Stretchbander

PESTER PewoPack 450 SN + 450 E

Leto izdelave: 2025, stanje: novo, Avtomatski podajalnik palet je hrbtenica vaših avtomatizacijskih procesov. Napolnjen je lahko z do 10 euro paletami (1200x800 ali 1200x1200), kar odpravlja potrebo po ročnem pripravljanju posameznih palet, prihranek časa in zmanjšanje fizične obremenitve zaposlenih. Namesto tega enota palete izdaja s pritiskom na gumb ali s prednastavljenim algoritmom na motoriziran valjčni transporter, ki jih transportira za nadaljnjo obdelavo. Model PD-10 se lahko uporablja v povezavi z različnimi rešitvami za paletizacijo. Sprejme do 10 euro palet Gbedpfjhbg Uxsx Ahmon Polni se z viličarjem Zmanjšuje fizično obremenitev Povečuje učinkovitost

Leto izdelave: 2000, stanje: generalkompletno obnovljen (rabljeno), System for filling, cooling, and sealing suppository casting packs made of plastic. The line was completely overhauled mechanically and electronically in 2019 and is as good as new. Gbjdpfxefc I Has Ahmjn Before delivery, the system will be tested with suppositories supplied by CP-Citopac GmbH. For further technical details, please refer to the data sheet.

Leto izdelave: 2000, stanje: pripravljen za uporabo (rabljen), Ta proizvodna linija Manni za sendvič plošče je bila izdelana leta 2000. Gre za diskontinuirano linijo za sendvič plošče s poliuretanskim jedrom, ki vključuje postaje za profiliranje, injiciranje, stiskanje, rezanje, zlaganje in pakiranje. Glavni sestavni deli so stiskalnica Manni PMC 291 T, sistem za injiciranje poliuretana Cannon H100 RF2 in različne profilirne linije Tresam. Izkoristite priložnost za nakup te proizvodne linije Manni za sendvič plošče. Za več informacij o stroju nas kontaktirajte. Vrste uporabe: Drugi stroji za pločevino Gbsdpfx Ajx E Ef Njhmen

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 9.000 h, Funkcionalnost: popolnoma funkcionalen, TECHNICAL DETAILS Control system: Mitsubishi Meldas 700 Main Spindle Machining diameter: 20 mm Machining length without repositioning: 200 mm Spindle bore: 24 mm Spindle speed: 200 - 10,000 rpm Spindle indexing C-axis: 0.001° Motor power (built-in motor): 2.2 / 3.7 kW Gedpsxf Hqqofx Ahmobn Sub Spindle Machining diameter: 20 mm Spindle speed: 200 - 8,000 rpm Spindle indexing C-axis: 0.001° Motor power: 0.75 / 1.5 kW Driven Tools on Vertical Holder Speed: 200 - 4,500 rpm Motor power (AC servo motor): 1.0 kW Number of tools: 6 Tooling System Turning tools (12x12x130): 5 Tool holder / Cut-off tool (16x12x130): 1 Drilling tools (front side): min. 3 Drilling tools (rear side): 5 Tool holders, tailstock (diameter): 19.05 mm Tool holders, turning tools (shank cross-section): 12 mm Collets and Guide Bush Main/sub spindle collet: F25 (145E) Guide bush (Neukomm): T223 (22.001) Rapid Traverse All axes: 32 m/min Machine Specifications Footprint (without magazine) L/W/H: 2,430 x 1,085 x 1,770 mm Spindle height: 1,050 mm Machine weight: 2,150 kg Input power: 8 kVA EQUIPMENT - 6 turning tools (12 mm shank cross-section) - 3 driven tools for cross machining - 3 driven tools for face machining on the main spindle - 3 driven tools for face machining on the sub spindle - Main spindle with C-axis - Sub spindle with C-axis - 3x driven tools for rear side machining - Yellow warning light - Interior lighting - Workpiece conveyor belt - FMB Turbo 3-26 loading magazine - Option for long parts - Spindle flushing (Scherzinger pump)

