2019 PIOVAN regulator temperature THW124-F

PIOVAN THW124-F

Leto izdelave: 2020, Stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Itsdpfx Asfzktzef Tob Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, ENGEL DUO 17060/2000 Injection Moulding Machine Year of manufacture: 2022 Integrated ENGEL Viper 60 Robot – RC300 TECHNICAL DATA: Injection Unit: - Screw diameter: 135 mm - Screw stroke: 610 mm - Injection volume: 8,731 cm³ - Shot weight (PS): 7,860 g - Screw speed: 125 rpm - Screw torque: 14,000 Nm - Max. screw torque (at reduced speed): 15,630 Nm - Plasticising rate (3-zone screw): 222.9 g/s - Plasticising rate (barrier screw): 279.2 g/s - Injection rate: 1,904 cm³/s - Plasticising pressure: 1,648 bar - Max. injection pressure: 2,000 bar - Nozzle stroke: 1,100 mm - Nozzle contact force: 210 kN - Material cylinder: L/D = 25 - Number of heating zones (incl. nozzle): 8 - Heating power: 88.5 kW Clamping Unit: - Clamping force: 20,000 kN - Minimum clamping force: 2,000 kN - Opening force with cushion: 1,600 kN - Opening stroke: 3,000 mm - Max. daylight between platens: 3,800 mm - Mould height: 800 – 1,800 mm - Tie bar spacing (H x V): 2,000 x 1,600 mm - Platen size (H x V): 2,700 x 2,430 mm - Max. mould weight (moving/fixed platen): 2 x 41,330 kg - Max. total mould weight: 62,000 kg - Dry cycle stroke (Euromap 6): 1,400 mm - Dry cycle time (Euromap 6): 5.5 s Ejector Unit: - Ejector stroke: 400 mm - Ejector force: 385 kN Drive and Cooling: - Installed power, main drives: 265 kW Ijdpsw Aw Taefx Af Tjtb - Oil tank capacity: 1,600 l - Max. oil cooling capacity (at 25°C): 43.2 kW - Cooling water consumption (at 25°C): 6.3 m³/h ENGEL Viper 60 – RC300 Robot (2022): - Z-axis stroke: 4,280 mm - X-axis stroke: 1,800 mm - Y-axis stroke: 2,600 mm - Robot fully integrated with the machine – operated via machine control panel The machine is in excellent technical condition – latest generation ENGEL DUO with very low operating hours. Suitable for demanding large-scale production (e.g. automotive, home appliances, technical). Still under power, test run possible. IMMEDIATELY AVAILABLE If interested, please contact us – we can provide more photos, a video of the machine in operation, technical documentation, and arrange a convenient viewing date.

Stanje: rabljeno, Leto izdelave: 1989, obratovalne ure: 74.900 h, vpenjalna sila: 850 kN, premer vijaka: 40 mm, skupna masa: 3.700 kg, Machine No. 145464 Year of manufacture: 1989 Iedpfer Hrqrex Af Tstb Machine weight: 3,700 kg (without oil filling) Clamping force: 850 kN Heating capacity: 8.31 kW Motor: 18.5 kW Total power: 27.2 kW Machine cycles: 7,112,306 Operating hours: 74,900 h Interfaces: Central computer, handling equipment, blow-off, diverter gate, core pull 1 hydraulic, mould temperature control 3 units. The machine comes with the following accessories, etc.: Complete 50-series thermoplast injection unit, selector valve, hydraulic infeed conveyor (height-adjustable, 3 levels) (integrated in control), external floppy disk drive (original Arburg), documentation and machine service reports from Arburg Service, machine setting CMD training materials (folder), electrical diagram, documents also available in digital form, oil filling (must be pumped into a container prior to transport; pump is available), electronic water manifold.

