Obdelovalni center - navpično

POS POSmill C 1050

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 18.800 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 530 mm, pomik po osi Z: 630 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: Heidenhain iTNC 530, širina mize: 1.150 mm, dolžina mize: 560 mm, obremenitev mize: 700 kg, skupna masa: 7.800 kg, največja hitrost vretena: 10.000 obr/min, delovne ure vretena: 3.600 h, število mest v zalogovniku orodij: 30, dolžina orodja: 250 mm, teža orodja: 6.000 g, Oprema: dokumentacija / priročnik, transportni trak za ostružke, POSmill C 1050 Vertical Machining Center, year of manufacture 2011, incl. Lehmann TF Vario X 510.520 4th/5th axis (see right) (without LANG clamp) Lhsdpfxjxzhfno Aacec Equipped with M&H probing system / tool measurement, 1x POSfix 100mm vise (see left), 1x quadruple clamping system (see center) 30 tool stations in the magazine, SK40 taper. Internal coolant supply, air through spindle, chip conveyor, etc.... The machine is in very good condition, with very low hours (3600 spindle hours) and, in comparison, significantly fewer hours on the Lehmann 4th/5th axis. Inspection under power is possible (almost) anytime by appointment. Single-user operation (the machine was exclusively operated by myself). Reason for sale is a private accident about two years ago. For further questions and optional accessories regarding the machine and the Lehmann 4th/5th axis, I am happy to assist you. Note: LANG clamps and the tools in the magazine visible in the pictures are NOT included in the sale price and are shown for illustration purposes only!

Stanje: dober (rabljeno), Leto izdelave: 2009, Ref. No.: 10556 Manufacturer: DMG MORI Model: DMC 60 FD Year of manufacture: 2009 Control type: CNC Control system: Siemens 840DSL-721 Location: Halberstadt Country of origin: Germany X travel: 630 mm Y travel: 800 mm Z travel: 850 mm Max. workpiece diameter: 600 mm Max. workpiece weight: 400 kg Spindle speed: 12,000 rpm Tool changer: 60 positions Max. workpiece height: 500 mm Machine weight approx.: 10 t Number of pallets: 2 Motor spindle: 24,000 rpm Additional information: - Internal cooling - B-axis swivel range -5/ +110° - Cooled table console, table bearings, and motors - Cooled bearing blocks and spindle nuts on the ball screws - Cooled guides in the linear axes X/Y/Z - Drive power: 100%ED/40%ED 24 kW/35 kW - Chip conveyor - Internal coolant supply - Electronic handwheel - Rotary table with turning function - Operating mode 4 - 2 pallets, ø 630 mm - Pallet rotary changer - ICS 40 bar, 980 liters, paper band filter - Dsc Htetzywvjlwwxokp Lhodpexc Tt Tofx Aacjc - Heidenhain probe - 3D Quickset The machine can be inspected under power by arrangement.

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0-115 rpm, grinding wheel peripheral speed 45 m/sec, grinding diameter 2-150 mm, grinding wheel drive 45 kW, machine weight 6.5 t, required space approx. 3.0x1.5 m. Before sale, the machine will be fitted with a new Siemens S7 control system including a new operator panel, and the dressing quill for the grinding wheel is electrically actuated via servo motor. The machine will be thoroughly checked, with defective parts repaired or replaced. Lhjdpjuy Ifgofx Aacoc Various options possible (coolant system, loading/unloading devices, workpiece rulers, etc.).

Leto izdelave: 1990, Stanje: dober (rabljeno), CNC 4th Axis Lhjdpegabu Ujfx Aacoc Make: NIKKEN Type: CNC-200 Year: 1990 with tailstock and base plate.

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 5.900 h, potovalna razdalja osi X: 350 mm, pomik osi Y: 220 mm, pomik po osi Z: 220 mm, Wire diameter 0.1–0.3 mm Automatic re-threading Water bath Operating hours 5900 h Travel paths X 350 mm Y 220 mm Z 220 mm Lhodpewzyr Aofx Aacec U 350 mm V 220 mm Year of manufacture 2008