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), Single-screw extruder WEBER NE5 1-30:D with 2 co-extruders WEBER ZE30 Year of manufacture: 2001 Output: approx. 200 kg/h Screw diameter: 50 mm Application: For processing PE, PP, or for producing three-layer pipes, or for pipe sheathing and stripe application The system was used for manufacturing heating pipes Condition: Very good Gjdehy Tp Dopfx Ahmjbn 2 x WEBER ZE30 co-extruders Screw diameter: 30 mm The three-layer pipe system is my property Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany

Stanje: dober (rabljeno), Board Sorting Line / Sorting System / Length Sorting Line Esterer Right Discharge 5 Sorting Bins Total Length 26 Meters 1st Bin: 2 Meters 2nd Bin: 3 Meters 3rd Bin: 4 Meters 4th Bin: 5 Meters 5th Bin: >5 Meters Good condition – immediately available Location: Germany, near Landau an der Isar Gbodpfx Ahsgw Scqomjn Please also see my other listings. I look forward to your inquiry.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, WIRE BELT BLAST MACHINE MANUFACTURER: RÖSLER Manufacturer: Rösler Model: RDGE 800-4 Year of Manufacture: 2004 Belt Width: 800 mm Pass-Through Height: 550 mm Turbine Wheels: 4 units with frequency inverter Filter System: Wet filter system Gbsdpov Idf Iofx Ahmjn Including several infeed and outfeed conveyor belts. Including control cabinet, complete documentation, etc. Excellent condition! The machine is currently dismantled! WIRE BELT BLAST MACHINE MANUFACTURER: RÖSLER Brand: Rösler Type: RDGE 800-4 Year: 2004 Belt Width: 800 mm Inlet Height: 550 mm Turbine Wheels: 4 units with frequency inverter Filter: Wet filter system Supplied with multiple infeed and outfeed conveying belts Includes main electrical panel, complete documentation Very good condition! Machine is currently dismantled Price: Loaded on truck Warranty: 6-month functional and operational warranty if commissioned by DECK Sarl. Spare parts availability guaranteed for the next 10 years OPTIONAL: Delivery to your facility Assembly / Commissioning / Training Supervision by certified erection engineer We also supply spare parts for Rösler, Schlick, Wheelabrator, Gietart and other shot blasting machines! We can offer spare parts for Rösler, shot blasting machines!

Leto izdelave: 1999, stanje: zelo dobro (rabljeno), TRIULZI-IG glass tilting table Hydraulic Equipped with steering castors The rollers lower to enable 360-degree movement of the glass (for sealing purposes). Length: 3600 mm, Working height: 2400 mm Good working condition Good overall condition As is Gsdpfx Asiy Dtbehmsbn Immediately available

Stanje: rabljeno, Leto izdelave: 2014, Maks. premer struženja: 160 mm Maks. višina struženja: 150 mm Maks. premer obdelovanca: 100 mm Maks. višina obdelovanca: 150 mm Maks. število vrtljajev: 6.000 min⁻¹ Pomik - X: 700 mm Pomik - Z: 375 mm C-os: 360° Gbjdsqvd Iuopfx Ahmen Krmiljenje: FANUC Vertikalni stružni stroj | EMAG - VL2 Opremljen s trakom za transport obdelovancev. Stroj je v zelo dobrem stanju. Upoštevajte, da so tehnični podatki prevzeti iz primerljivih strojev.

Leto izdelave: 2019, stanje: skoraj kot novo (rabljeno), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - As-new condition: barely used - Documentation available (both electronic and physical) - Includes pallet with spare parts Gedpfoiryyasx Ahmebn TECHNICAL SPECIFICATIONS Model: RWO 360/400-1150 Max. furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C under vacuum Control accuracy: ± 2 K Temperature uniformity: ± 6 K within the range of 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Furnace work chamber: 360 x 400 mm Loading capacity: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Final vacuum (cold, clean and dry furnace): < 5 * 10⁻⁵ mbar Footprint: 900 x 1900 x 3000 mm Total equipment weight approx.: 1500 kg Sound pressure level: < 70 dB No liability is assumed for the correctness, completeness, or currentness of the information provided.