Leto izdelave: 2005, Stanje: pripravljen za uporabo (rabljen), Na voljo sta dva stroja BOY 55M, letnik 2005. Zapiralna sila: 550kN, premer polža: 38mm, vbrizgalni volumen: 196cm³, vbrizgalni tlak: 2000bar, dimenzije plošč: 565mm/540mm, razmak stebrov: 360mm/335mm. Min./maks. višina obdelovanca: 250mm/650mm, hod odpiranja: 400mm, maks. razmik plošč: 1050mm, hod izmetalca: 80mm, maks. teža orodja: 600kg. Dimenzije X/Y/Z: pribl. 3300mm/1200mm/2100mm, teža: pribl. 2300kg, delovne ure: 29664h, krmiljenje: Procan MD. Vključno z robotskim vmesnikom Euromap 12. Itodpfxetyaypo Af Tob

Stanje: dober (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 191523, vpenjalna sila: 490 kN, premer vijaka: 30 mm, -KOM 3086- Itsdsv Tb U Djpfx Af Tsb For sale is a used injection moulding machine. Technical data: Manufacturer: Engel Model: Victory 50 Designation: VC 200/50 Tech Clamping force: 50 t Year of manufacture: 2013 Machine no.: 191523 Screw diameter: 30 mm Tie-bar spacing: Tie-barless Locating ring diameter: 125 mm

Leto izdelave: 2026, Stanje: novo, številka stroja/vozila: 1234, Designed to collect mash before the packaging process. With the buffer option, the entire system can operate continuously and independently from the packaging machine, without interruption. - Capacity: 600 L - Material: Stainless steel, grade Wnr. 1.4301, AISI 304 - Weight: 80 kg - Equipped with a floating lid - Level indicator included Itjdpfxjiu Hy To Af Teb Dimensions: D – Diameter: 565 mm H – Overall height: 1095 mm h1 – Tank height without legs: 845 mm h2 – Leg height: 250 mm

Stanje: dober (rabljeno), Leto izdelave: 2007, obratovalne ure: 24.210 h, This injection moulding machine from Dr. Boy is located at Plastima Used Machinery in the machine storage facility. The machine is from 2007 and has relatively low operating hours for its age. – Brand: Dr. Boy – Model: 55M – Year of manufacture: 2007 – Screw diameter: 32 mm Itsdjtpf N Ujpfx Af Tjb – Shot volume: 96.5 cm³ – Clamping force: 55T – Operating hours: 24,210

Leto izdelave: 2014, Stanje: pripravljen za uporabo (rabljen), Maximum throughput: 370 kg/h, connected load: 0.25 kW, length: 950 mm, width: 950 mm, height: 1115 mm, weight: 75 kg, including automatic filling, frame structure, level control valve, inspection hatch, and documentation. Iodpjh Akm Tefx Af Tjtb

Stanje: rabljeno, Leto izdelave: 2019, Year: 2017 Control type: CC300 Operating hours: 20,000 h Storage location: MECA PLASTIC Availability: AVAILABLE Clamping force: 160 t Opening stroke: 460 mm Tie bar spacing: 520 mm x 520 mm Platen dimensions: 760 mm x 760 mm Mould height min/max: 250/600 mm Max distance between platens: 1060 mm Screw diameter: 35 mm Screw length: 20D Shot volume: 154 cm³ Max injection pressure: 2000 bar Motor power: 21 kW Heating power: 9.2 kW Clamping unit weight: 8.4 t Machine dimensions (L x W x H): 5.90 m x 1.70 m x 2.20 m Core pull: NO Itsdpfev I Uw Iex Af Tsb Robot interface: YES Bi-metal screw: YES

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Clamping force: 25 tons Itedjvl Skgepfx Af Tjb Tie bar spacing: 270 x 270 mm Max. opening: 275 mm Minimum mould height: 200 mm Platen size: 400 x 400 mm Screw diameter: 18 mm Injection volume: 20 cm³ Shot weight: 17 g Injection pressure: 2500 bar Operating hours: 38,035 h