Pralni stroj

PERO Pero 2600

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), Glavni pogon Število vretenc: 2 Območje hitrosti vretena: 6000 Število osi: 6 Gibi Pomik Y-osi: ±31 mm Hitri pomik Y-osi: 6 m/min Pomik B-osi: 525 mm Hitri pomik B-osi: 40 m/min Hitri pomik C-osi: 600 vrt/min Ta 6-osni NAKAMURA WT-100 je bil izdelan leta 2019 in ima dvoje vreten s hitrostjo 6.000 vrt/min ter močjo motorja 11/7,5 kW vsakega. Ima prebojno sposobnost palic do Ø42 mm ter maksimalni premer struženja Ø190 mm. Stroj vključuje dodekagonalni revolverski nosilec z 24 pozicijami in omogoča hitre pomike do 40 m/min. Če iščete kakovostne stružne zmogljivosti, upoštevajte naš stroj NAKAMURA WT-100. Za več informacij nas kontaktirajte. Vrste uporabe Struženje Hfsdpfsx D Rqxjx Adrsh

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen,

Stanje: novo, Leto izdelave: 2023, Extraction capacity at nozzle* (filter unit): 2600 m³/h (free blowing) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz, 3Ph+PE Noise level*: 65 dB(A) Dimensions (L/W/H in mm): L 9755 / W 508 / H 545 Colour: RAL 7035 Weight: 90 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter configuration Special voltage or special colour available on request OPTIONAL: With pre-filter package Field of application: Extraction of oil mist, emulsion mist (for emulsions with higher oil content) and smoke, suitable for small to very large machine workspaces | Oil mist separator Your advantages with the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC (digital filter control) optional - Electronically controlled EC fan as standard - Adjustable speed and air flow - Available as simplex (single-stage) or duplex (two-stage) - Wide range of air flow capacities available - Adaptable to pollutant load and required air flow - Extensive range of installation and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining processes involving pure oil and for separating oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already optionally digitalised and can, for example, be controlled via laptop. The ELBARON® range comprises 18 device variants and can be perfectly tailored in size and capacity to your specific application. ELBARON® units impress with long service life and absolute operational reliability. Our electrostatic filter cells are dimensioned to ensure, from an economic perspective, optimum filtration efficiencies, long service lives, and trouble-free operation. Hfodpfxjh Rdxns Adrjh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, 2-osni CNC stružnica MAZAK QTN 100II Mazatrol Matrix Vpenjalna glava za puše Prehod vretena 45mm Dolžina struženja 310mm Premer struženja 280mm X-190mm Z-330mm Vreteno max 6000 vrt/min Glava z 12 pozicijami -Orodna sonda -Konjiček -Lovilnik kosov Hfsdpfxoyvzwvj Adrjh -Vmesnik za podajalnik palic Z napravo je: -Transporter odrezkov Mayfran z zbiralnikom in črpalko za hladilno tekočino -Dokumentacija

Stanje: novo, Leto izdelave: 2023, Avtomatski stružni stroj s pomično glavo K'MX 920 CLEVER je zasnovan za obdelavo kompleksnih obdelovancev do premera Ø 20 mm. Stružnica je serijsko opremljena z dvema elektrovretenoma, vsakim z največjo hitrostjo 12.000 min⁻¹. S svojimi devetimi osmi, kombinirano enoto (comb) + revolversko glavo na treh oseh ter neodvisno končno enoto, je ta stroj sposoben istočasne uporabe štirih orodij v materialu, kar omogoča optimiziran cikel obdelave. 9 linearnih osi 1 neodvisno regalno mesto z 10 pozicijami Hfsdpfx Adsk Dz Dijroh Prerez zunanjih orodij 12 x 12 mm Revolverska glava s 12 postajami