Stanje: rabljeno, Tool presetting device EZSET EZ400 Ledpsuhb Stjfx Aacjhc

Stanje: rabljeno, Leto izdelave: 2008, potovalna razdalja osi X: 650 mm, pomik osi Y: 650 mm, pomik po osi Z: 680 mm, največja hitrost vretena: 24.000 obr/min, Lot no. 5.3-745 1 used horizontal machining center Heckert HEC 400D, year of manufacture 2008 CNC control Sinumerik 840D NC rotary table, B-axis Tool magazine for 80 tools Pallet changer device, 2 pallets 400 mm x 400 mm Through-spindle coolant supply (IKZ) Chip conveyor Coolant system Technical data: X-axis travel (longitudinal): 650 mm Y-axis travel (vertical): 650 mm Z-axis travel (cross): 680 mm B-axis: 360° Spindle taper: HSK 63A Lsdperairwefx Aacjhc Spindle speed range: 24,000 rpm Tool stations in changer: 80 Machine weight approx.: 13,000 kg Technical data, accessories and machine description are non-binding.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, skupna višina: 2.777 mm, potovalna razdalja osi X: 700 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 660 mm, skupna masa: 1.265 kg, število osi: 3, This 3-axis Hexagon GLOBAL CLASSIC was manufactured in 2019. This CMM device is ideal for precise measurements and provides a reliable solution for enhancing quality control processes. Take advantage of the opportunity to purchase this Hexagon GLOBAL CLASSIC CMM. Contact us for further information. Additional Equipment • Compressed air supply: Min. air pressure: 0.5 MPa / Max. air consumption: 70 NI/min / Minimum supply pressure: 0.5 MPa (5 bar) / Minimum inlet flow (ANR) UNI ISO 8778: 7.5 dm³/s • Compressed air quality: Maximum oil concentration in air: 5 mg/m³ / Maximum solid particle size in compressed air: < 0.04 mm / Maximum particle concentration in compressed air: 3(*) • Dynamic performance: 3D positioning speed: 510 mm/s / Max. acceleration: 1700 mm/s² / Resolution: 0.039 µm Machine Advantages Technical advantages of the machine: • Maximum workpiece weight: 900 kg Lhedpfx Aaox D Em Uocec Main system: • Dell Precision Tower 5820 workstation • Pre-installed PC-DMIS 2019 metrology software Probe / Sensor system: • HP-S-X1S scanning sensor • HR-X1S automatic probe changer with 6 slots Calibration and fixturing equipment: • Standard calibration artifact • Swift-Fix kit with silver base plate (400 × 600 × 12 mm) Accessories (Standard probe set – HP-S-X1S): • 1× probe stylus Ø 1.5 mm, 20 mm length • 1× probe stylus Ø 3 mm, 20 mm length • 1× probe stylus Ø 5 mm, 20 mm length • 1× probe stylus Ø 3 mm, 50 mm length • 1× probe stylus Ø 5 mm, 50 mm length • 1× probe stylus Ø 5 mm, 100 mm length • 1× wrench • 2× spring pins • 1× storage case Dimensions Machine depth 1277 mm

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2006, obratovalne ure: 47.000 h, laserska moč: 2.000 W, prebijalna sila: 76 t, teža obdelovanca (maks.): 120 kg, delovno območje: 2.500 mm, Oprema: hladilna enota, varnostna svetlobna zapora, Special equipment: + Thread forming function with thread former breakage control + MultiTool function + Marking/Quick beads function + Follow-up cylinder + Sensor for parts chute Standard equipment: - Rigid C-frame - Coordinate guide with integrated linear magazine - 21 positions for tools and clamping claws - 2 clamping claws - Drives: maintenance-free three-phase servo motors - Brush tables - Laser TCF1 (2000W) - HI-LAS high-pressure cutting - High-speed processing with SprintLas - Programmable cutting gas selection/pressure adjustment - Laser cutting head with 5'' lens - Quick-change cutting head device - APC capacitive height control - Lens monitoring sensors - Laser logbook function - Compact dust extractor - Rotatable tool holder - Automatic follow-up device with hold-down - Automatic parts chute for parts 300x500 mm - Automatic tool changer with 19 stations - 2 clamping claws - Good parts container - Punch spray lubrication - Second lubricant reservoir - Punch slug extraction - Chip bucket - Quick shutdown for hydraulics - External control panel - TFT touch color display 15'' - USB stick interface - 3.5'' floppy disk drive - Safety devices - RJ45 network connection - Network connectivity Lodpfx Aaswcq Hgjcehc - Detailed operating instructions - Remote diagnostics system

Stanje: rabljeno, Leto izdelave: 2007, x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm Control: Sinumerik 840 D Siemens Max. clearance between columns: 3,000 mm Max. passage height: 1,950 mm Max. distance spindle center to table: 1,800 mm Distance spindle nose to table: 1,350 / 1,500 mm Type P 8005020/00-4 Speed range - main spindle: max. 18,000 rpm Drive power - main spindle: 20 kW Max. torque: 48 Nm Tool holder: HSK-A63 DIN 69063 Spindle extension: 450 mm Tilting axis B: +110° / -10° Rotary axis C: +/- 200° Type P 8002320/00-4 Speed range - main spindle: 20 - 5,000 rpm Drive power - main spindle: 40 kW Max. torque: 1,100 Nm Tool holder: HSK-A100 DIN 69063 Spindle extension: 300 mm Tilting axis B: +110° / -10° Rotary axis C: +/- 200° Table clamping area: 4,000 x 2,200 mm (2x) Max. table load: 12 / 20 t Height above floor: 700 mm Number of T-slots: 11 + 19 T-slot width: 28H7 mm T-slot spacing: 200 mm Number of tool pockets: 327 positions Number of tool pockets HSK A63: 156 positions Number of tool pockets HSK A100: 171 positions Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 / 500 mm Max. tool weight HSK A63: 5.0 kg Max. tool diameter HSK A100: 315 mm Max. tool length HSK A100: 500 / 800 mm Max. tool weight HSK A100: 40.0 kg Feed rate X: max. 30,000 mm/min Feed rate Y/Z: max. 40,000 mm/min Feed rate B: 3,600 °/min Feed rate C: 2,160 °/min Acceleration X: max. 1.5 m/s² Acceleration Y/Z: max. 3.2 m/s² x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm b-axis +110° / -10° c-axis +/- 200° Total power requirement: 150 kVA Lsdpsvy Ihdjfx Aacjhc Required space approx. 25.0 x 12.0 x 7.0 m 5-axis portal large machining center DROOP + REIN - TFS 22 40 DT D40 P - Two milling heads - Approx. 4,000 operating hours - X-axis 10,000 mm (coupled) / 2x 5,000 mm (single table) - 3 simultaneous axes (X, Y, Z) - 2 positioning axes (B, C) - Tools upon agreement