PIV Zavorni upor

PIV DC 540/625 Volt

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), Screw pump Manufacturer: Busch Model: Cobra DS 600 E Condition: very good Availability: from stock Nlodod Rafbepfx Anpeh

Stanje: dober (rabljeno), Hidravlična črpalka, oljna črpalka, zobniška črpalka, lamelna črpalka, hidravlični agregat, dvojna hidravlična črpalka - Dvojna hidravlična črpalka: iz brizgalnega stroja KHS Krauss Maffei KM 1000-5000A - Črpalka 1: Voith tip IPH 6/5-125/50 300 bar - Črpalka 2: Voith tip IPR/H 6/5-125/40 210/300 bar - Pogon: Loher 75 kW 1500 v/min - Posamezne komponente: filter/ventili glej slike Njdpfx Ajg Avqcenpslh - Dimenzije: 2285/800/H900 mm - Teža: 1132 kg

Stanje: rabljeno, Visokohitrostna stiskalnica Schuler PE4s 50/800 Proizvajalec: Schuler Nedpfxjgryc Nj Anpolh Tip: PE4s 50/800 61/21 600/3 Stiskalna sila: 50 t Dolžina: 800 mm Število hodov/min: 125–300 Hod batnice: 40 mm Naprava Kohler za navijanje materiala 500.1 M Dodatne izdelke – nove in rabljene – najdete v naši spletni trgovini! Stroški mednarodne pošiljanja na zahtevo!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, With a focus on optimized and energy-efficient drives in the vehicle industry, significantly higher demands are being placed on the components of the drive system. Greater power transmission and higher torque with simultaneously smaller dimensions are the main challenges. As a result of this development, the demand for cold-formed splines has increased. Nedpfjgtty Tjx Anpjlh With the Vertical Splines Press (VSP), Sack & Kiesselbach offers customers a solution that provides both technological and logistical advantages over conventional technologies (such as rolling or broaching). This comparatively compact and highly user-friendly press can be configured for both manual and fully automated operation. In addition to the splines press, customers can also obtain the appropriate tool system and corresponding process technology from a single source. 1 used Vertical Splines Press Manufacturer: Sack & Kiesselbach Model: VSP 50/30 Year of manufacture: 2015 Technical data: Press force: 500 kN Ram stroke: 450 mm Closing speed: 200 mm/s Pressing speed: 5.5 mm/s Opening speed: 120 mm/s Table dimensions: 500 x 400 mm Installation height: 1000 mm Distance between uprights: 530 mm Splines cylinder speed: 3–9.5 mm/s Dimensions Height: 2,900 mm Width: 3,100 mm Depth: 1,400 mm Drive power: 8 kW Special features: Digital travel measurement system Spline tool for internal toothing

Stanje: dober (rabljeno), Leto izdelave: 1986, obratovalne ure: 10.000 h, Press force: 30 tons (US) approx. 270 kN Table size: 762 x 533 mm = 30" x 21" Ram area: 800 x 300 mm Strokes per minute: 100...1400 rpm Fixed stroke: 25.4 mm = 1" Ram reinforcement: 44.5 mm = 1.75" Nodpfx Ajnl Snenpolh Features: * Hydraulic clutch * Roller feed Manufacturer: Sankyo Model: Variax V70 Strip width: max. 100 mm Only approx. 10,000 operating hours

Stanje: novo, 1 nova, univerzalna glava za rezanje, izvedena v robustnejši različici, za naknadno namestitev na konvencionalne, NC- ali CNC-obdelovalne stroje ali vrtalne stroje vseh vrst, sistem „HURON“, ročno nastavljiv v dveh ravninah, vsak kot je nastavljiv. Vretenčna glava ISO 40 Izstop cca. 360 mm D8ot3uy Nominalna moč pogona 10 KM maks. hitrost 1800 vrt/min. Teža glave za rezanje cca. 82 kg Nlodpfx Aobpmw Njnpoh Dodatna oprema / posebne značilnosti: • S prilagoditveno ploščo v robustnejši izvedbi z dodatnim poševno ozobljenim zobnikom • Ročno vpenjanje orodja • Glavno vreteno in vsi gredi ter priključki so izdelani iz legiranega jekla s kromom in nikljem, ki je utrjeno in kaljeno • 2 med seboj vrtljivi osi, kar omogoča nastavitev katerega koli kota! Sistem „HURON“ • Stožčasti priključki so brušeni po sistemu „KLINGELNBERG“ • Valjčna ležaja glavnega vretena so izdelana iz stožčastih, visoko natančnih valjčkov • 1 pogonski zobnik, poševno ozobljen • 1 vijak za vpenjanje orodja Dobavni rok: cca. 12–14 tednov po prejemu naročila Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Nemčija

Stanje: rabljeno, Frequency: 47–63 Hz Total power requirement: 18.5 kW Space requirement: approx. 0.52 x 0.28 x 0.25 m Nsded Ihdbepfx Anpjlh Item No.: 6SE6440-2UE31-8DA1 MICROMASTER 440 without filter, 3 AC 500–600V +10/-10%, 47–63 Hz, constant torque 18.5 kW, overload capacity 150% for 60 seconds, 200% for 3 seconds, quadratic torque 22 kW, 520 x 275 x 245 mm (H x W x D), protection class IP20, ambient temperature –10 to +50°C, without AOP/BOP.

Leto izdelave: 2001, stanje: rabljeno, številka stroja/vozila: 29, Machine number: 29 Year of manufacture: 2001 Maximum traction force: 63 kN Maximum stroke: 1000 mm Weight: approx. 7 tonnes (machine + control cabinet + coolant system) Broaching stations: 1 Nlsdpfx Anjdnk Ukopoh Cycle time: 28 sec. Cutting speed: 8 m/min Return speed: 16 m/min Shank diameter: 32 mm End piece diameter: 25 mm Dimensions (L x W x H of base machine): 4800 x 2800 x 3500 mm

Stanje: rabljeno, Leto izdelave: 1990, maks.: vlečna sila 25.000 kg Nlodpfjcm Eiwsx Anpjh maks.: dolžina orodja 3.520 mm maks.: hitrost rezanja 9,6 m/min prehodna širina: 520 mm Stroj je obdeloval ojnice in pokrove ojnic. Stroj je zasnovan za množično proizvodnjo (izhod: 400 kosov/uro)

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1994, obratovalne ure: 41.564 h, Funkcionalnost: nepreverjeno, (Pictures show current condition) Optional purchases: - Current condition = €12,500 Sold as-is, liability excluded – spare parts, service, and maintenance can be offered separately. - Overhauled condition = €13,500 Intensifier inspected 3-month warranty (excluding spare and wear parts) - Refurbished condition = €17,999 (Refurbished) 12-month warranty (excluding spare and wear parts) New pressure intensifier, new controller, new high-pressure pump; hydraulics cleaned and inspected. We offer a discount when concluding a maintenance or service contract! Nlsdeguqucepfx Anpsh Contact us for your customized offer!