Stanje: rabljeno, Leto izdelave: 2022, Turning diameter over bed: 254 mm Spindle bore: 20 mm Turning length: 120 mm Control: TX8i-s Total power requirement: 40 kW Machine weight approx.: 5 t Swiss-type automatic lathe TRAUB TNL 20 - 9 Year of manufacture: 2022 Control: TX8i-s (with Polyform / Helical / 19" multitouch with gesture control) Switchable operation: use as short or long turning machine Main spindle D20 (with 10,000 rpm) with C-axis Sub-spindle D20 with X/Z/C-axis Upper tool carrier X/Y/Z/H/B-axis with 8 tool stations Lower tool carrier X/Y/Z/H-axis with 8 tool stations Back working attachment with 4 tool positions Coolant mist extraction and filtration system Automatic CO2 extinguishing system Precision package Tool breakage detection (upper tool carrier) Tool breakage detection (lower tool carrier) Hinged belt chip conveyor Coolant system with 20 to 80 bar pump Bar feeder FMB Turbo 2-20 Shifting device for bar feeder Portal workpiece removal unit Workpiece conveyor belt Linear axes 1) X1 Upper turret 2) V1 Upper turret 3) X2 Lower turret 4) Z2 Lower turret 5) Z1 Sub-spindle 6) X4 Backworking unit 7) Z4 Backworking unit Rotary axes 8) C1 Sub-spindle 9) C2 Main spindle Swivel axes 10) B Upper turret carrier 11) H1 Upper turret 12) H2 Lower turret Workpiece removal unit 13) Z5 Lateral movement 14) X5 Rotary movement Max. bar capacity mm: 20 Max. Z travel long/short turning mm: 205 / 80 Max. spindle speed rpm: 10,000 Drive power 100%/40% ED kW: 3.0 / 5.5 Torque 100%/40% ED Nm: 5.73 / 10.5 / max. 17.2 C-axis resolution degrees: 0.001 Max. rapid traverse Z m/min: 20 Tool stations quantity: 8 Driven tools quantity: 8 Max. speed rpm: 12,000 / 8,000 Hsdpfxoy Nfdtj Adrsfh Holder diameter mm: 45 Drive power 100%/40% ED kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 / 165 Slide travel Y mm: ±25.4 Slide travel Z mm: 254 / 567.5 Rapid traverse X / Y / Z m/min: 20 / 20 / 40 B-axis swivel angle degrees: 105 Lower turret Tool stations quantity: 8 Driven tools quantity: 8 Max. speed rpm: 12,000 Holder diameter mm: 45 Drive power 100%/40% ED kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 Slide travel Y mm: ±25.4 Slide travel Z mm: 155 Rapid traverse X / Y / Z m/min: 20 / 20 / 40 Backworking attachment Tool stations quantity: 4 Slide travel X / Y / Z mm: 120 / ±25.4 / 155 Holder diameter mm: 25 Sub-spindle Max. spindle bore mm: 20 Max. speed rpm: 10,000 Drive power 100%/40% ED kW: 3.0 / 5.5 Torque 100%/40% ED Nm: 5.73 / 10.5 / max. 17.2 Slide travel X mm: 235.5 Slide travel Z mm: 258 C-axis resolution degrees: 0.001 Rapid traverse X / Z m/min: 20 / 40 Coolant system basic unit Pump pressure bar: 3 / 8 Tank capacity l: 250 Flow rate at 3 / 8 bar l/min: 80 / 120 Filtration fineness μm: 200

