Valjčni brusilnik

Ponar RUP 28x1000 RUP

Stanje: rabljeno, Leto izdelave: 1986, Grinding diameter: 350 mm Grinding length: 600 mm Center height: 175 mm Very well-maintained machine. The machine comes from a precision grinding workshop in the Black Forest. It can still be inspected under power at the seller’s site for a short time. Hsdpfx Ajv Tqqnobhoh In 2022, the machine underwent partial overhaul and maintenance at our facility, including geometry restoration according to the manufacturer’s protocol. Equipment: - 2-axis FAGOR digital readout - Sine bar - Tailstock with fine adjustment - Hydraulic tailstock - Face grinding attachment - Internal grinding attachment - Internal grinding spindle Fischer UJ70 - Paper band filter - Automatic cycle: roughing – finishing – spark out – return

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, obratovalne ure: 50 h, številka stroja/vozila: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3,100 kg Overall dimensions: 230 x 155 x 170 cm Installed power: 13 kVA Customs code: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Centre distance: 650 mm Grinding capacity (SpW+bs): 80 Travel: 700 mm LONGITUDINAL SLIDE Max. stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Feed rate: 50–5,500 mm/min Reversal delay: 0–6 sec Max. table swiveling angles: 12°/10°/8.5°/6° Hjdpfow T Sd Tjx Abhjh Pneumatic relief for table and workhead CROSS SLIDE Max. stroke: 300 mm Rapid traverse: 60 mm Plunge depth in diameter: 3.4 mm Feed rate 1: 0.012–6 mm/min Feed rate 2: 0.012–1.2 mm/min Feed per pulse: 0.001–0.05 mm GRINDING WHEELHEAD Left-hand wheel, external grinding: 400 x 80 x 127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s Spindle speed: 1,670 / 2,110 rpm Internal grinding attachment for belt-driven spindles, incl. drive unit: 1.5 kW WORKHEAD Swivel range: 0–90° Infinitely variable spindle speed: 30–1,000 rpm Internal taper: Morse 5 Clamping collets: W-25 Drive power: 0.55 kW Max. workpiece weight between centers: 130 kg Air grinding load capacity: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Precision adjustment for cylindricity correction: ±40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of generator over 630 mm: 0.003 mm Roundness for air grinding: 0.0003 mm CONNECTION VALUES Max. absorbed power: 13 kVA Max. permissible voltage fluctuation: -15% / +10% Max. permissible frequency fluctuation: ±3% Required compressed air pressure: 5 bar Technical specifications provided without obligation and subject to change. Errors and omissions excepted.

Stanje: rabljeno, Leto izdelave: 2006, 2006 Hurco VM1 Vertikalni obdelovalni center Leto izdelave: 2006 Hedpfx Abev Suwiohoh Tehnične specifikacije – Hurco VM1 VMC Splošni podatki Širina: 1800 mm Globina: 1900 mm Višina: 2600 mm Teža stroja: 2700 kg Glavni pogon Število vreten: 1 Območje vrtljajev vretena: 40–8000 min⁻¹ Moč motorja vretena: 11 kW Pomiki Premik X-osi: 660 mm Delovni pomik X-osi: 8 m/min Hitri pomik X-osi: 20 m/min Točnost X-osi: 0,005 mm Premik Y-osi: 350 mm Delovni pomik Y-osi: 8 m/min Hitri pomik Y-osi: 20 m/min Točnost Y-osi: 0,005 mm Premik Z-osi: 450 mm Delovni pomik Z-osi: 8 m/min Hitri pomik Z-osi: 20 m/min Točnost Z-osi: 0,005 mm Obdelovanec Maksimalna teža obdelovanca: 350 kg Delovna miza Zunanja dolžina: 762 mm Zunanja širina: 356 mm Dostava in postavitev na lokaciji sta na voljo za doplačilo – prosimo, povprašajte za ceno.

Stanje: novo, The RSM 500 A is a conventional cylindrical grinding machine from the grinding machinery category, distinguished by its robust construction and long, supportive guideways. Its heavy-duty machine base made from high-quality cast iron ensures maximum stability and precise grinding results. The swiveling table and finely adjustable hydraulic feed guarantee smooth operation, while large graduated dials on the X-axis handwheel facilitate precise infeed adjustments. This equipment is complemented by a standard position display with linear scales, enabling easy monitoring of actual values. Versatile applications such as internal and external cylindrical grinding as well as taper grinding are supported by the hydraulically adjustable workhead. Buyers receive extensive standard accessories, including an internal grinding device and a work lamp. Experience outstanding performance and precision with the RSM 500 A – contact us now to optimize your grinding projects! Hedencdx Nspfx Abhsh

