Sistem za ravnanje pločevine

Pro Industrial AP-16-20

Stanje: dober (rabljeno), NC Rotary Table with Motor Drive Continuously Adjustable Rotary Table (Indexing 0.001°) Kodpefr Ih Dsfx Af Njll Manufacturer: Rückle Model: PKT 1000 Clamping Surface: 1400 mm x 1400 mm Overall Height: 319 mm Clamping Slots: 7 units Slot Size: 22 H7 mm Slot Pitch: 160 mm Centering Bore: 140 H6 mm Condition: Very good (used) Optional with machine base About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, and control system modernization. Our services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system upgrades

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 001669, Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outer diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Decoiler with auxiliary drive and brake Fixed coil loading saddle + decoiler traversing device Included: High-Performance Precision Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine No.: 001669 Maximum pass-through width: 620 mm Number of straightening rolls: 9 Straightening roll diameter: 50 mm Material thickness: 0.7 to 6.0 mm Klsdpfx Aohigmbef Nol Straightening rolls are multi-point supported against deflection All rolls driven via distribution gearbox and cardan shafts. Used, as-is ex stock, immediately available. Overhaul available on request. Delivery time by arrangement. Further data available shortly or on request.

Stanje: novo, Dimensions (LxWxH): 1,630 x 700 x 1,200 mm Approx. Weight: 480 kg Total Power Requirement: 1.1 kW Bending Radius: 2 mm Sheet Thickness: 3 mm Sheet Length: 1,050 mm Technical Data Sheet Rolling Machine Roller Diameter: 90 mm Rolling Speed: 6 m/min • Asymmetric roller arrangement • 2 rollers driven by brake motor • Rear roller adjustment via handwheel • Swiveling top roller • Conical rolling device • Double foot switch for forward/reverse operation • Lower and rear rollers with wire grooves • Operating manual in GERMAN EXTRA: hardened rollers EUR 900,-- Kjdpjd Eqqqofx Af Nell See the catalogue at the following link:

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1991, najv. debelina jeklene pločevine: 16 mm, dolžina rezanja (maks.): 6.000 mm, HIDRAVLIČNE ŠKARJE LVD MVSB 62/16 Serijska številka: 18478 Leto izdelave: 06/1991 Kljdpfeumhm Aex Af Nel TEHNIČNE SPECIFIKACIJE Maks. debelina pločevine St45: 16 mm Dolžina reza: 6200 mm Razdalja med stebri: 6400 mm Izmaknjenost (grlo): 60 mm Območje zadnjega odmika: 1000 mm Min. kot rezanja: 0,5 ° Maks. kot rezanja: 2,5 ° Min. število rezov/min.: 6 Maks. število rezov/min.: 25 Min. zračnost nožev: 0,05 mm Maks. zračnost nožev: 1,6 mm Moč motorja: 30 kW Približna masa: 35.000 kg Dimenzije (DxŠxV): 7100 x 2400 x 3000 mm Priložena oprema: - ELGO P85 “GO-TO” krmilnik za zadnji odmik - Električna nastavitev zadnjega odmika do 1000 mm - 1x čelna podpora 2 m, ena s 90° kotno roko, čelna podpora L2000 mm - Nožno stikalo - Kroglični ležaji na mizi - Nastavljiv zadnji odmik z ročno hidravlično črpalko

Stanje: rabljeno, Leto izdelave: 2008, Used drilling center by CMA Model: TRD 40 CN 9000 Table length: 9000 mm Maximum capacity: 40 mm Automatic tool changer Kledewc Ndwjpfx Af Njl Year of manufacture: 2008

Leto izdelave: 2022, Stanje: novo, Ostas 3-Roll Plate Bending Machine SBM 1270 x 95 Special features included in the price: • Hardened rolls • Motorized rear roll adjustment • Digital display Features: Kodpfxog Tzbho Af Nell • Asymmetrical 3-roll plate bending machine with motorized drive • Hardened rolls • Motorized rear roll adjustment • Digital display • Swivable upper roll • Cone bending device • Foot pedal Technical Details: • Sheet width: 1270 mm • Sheet thickness: 3.0 mm • Roll length: 1270 mm • Roll diameter: 95.0 mm • Minimum bending diameter: 140.0 mm • Motor power: 1.1 kW • Dimensions (L x W x H): 2100 x 760 x 1250 mm • Weight: 470 kg

