Stroj za čiščenje delov PERO R1 / 414 EX, l. 2017, IntŠt 231417

Pero R1 / 414 - Ex 7992

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Oil Hydraulic Double Column Press 400 T with Sliding Table Press Design: Double column press Thermally neutral: 80 – 120 °C Number of operator sides: 1 side Forces Pressing force, max.: 4000 kN Stripping force, max.: 400 kN Pressure build-up time (closed tool, steel on steel): max. 4 sec. Dimensions: 3,800 mm length x 4,475 mm width Max. opening width: 800 mm Stroke: 800 mm Table height above floor: 1100 mm Height above floor (overall machine height): approx. 4300 mm Minimum hall height: 5500 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight Total weight of the press (without operating fluids and table plate): approx. 28 tons Press table Table size: 1500 x 1500 mm Speeds Fast closing: 100 mm/sec Pressing speed: 8 – 3 mm/sec Sound Pressure Sound pressure level (measured at 1.5 m height at the control panel, per DIN 45635-T16-KL3): max. 78 dB(A) Hydraulics Number of press/drive cylinders: 1 pc. Operating pressure, max.: 300 bar Pressure build-up time (pressing): 4 sec. Pressing stroke pressure accuracy: +/- 3 bar Main pump: BOSCHREXROTH axial piston pump, approx. 145 L/min Oil volume: HLP 46 MW approx. 1000 liters Ambient temperature, max.: 40°C Oil temperature, max.: 55°C Preheat temperature: °C Auxiliary pump: BOSCHREXROTH gear pump 10 L/min, pressure maintenance up to 300 sec. Electrical Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic connection main motor: 40 kW Sliding Table Press with 400 T Capacity Closing speed up to 100 mm/sec (adjustable via touchscreen) Opening speed up to 100 mm/sec (adjustable via touchscreen) Initial pressing speed 10 mm/sec (adjustable via touchscreen) Table plate size: 1500 x 1500 mm Ram size: approx. 1600 x 1500 mm Oil temperature monitoring: 55°C warning, 60°C shut-down Automatic lubrication (adjustable via touchscreen) Free positioning of the ram (adjustable via touchscreen) SICK/PILZ light barriers, 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram locks Bjdpfx Afjph Uk Nenjwi Oil circuit cooling (adjustable via touchscreen) Ejector in table, 20 T pressing force, 350 mm stroke Ejector moves externally with the table Table plate, precision milled, with DIN 22 T-slots Pressure adjustment from 60 T up to 400 T (adjustable via touchscreen) Travel limiter adjustable by pressure or position Setup, single stroke, and cycle operation (adjustable via touchscreen) Swiveling control panel on the cabinet Two-hand operation, with open button, manual/single stroke/cycle switch Assembly, commissioning, operator training at extra charge Control system by SIEMENS (S7 1200), including 9-inch touchscreen monitor. Remote maintenance unit SECOMEA - Ethernet included in scope of supply. Side of the press with two windows (1000 mm high, 800 mm wide) with double doors each. (Sliding table press, hydraulic press, double column press)

Stanje: dober (rabljeno), Roots blower Manufacturer: Leybold Model: RUVAC WAU 1001 Cat. no.: 11741 Bwjdpjb Rnfiefx Afnji Pumping speed: approx. 1000 m³/h Condition: Fully overhauled Warranty: 12 months Delivery time: ex stock