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Keyence VHX-6000 – High-Performance Digital Microscope for Industrial Applications, Research, and Quality Assurance. Condition: Used, in very good condition, fully functional. Non-smoking environment, no damage. ✅ Technical Data: Magnification: 0.1× to 5,000× (current configuration up to 2,500×) Image resolution: up to 4,800 × 3,600 pixels Sensor: 1/1.8-inch CMOS Frame rate: up to 50 fps Depth of field: High depth of field even in live view Measurement functions: 2D and 3D measurements (angle, area, volume, roughness) Motorized axes: X-Y motorized stage (100 × 100 mm), Z-axis for 3D topography Illumination: Multi-lighting function, LED light source Monitor: 23" IPS color display, Full HD Software: License-free measurement and analysis software Power supply: 100–240 V AC, 50/60 Hz Weight: Control unit approx. 12.5 kg, camera unit approx. 1.2 kg [gebrauchtm...schinen.de], [keyence.de], [forbiomit....rostock.de] ✅ Features: Fully automatic imaging and measurement Observation from various angles without sample manipulation Creation of 3D images and surface scans Hfjdpsxtbpdjfx Adrjh Ideal for quality control, material analysis, R&D 📦 Scope of Delivery: Keyence VHX-6000 control unit Camera unit 23" monitor Motorized X-Y stage Objectives (e.g. VH-Z20T, VH-Z250T) Power supply and cables Original software 🚚 Shipping & Collection: Collection by arrangement

Stanje: rabljeno, Leto izdelave: 1991, Turning diameter: 42 mm Turning length: 250 mm Control system Total power requirement: kW Machine weight approx.: t Space requirement approx.: m GILDEMEISTER Universal 8-axis CNC lathe with bar feeder Model: GAC 42 Year of manufacture: 1991 Serial No.: 5.1096 Bar diameter: 42 mm Chuck diameter: 140 mm Spindle bore: 56 mm Spindle speeds (485 Nm max.): 71 – 6,300 rpm The machine is equipped with: - 2 units of 2-axis side cross slides - 2 units of 1-axis side cutoff slides - 1 unit of 2-axis turret slide Turret slide traverse (X5/Z5): 40 / 274 mm Feed / rapid traverse: 5 / 15 m/min Feed force transverse / longitudinal: 600 / 1120 daN Cross slide traverse (X3/Z3, X4/Z4): 70 / 164 mm Feed / rapid traverse: 5 / 8 m/min Cutoff slide traverse (X1, X2): 70 mm Feed / rapid traverse: 5 / 8 m/min Spindle drive: 18 kW Overall drive: approx. 25 kVA - 380 V - 50 Hz Weight: 4,500 kg Accessories / Special Equipment: - GILDEMEISTER 8-axis CNC path control EPL 2 with color display, electronic handwheel, and all standard options: graphics, cycles, subroutines, parallel programming, etc. - 4 CNC side slides (2 with traverse/longitudinal axes, 2 with traverse axis), equipped with presettable quick-change system, tool shank 20 mm (square) - Tool turret with 8 VDI 30 stations, 4 of which are driven for drilling, milling, tapping with powered tools - Rotating pick-off device (chuck diameter 80 mm) for rear-side machining, using a linear tool carrier mounted on the right bed side (max. 3 tools) - Hydraulic hollow clamping device with collet chuck - SAMECA hydrostatic bar feeder MONOSAM 45 - 2-circuit coolant system, BMF chip conveyor, lockable sliding door, various driven tool holders, operating manual, miscellaneous accessories Hjdpfxot Hwz Aj Adrofh Thanks to the combination of a powered tool turret, rear-side machining, and 4 CNC side slides, this machine offers outstanding flexibility! Condition: Good to very good – demonstration ready Delivery: Ex stock – as inspected Payment: Net cash – upon receipt of invoice We look forward to receiving your order. Further conventional and CNC lathes available from stock – please inquire for details.

Leto izdelave: 2006, stanje: rabljeno, Torque assembly station, torque module, assembly fixture, torque screwdriver, torque wrench, torque screwdriver, riveting gun, rivet gun, blind rivet gun, - Drive: Torque module for Hilok assembly - Torque: adjustable via touch screen - Number of pressing cylinders: 1 piece - Number of screw drives: 1 piece - Working platform: 800 x 500 mm - Travel distances: Y 400 mm, X 955 mm - Dimensions: 1555/1470/H2110 mm Hsdpefw Rwmsfx Adrofh - Weight: 794 kg