Stanje: rabljeno, Leto izdelave: 2007, Working width: 1,380 mm Workpiece height: 70 mm Total power requirement: 45 kW Machine weight approx.: 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding system Type: EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Factory no.: 780063 _____ Grinding width approx.: 1,380 mm Roller width: 1,400 mm Maximum workpiece height: 1 – 70 mm Feed speed, infinitely variable: approx. 1.5 – 8 m/min Consisting of 5 working units: Oscillating grinding roller for abrasive cloth (non-woven abrasive) Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts 350 mm Ø, drive 2 x 5.5 kW, abrasive flap wheels or non-woven flap wheels, adjustable for wear. Brush roller unit for fitting 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, also ideal for removing oxide layers. Wet grinding system with band filter unit and closed water circuit, installed under the feed belt and easily retractable from the machine. Washing and drying unit, designed for minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece is transported from the front via a continuous conveyor belt Ksdpfst Hw Iiox Af Njll (minimum part length 350 mm) with a vacuum suction system across 300 mm on the right and a magnetic track 300 mm wide, suitable for holding small parts up to a minimum length of 80 mm. Frequency converter for stepless speed regulation of the abrasive flap brushes from 250 – 1,000 rpm (position 2, top), as well as for belt feed. Control panel with clear controls and digital display for roller adjustment, 4 ammeters for monitoring roller drives, status LEDs. Quick-change facility for lateral extraction of abrasive flap brushes, as well as a range of replacement rollers with non-woven abrasive and brush trim. Total drive approx.: 45 kW - 400 V - 50Hz Weight approx.: 5,500 kg Condition: Good to very good Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Stanje: novo, Leto izdelave: 2023, Vysoce přesné rovnání – Leveler Bosporas vyrábí průběžné a kusové rovnací stroje. K dispozici jsou modely 4H, 6H a vláknové rovnací stroje. Klodoh Dzg Ujpfx Af Njl Abychom vám mohli připravit cenovou nabídku, sdělte nám prosím typ materiálu, tloušťku a šířku.

Stanje: novo, Fastech 3-Roller Plate Bending Machine FRM 1250 x 90 Technical Specifications: Special equipment included in the price: - Hardened rollers - Motorized rear roller adjustment - Digital display Klodohzq Dqepfx Af Nel Sheet width: 1250 mm Sheet thickness max.: 3.0 mm Sheet pre-bending thickness: 2.5 mm Roll length: 1250 mm Roller diameter: 90 mm Smallest bending diameter: 130 mm Weight: 500 kg Dimensions (LxWxH): 1950 x 900 x 1130 mm Motor: 1.1 kW Features: - Electrically driven upper and lower rollers - Swiveling upper roller - Conical bending device - Asymmetric roller arrangement - Self-braking main motor - Separate control and operating panel - Safety rope All values based on St-37 / 240 N/mm² CE-marked

Stanje: rabljeno, Leto izdelave: 1992, Technical Details: Spindle diameter: 100 mm Klodpfx Aeu Idqbsf Nol X travel: 1500 mm Y travel: 1450 mm Z axis: 930 mm W axis: 506 mm B axis (table): 360° Control system: Heidenhain TNC 407 Tool holder: SK50 Spindle speed: 5 - 1,600 rpm / stepless Table load capacity: 4.0 t Table size: 1100 x 1400 mm Rotary table: 360° Feed rates (X/Y/W/Z axis): 2 - 2000 mm/min Rapid traverse (X/Y/W/Z axis): 5000 mm/min Total power requirement: 40 kW Switch cabinet dimensions: 2000 x 600 x 2000 mm Machine dimensions (LxWxH): 4.9 x 3.7 x 3.8 m Machine weight approx.: 14 t CNC drilling and milling machine with hydraulic power unit Equipment: Measuring probe Electronic handwheel Hydraulic counterbalance Y-axis Universal milling head And a range of accessories – please inquire! Subject to prior sale.