Navpični obdelovalni center

Pinnacle SV116

The machine bed and column are made of cast iron, providing torsional rigidity. The SV-116 model features box ways on all axes; all box ways are hardened and ground. The main spindle and all axes are driven by HEIDENHAIN AC motors. All axes utilize high-precision, preloaded ball screws, and the machine is equipped with a full enclosure with three-sided cladding and centralized lubrication system with freely adjustable lubrication cycles.

Standard equipment includes:
* Control: HEIDENHAIN iTNC 530 smarT.NC
* Full enclosure with two sliding doors at the front and side windows in accordance with CE standards
* Two fluorescent tubes for optimal workspace illumination
* Mechanical counterweight for the ram
* 200-liter coolant system
* Chip flushing system throughout the work area
* Ammeter
* Electronic handwheel HR-410 with 2.5 m spiral cable
* Spindle air blow-off device
* Hinge-type belt chip conveyor including chip cart
* AC motors and drives by HEIDENHAIN DIGITAL
* Complete 4th axis preparation including cabling and connectors
* Coolant spray gun (workpiece rinsing)
* Compressed air gun with spiral hose
* Ethernet card for fast data transfer and network connectivity
* Controlled air nozzle at spindle head
* Oil cooling unit for maintaining constant spindle bearing temperature
* Internal coolant supply through the spindle (ICS) with a pressure of 20 bar
* Mobile auxiliary tank with paper band filter and Grundfos pumps, 600-liter capacity, easily positionable on rollers
* Full machine enclosure, including over the automatic tool changer
* Speed: 10,000 rpm
* Main spindle motor by HEIDENHAIN / INDRAMAT, Type: QAN 200 U 10 kW (16 kW) drive power
* Power at ED S1 (100%): 10 kW
* Power at ED S6 (40%): 16 kW

Technical data:
Table dimensions (mm): 1300 x 600
Max. workpiece weight: 850 kg*
Spindle nose to table surface distance: 100–710 mm
Spindle center to Z-axis guideway distance: 645 mm
Ijdpottvt Sefx Ah Djtn
Spindle taper: SK-40 DIN 69871
Inner diameter of front spindle bearing: 70 mm
Ball screws on all axes: Ø40 x 8 mm
Ball screws, backlash-free preloaded
Tool clamping force: 950 kg
Travel:
X: 1145 mm
Y: 615 mm
Z: 615 mm
Number of T-slots: 5
T-slot spacing: 100 mm
T-slot width: 18 mm
Center slot: 18H12
Spindle motor: Heidenhain QAN 200L DIGITAL
Axis drives: Heidenhain QSY 155B DIGITAL
Speed range: 60–10,000 rpm
Coolant pump output: 400 W
Central lubrication pump output: 75 W
Rapid traverse X and Y axes: 25 m/min
Rapid traverse Z axis: 24 m/min
Positioning accuracy and repeatability: +/- 0.005 mm

Tool changer:
* Type: Twin-arm gripper
* Number of tools: 24
* Max. tool diameter (full/adjacent empty): 75/125 mm
* Max. tool weight: 7 kg
* Max. tool length: 250 mm
* Tool change time: 1.8 s
* Chip-to-chip time: 5 s
* Tool holder taper: SK40 DIN 69871

General connection and dimensions:
Compressed air connection: 6 bar
Total connected load: 25 kVA
Rated voltage: 380 V, 50/60 Hz
Machine weight (min.): 7,500 kg
Machine dimensions (LxWxH): 3100 x 2200 x 2662 mm
Transport height incl. rollers: 2,450 mm
Further options available upon request:

QAN 200UH. Direct drive
* 12,000 rpm
* Power at 100% duty cycle = 10 kW
* Power at 40% duty cycle = 15 kW

RMP60/RMI radio probe for machine tools, equipped with FHSS radio transmission (Frequency Hopping Spread Spectrum).

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.