Stanje: novo, Leto izdelave: 2024, Tünel tipi parça yıkama makinesi; metal ve plastik parçalar için tasarlanmıştır. Otomotiv, gıda, metal işleme, sac, plastik kasa gibi farklı sektörlerde kullanılmaktadır. Çalışma Prensipleri İş parçası, bantlı konveyör aracılığıyla tünelin içerisine girer; konumlandırılmış nozullar, iş parçasının her bölümünü yıkar. İş parçası tünelden geçerken, basınçlı ve ısıtılmış su + kimyasal karışımı ile yıkanır. Bu yıkama işlemi sırasında yüzeydeki tüm yağ, talaş ve diğer endüstriyel kirleticiler temizlenir. Tünel yıkama makineleri, INTERSONİK mühendislik departmanı tarafından hem standart hem de uygulamaya özel olarak tasarlanır. Yıkama İşlem Akışı Yıkama, pasivasyon ve kurutma, Intersonik Proses Mühendisleri tarafından istenilen sonuçlara göre, çevre dostu Intersonik kimyasalları destekli olarak özel olarak tasarlanır. Bsded I Azvepfx Afnewi Çalışma Süreci ► Ön yıkama ► Ana yıkama ► Durulama ► Pasivasyon ► Kurutma Uygulama Alanları ► Otomotiv endüstrisi ► Askeri savunma sanayi ► Gıda sektörü ► Seri üretim ve bakım amaçlı tüm imalat endüstrisi ► Metal mobilya endüstrisi Konveyör, ihtiyaçlarınıza ve iş parçasına göre INTERSONİK tarafından özel olarak tasarlanıp imal edilir. Konveyör hızı ayarlanabilir. Otomatik sıvı dolumu standarttır. Elektrikli ısıtma standarttır; ısı eşanjörü ve brülörlü ısıtma seçenekleri mevcuttur. Tüm veriler dijital ekranlar aracılığıyla görülebilir ve kontrol edilebilir. PLC kontrolü opsiyoneldir. Tüm sıvı tankları, ısı kaybını önlemek için izole edilmiştir. Buhar toplama vakum pompası ve ünitesi standarttır. Diğer opsiyonlar ve detaylar için lütfen bizimle iletişime geçin. tünel yıkama, otomatik yıkama, otomotiv parça yıkama, metal yıkama, parça yıkama makinesi, yağ alma, sprey yıkama, basınçlı yıkama makinesi

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 001669, Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outer diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Decoiler with auxiliary drive and brake Fixed coil loading saddle + decoiler traversing device Included: High-Performance Precision Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine No.: 001669 Maximum pass-through width: 620 mm Number of straightening rolls: 9 Straightening roll diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rolls are multi-point supported against deflection All rolls driven via distribution gearbox and cardan shafts. Used, as-is ex stock, immediately available. Bodpfx Afehigmbsnjwi Overhaul available on request. Delivery time by arrangement. Further data available shortly or on request.

Stanje: generalkompletno obnovljen (rabljeno), Edwards GV250, after complete overhaul: - in absolutely like-new condition - inspected according to manufacturer specifications, ensuring all clearances and dimensions are within tolerance Bwjdpfsfq Rgisx Afnoi - fitted with new wear parts - available at short notice - includes one-year warranty

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, This degreasing system operates under vacuum (pressure swing process) using modified alcohol or hydrocarbon. (New system) 12 months warranty Immediately available from St. Gallen Featuring vacuum pressure swing process Plant process: spray, immersion, ultrasonic, and vapor degreasing including vacuum drying. Technical Data: - Ultrasonic: 2 × 1000 W – 25 kHz - Double fine filter - Chamber door made of armored glass - 2-tank system, filling volume 400L - Dual distillation, residual distillation - Automatic oil discharge - 3-stage water separation - Electropolished chamber for fine cleaning - Screw vacuum pump (latest generation) - Loading trolley Bwodpoqy H H Dsfx Afnei - 2 washing baskets, mesh width 7mm and 12mm - 12" touch panel - Prepared for automatic loading Maximum basket size (480 x 320 x 200 h mm) Maximum loading weight 100 kg Plant dimensions 2400 x 2400 x 3300 h mm Plant weight (basic configuration) 2500 kg Color scheme RAL 9003 (white) RAL 7021 (black)