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Offered for sale is an external cylindrical grinding machine EMAG Weiss WPG 7 – top-level external cylindrical grinding in a compact footprint. The footprint of the WPG 7 is only 1,800 x 2,400 mm. This machine is perfectly suited for machining small shafts or gears. The WPG 7 can be loaded manually or equipped with automated solutions such as chain conveyors and linear gantries. CONTROL SYSTEM Fanuc 0i Hedpjtlrkbjfx Abhjh TECHNICAL DATA Workpiece length: max. 250 mm Grinding diameter: max. 80 mm Centre height: 100 mm Centre distance: 380 mm Workpiece weight: max. 30 kg Grinding wheel diameter: max. 500 x 80 mm Price, delivery time, and machine configuration upon request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Control system: ELB PLC Grinding area: Length X 1000 mm Hjdpfx Abevwl Ipohsh Width Z 750 mm Height Y 400 mm Magnetic chuck 1000 x 700 mm Table load capacity (without magnetic plate): 1100 kg Longitudinal axis X: Table speed 2–26 m/min Maximum longitudinal stroke 1100 mm Vertical axis Y: Vertical stroke 400 mm Maximum feed speed 1200 mm/min Minimum vertical infeed 0.001 mm Cross axis Z: Maximum cross stroke 620 mm Maximum feed speed 2000 mm/min Minimum cross infeed 0.001 mm Grinding spindle: Taper 75 mm Drive 22 kW Speed range 1450 rpm Grinding wheel dimensions: 450 x 150 x 203.2 mm Machine footprint (without control panel) LxWxH: 3550 x 2750 x 3230 mm Total machine weight: 7300 kg

Stanje: dober (rabljeno), Distance between centers: 1000 mm Center height: 175 mm Grinding length: 500 mm Max. workpiece diameter: 300 mm Grinding wheel dimensions (OD x ID x width): Ø500 x Ø203 x 80/100 mm Internal taper: Morse 5 Grinding wheel motor power: 7.5 kW Total power: 17 kW Longitudinal carriage travel (X axis): 267 mm Cross carriage travel (Z axis): 650 mm Hsdpfott Rawsx Abhoh CNC brand: FANUC CNC model: 16-T Swivel range: +/- 8.5º Dimensions: 2600 mm x 2300 mm x 2100 mm Approx. weight: 4200 kg

Stanje: rabljeno, Technical Details: Swing diameter: 200 mm Centre distance: 450 mm Cross travel: 245 mm Longitudinal travel: 830 mm Table speed: 0.05–4.5 m/min, stepless Spindle speed: grinding spindle 1780, 2050 rpm Spindle speed: workpiece spindle 50–500 rpm Grinding wheel dimensions: 350x32x127 mm Table size: 2200x280 mm Table swivel range: 9° forwards / 10° backwards Total power requirement: 6.0 kW Machine weight approx.: 2.2 t Machine dimensions: 2.2x2.05x1.6 m Hodpfsu Ng Dgjx Abhjh UNIVERSAL CENTRE GRINDER without internal grinding attachment - For precision grinding of external (and internal) as well as tapered surfaces. - Infeed of grinding spindle headstock by hand or hydraulically - Table feed hydraulically infinitely variable - Grinding spindle swivels by 60° - Workpiece headstock swivels by 90°, with MK 4 mounting - Tailstock, MK 3 mounting Equipment: - Wheel dressing device - Coolant tank including pump and supply as per description.

Stanje: rabljeno, Leto izdelave: 1995, Funkcionalnost: nepreverjeno, Razdalja med centri: 650 mm Notranji / zunanji premer 2-osni SONY digitalni prikazovalnik Rezervoar za hladilno tekočino Hjdswu Tdfopfx Abhoh

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1315/451, Completely overhauled: Mechanical, geometry, hydraulic, and electrical components (checked and/or replaced) Grinding Wheelhead Disassembly, cleaning of components, replacement of worn or defective parts, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, adjustment. New paint. Workhead Disassembly, cleaning of components, replacement of worn or defective parts, motor overhaul, belt replacement. New spindle bearings. New paint. Tailstock Disassembled, inspected and overhauled Hydraulics Disassembly, motor inspection, replacement of hoses, worn or defective parts. Inspection of hydraulic block. X Axis Disassembly, replacement of worn parts such as O-rings, seals, segments, etc., overhaul of hydraulic piston, table grinding. Hsdpfx Abew U Ry Njhoh Z Axis Disassembly, table grinding, replacement of worn or defective parts, overhaul of hydraulic piston, new paint. Electrical Cabinet Complete inspection, replacement of various relays. Paintwork Colours: White RAL 9003 and Grey RAL 7011 Geometry as per manufacturer's protocol. Inspection and cleaning of various accessories Origin CH Voltage 380 / 50 / 3 Net weight approx. 2200 kg Customs tariff position 8460.2920 TECHNICAL SPECIFICATIONS Centres distance (nominal) 600 mm Maximum centres distance (with protruding headstock) 750 mm Centres height, standard 125 mm Centres height with interchangeable shoes for headstocks 175 => 250 mm Max. workpiece diameter (125 mm centres height) 250 mm Max. workpiece diameter with interchangeable shoes 350 => 500 mm Table swiveling each direction 10° Max. surface grinding length (max. width = 200 mm) 900 mm Table speed, infinitely variable hydraulically 0 - 6 m/min approx. Table reversal dwell time 0-5 s External grinding wheel, diameter – width – bore 400 x 50 x 127 mm Surface grinding wheel 250 x 13 x 76 mm Grinding wheel spindle speed 1500/1700/2200/3600 rpm Wheelhead swiveling 270° With indexing every 90° Vertical movement of wheelhead, centre height 125-350 mm Transversal travel of wheelhead 285 mm Hydraulic rapid feed and return stroke 40 mm Incremental feed of wheel by table reversal 0.001 - 0.03 mm/dia Continuous infeed for plunge grinding 0 - 0.9 mm/dia Micrometric infeed stop, per division 0.001 mm/dia Workhead swiveling 360° Workhead spindle speed, infinitely variable (normal/special), rpm 20-400/10-400 Internal taper of workhead/tailstock 5/3 Morse Wheelhead motor, approx. 4 HP All technical data are given without guarantee and subject to errors or omissions.