Krožne škarje

Prinzing KSE 25/10

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Hydraulic Punching Machine Brand: Boschert Model: Ecco Line EL 500 Digital Specifications: • Punching force: 28 t • Worktable dimensions (width x length): 500 x 1000 mm • Maximum sheet thickness: 6 mm (up to 40 mm punch diameter) • Maximum die diameter: 105 mm (up to 1 mm sheet thickness) • Maximum strokes: 180 strokes/min • Connected load: 5 kW • Voltage: 3 x 400 V / 50 Hz • Total weight: 2 tons • Dimensions of the EL-500-Digital punching machine (length x width x height): 2400 x 1580 x 1540 mm Gbsdpfx Aern Swkefqjg • Tool cabinet, 4 drawers for tools • Foot pedal • All accessories shown in the photos are included.

Stanje: generalkompletno obnovljen (rabljeno), Maximum pressing force: 180 kN (18 tons). Stroke rate: 100 to 600 strokes per minute. Gbedpfx Aofmavxefqsg Maximum strip width: 60 mm. Maximum feed length: 60 mm. Maximum strip thickness: 2 mm. Adjustable stroke: 4 - 36 mm. In very good condition. Programmable speed and number of strokes. Three operating modes: manual, single stroke, and automatic. Pneumatic clutch and brake. Machine comes with a 6-month warranty. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx. 1.2 tons. Power consumption: 2.2 kW. Technical air supply: 8 bar. More high-speed presses in stock, including Bruderer models BSTA 18, 20, 30, 200, 50, as well as Schaal and Mabu presses.

Stanje: dober (rabljeno), Leto izdelave: 1986, številka stroja/vozila: 8618030, Offer 25182 Technical Specifications: - Max. working width: 2,040 mm - Max. material thickness: 4 mm - Roller diameter (each): 140 mm - Stroke: 70 mm - Rear and lower rollers adjustable for conical bending - Upper and lower rollers driven by motor - Working speed, forwards and backwards: 6 m/min - Drive: 380 V / 6.2 kW Gbodpswq It Tjfx Afqeg - Space requirement (approx.): W 3,560 x H 1,100 x D 870 mm - Weight (approx.): 1,700 kg - Includes: - Asymmetric roller arrangement - Crowned, through-hardened rollers - Manual rear roller adjustment - Pre-bending - Swiveling upper roller - Electric foot switch for forward and reverse operation

Leto izdelave: 2020, Stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction Gbsdpfx Afofzktzeqog The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Leto izdelave: 2022, Stanje: novo, Ostas 3-Roll Plate Bending Machine SBM 1270 x 95 Gbedog Tzbhepfx Afqog Special features included in the price: • Hardened rolls • Motorized rear roll adjustment • Digital display Features: • Asymmetrical 3-roll plate bending machine with motorized drive • Hardened rolls • Motorized rear roll adjustment • Digital display • Swivable upper roll • Cone bending device • Foot pedal Technical Details: • Sheet width: 1270 mm • Sheet thickness: 3.0 mm • Roll length: 1270 mm • Roll diameter: 95.0 mm • Minimum bending diameter: 140.0 mm • Motor power: 1.1 kW • Dimensions (L x W x H): 2100 x 760 x 1250 mm • Weight: 470 kg

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. TECHNICAL DATA: Gjdpfx Aenh R Ekefqobg • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, laserska moč: 12.000 W, najv. debelina jeklene pločevine: 80 mm, maks. debelina medeninaste pločevine: 80 mm, dolžina mize: 3.000 mm, širina mize: 1.500 mm, potovalna razdalja osi X: 1.550 mm, pomik osi Y: 3.050 mm, pomik po osi Z: 290 mm, teža obdelovanca (maks.): 1.400 kg, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, skupna dolžina: 9.100 mm, skupna širina: 3.120 mm, skupna višina: 2.200 mm, trajanje garancije: 24 meseci, delovno območje: 3.015 mm, Oprema: centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, menjalnik šob, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, Brandneue Full-Cover-Faserlaserschneidemaschine | GS-CE/ GS-CE PRO-Serie | 3000–60000 W MACHINE IN STOCK - AVAILABLE Gbodpfx Asub Nwdjfqeg This FULLY COVERED FIBER LASER CUTTING MACHINE from the GS-CE series provides maximum safety for metal cutting. Thanks to the full enclosure and the observation window made from protective glass, you can monitor the process and avoid hazards such as laser radiation, sparks, etc. It also features an exchangeable table with rapid changeover—table can be swapped within 10 seconds. It is the ideal solution for safe and efficient metal cutting! Working area sizes: 3000 mm * 1500 mm, 4000 mm * 1500 mm, 6000 mm * 1500 mm, 6000 mm * 2500 mm; Laser power: 6 kW - 80 kW CNC controller: FSCUT Max. acceleration: 4G BOCI cutting head Intelligent anti-collision function Automatic lubrication Schneider relay Laser fault alarm Cooling system fault alarm Laser safety glass Water chiller TÜV CE certificate Optional: automatic loading and unloading system The control unit supports graphic formats: AI, BMP, Dst, Dwg, DXF, DXP External programming System is delivered complete including chiller, extraction unit, and safety light barriers Demo machine - as new condition

Stanje: novo, Leto izdelave: 2025, premer valja: 140 mm, dolžina valja: 1.570 mm, - Capacity 1570 x 4.5 mm - Electrically adjustable rear roll - Electrically adjustable bottom roll (material clamping) - Digital readout for rear roll movement - Digital readout for bottom roll movement (material clamping) - Hardened rolls Gedsgg Nv Ijpfx Afqjbg - Conical rolling - Brake motor - Emergency stop - Documentation - 400V

Leto izdelave: 1979, Stanje: rabljeno, Outreach: 22/29 mm Drive motor: at 380 V approx. 0.55 kW Space requirement: 450 x 500 x 560 mm Gjdpfx Aszif Sjfqebg Weight: approx. 6.5 kg Pressing force: 30 kN

Stanje: rabljeno, Sheet width: 250 mm Coil outer diameter: 1400 mm Load capacity: 2500 kg Sheet thickness: 2 ... 4 mm Gbedpfx Afefn Aqmeqsg Straightening speed: 2.5 ... 15 m/min Decoiler: expansion range in mm Total power requirement: 1 + 4 kW Machine weight: approx. 1.8 t Space requirement: approx. [missing data] Decoiler MHR 250/4: Max. coil diameter: 1400 mm Inner coil diameter: 450 - 530 mm Unbraked decoiler with hold-down roller Straightening machine MR 250/4: Strip entry height: 1250 mm The system has been dismantled, tested, and newly painted.