Stanje: novo, Leto izdelave: 2025, Tlačna peskalna kabina DSK 11.11.30. Peskalni prostor: širina 1050 mm, globina 1050 mm, višina 955 mm. 1 TÜV-preizkušen tlačni rezervoar 30 l s stožčastim iztočnim lijakom. 1 ventil za doziranje peskalnega sredstva s pnevmatskim uravnavanjem količine. 1 vgrajen zapiralni stožec z vodilno cevjo. 1 priključek za stisnjen zrak s pnevmatskim zapornim ventilom in iztokom za krmilni zrak. 1 regulator tlaka za nastavitev peskalnega tlaka. 1 peskalna cev DN19. 1 ročnik z bor-karbidno Venturi šobo 8 mm. 1 par peskalnih rokavic. Električno nastavljiva višina kabine za ergonomičen položaj telesa. Shranjevanje višinskih položajev v spominu za 3 nastavitve. Filter za odpraševanje 2000 m³/h 2,2 kW. Bodpfx Afoga Ehbsnewi

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 3.000 h, Funkcionalnost: popolnoma funkcionalen, All further information can be found in the attachment. Machine complete with high-pressure system and bar feeder Bwsdpsyacvyjfx Afnsi Hardly used; Decommissioned from high-end medical technology production Original purchase cost for machine + full-option peripherals: €382,036.86 (all original invoices available) Technical Data SV-20R Total number of axes: 12 Max. rapid traverse speed: 30 m/min Weight: 4,150 kg Coolant tank capacity: 220 liters Dimensions (L x W x H): approx. 2,730 x 1,350 x 1,865 mm Main Side Number of axes: 6 Main spindle axes (spindle headstock): Z1 / C1 Linear slide axes: X1 / Y1 Turret axes: B3 / X3 / Y3 / Z3 B-axis on turret: freely programmable Max. machining diameter: 20 mm / 23 mm (option) Max. spindle stock stroke (Swiss-type / short turning): 205 mm / 50 mm Max. main spindle drive power: 5.5 kW Max. main spindle speed: 10,000 rpm Linear Slide Tools Turning tools: 7 pcs (□ 12 mm) Cross-machining tools: 5 pcs (ER16) Max. drive power for cross machining: 2.2 kW Max. speed for cross machining: 8,000 rpm Turret Tools Number of tool stations: 8 (all driven) B-axis: 4 stations Max. drive power for cross machining: 4.0 kW Max. speed for cross machining: 5,750 rpm Rear Side Number of axes: 4 Sub-spindle axes: X2 / Z2 / C2 Height axis for back machining: Y2 Max. pick-off diameter: 20 mm / 23 mm (option) Max. sub-spindle drive power: 3.7 kW Max. sub-spindle speed: 8,000 rpm Back Machining Tools Tool stations: 8 (all driven) Max. speed for back machining: 8,000 rpm Standard Equipment FANUC 31i-B5 control with handwheel C-axis control on main and sub-spindle Synchronously driven guide bushing unit 7-position turning tool holder on linear slide 5 + alpha driven tools for cross machining on linear slide 8 + alpha tools for turning, drilling, and cross machining on turret 4 turret stations (programmable) for B-axis machining 8 + alpha tools incl. drill holders for back machining with drive Sub-spindle for back machining Air blow device for sub-spindle Parts catcher tray Pneumatic system with maintenance unit Part ejection control for sub-spindle Workpiece conveyor for discharging parts Central lubrication Separate coolant tank with level and flow monitoring Interface for bar feeder magazine Leveling pads and adjusting screws

Stanje: generalkompletno obnovljen (rabljeno), The fully overhauled vacuum pump is available from stock and ready for immediate use. We recommend installation to be carried out exclusively by trained personnel. Adaptation material is available upon request. Oil filling: M-VAC 100 Technical specifications: Bwsdpfxjq S N Iie Afnji 50Hz / 5.5 kW / 11.5/6.6 A Final pressure with open gas ballast: 0.35 mbar Final pressure with closed gas ballast: 0.25 mbar Subject to prior sale! This offer applies only to customers within Germany and European countries!

Stanje: skoraj kot novo (rabljeno), Rotary vane vacuum pump in oil bath. Available in stock. Pump fully overhauled. Comes with warranty. Nominal flow rate: 300 m³/h Bwodpfx Afjftzzgonoi Ultimate vacuum: 0.1 mbar abs. For any questions, please contact us.