mehanski, Leto izdelave: 1989, Oprema: pogon na vsa štiri kolesa, Mercedes-Benz 1428 AF 4x4 (center and rear axle differential locks, low-range gearing) with 7 seats Water tank: 2,500 liters Pump: Metz with 2,800 l/min capacity Additional equipment: Rapid intervention hose reel on right side with 50-meter hose Ljdpfx Aofarx Usacorh Dimensions (LxWxH): 7,100 x 2,300 x 3,000 mm Wheelbase: 3,800 mm Tires: 275/70 R22.5