Diferencialni toplotni kalorimeter

Perkin Elmer DSC 8000, N5340524

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, obratovalne ure: 250 h, In our possession since 2021 for customer prints, product demonstrations, and trade show appearances. Fully operational, supplied by IGO3D, a Desktop Metal partner. The machine can be viewed in Hannover (remote video calls possible upon request). Office-friendly 3D metal printing in just 2 steps: Print. Sinter. The Desktop Metal Studio System 2 printer is designed from the ground up for easy installation and use. Its process is similar to the safest and most widespread 3D printing method, Fused Filament Fabrication (FFF). Unlike laser-based systems that selectively melt metal powder, the Studio System 2 extrudes bound metal rods, eliminating the complex requirements associated with metal 3D printing and enabling new features like gyroid infill for lightweight strength. Technology - Printing technology: Bound Metal Deposition - Supported technology: Separable supports - Interface technology: Ceramic release layer Performance - Layer height (green state): 50–150 µm (high-resolution printhead) / 150–300 µm (standard-resolution printhead) - Max build weight (green state): 6.5 kg Dimensions - External dimensions: 948 x 823 x 529 mm - Weight: 97 kg - Build chamber: Heated - Extruder assembly: Dual quick-swap printheads - Build area: 300 x 200 x 200 mm - Build plate: Heated up to 70°C / vacuum-enabled bed - Build sheets: Polypropylene, removable - Nozzle diameter (build material): 0.40 mm (standard resolution) / 0.25 mm (high resolution) - Power requirements: 100–130 VAC, 50/60 Hz, 15 A, single phase / 200–240 VAC, 50/60 Hz, 10 A, single phase - Onboard control: 7-inch touchscreen display - Chamber view: In-chamber build plate camera Guedsm Rgzaopfx Afwea Media - Media hold/reload: Hot-swappable, push-to-release, user-refillable cartridges - Build media: Bound metal rods (metal powder + polymer binder) - Interface media: Bound ceramic rods Platform - Network connectivity: Wireless and Ethernet - Software: Fabricate Cloud (optional local licenses available) - Supported file types: STL, IGES, JT, STEP, VDA-FS, U3D, VRML, and native files (SolidWorks, ProE, etc.)

Stanje: zelo dobro (rabljeno), Memmert Model: UFP 800 Standard Equipment Features - Electronic fuzzy-supported PID process controller with continuous power adjustment and a time-saving self-diagnostic system for quick fault detection (see chapter "Error Messages") - Language selection - Alphanumeric text display - Internal protocol memory with 1024 kB for storing actual temperature, set temperature, air turbine, air flap, and error conditions with timestamp - Device control and logging of actual values to MEMoryCard XL - Program sequence controller for up to 40 ramp segments - Adjustable air turbine in recirculating air cabinets (adjustable in 10% increments) - Servo-motor controlled air flap (adjustable in 10% increments) for recirculating or fresh air operation - Integrated weekly timer with group function (e.g., all working days) - Retractable push/turn control knob for easy operation - Visual alarm indicator - Built-in buzzer as alarm for limit violations, as acoustic signal for program end, and as input confirmation (key click) - Digital monitoring controller for over-temperature, under-temperature, and automatic set point tracking (ASF) - Mechanical temperature limiter (TB protection class 1) - Monitoring relay for heater shutdown in case of fault - Two separate PT100 temperature sensors DIN Class A, 4-wire design for control and monitoring - Convenient integrated 3-point temperature calibration - Temperature-dependent control chamber and door ventilation Guedpfx Afoymm Erewoa - Parallel printer interface (PCL3 compatible) - Serial RS-232C interface for computer-assisted temperature programs and for reading out the controller’s internal protocol memory Technical Data: - Interior: Made of rust-free stainless steel, highly stable and easy to clean due to deep-drawn ribbing. - Housing (outer body): Textured stainless steel; rear panel made of hot-dip galvanized steel sheet - UFP 800 mobile and lockable on wheels - External dimensions: Width 1190 mm, Depth 750 mm, Height 1620 mm - Internal dimensions: Width 1040 mm, Depth 600 mm, Height 1200 mm - Volume approx. 749 liters - Weight approx. 170 kg - Power supply: 3N~ 400 V 50/60 Hz - Power consumption approx. 4800 W, 7A - Condition: Used - Scope of delivery: (see images) (Technical data and details are subject to change and error!) If you have further questions, we will gladly answer them by phone.

Stanje: zelo dobro (rabljeno), Type: UF 450plus Air circulation: forced convection Temperature Temperature range: +20 °C to +300 °C Working range: at least +10 °C above ambient temperature Setting accuracy: - up to 99.9 °C: 0.1 °C - from 100 °C: 0.5 °C Temperature sensors: 2× Pt100 (DIN Class A, 4-wire) Chamber and Capacity Volume: 449 liters Interior dimensions (W × H × D): 1040 × 720 × 600 mm Max. number of shelves: 8 Load per shelf: 30 kg Maximum total load: 300 kg Chamber: stainless steel, all-around heating External Dimensions and Weight External dimensions (W × H × D): approx. 1224 × 1247 × 784 mm Net weight: approx. 160 kg Gross weight: approx. 185 kg Gedpoyzzm Isfx Afwsua Electrical Data Voltage: 400 V, 3-phase Power: approx. 5800 W Control and Regulation Controller: ControlCOCKPIT TwinDISPLAY Control unit: digital PID microprocessor Timer: 1 minute to 99 days Functions: SetpointWAIT, HeatBALANCE, 3-point temperature calibration Adjustable parameters: temperature, fan speed, exhaust air flap, time programs Ventilation Recirculated air: adjustable in 10% increments Fresh air: electronically adjustable Exhaust air: with throttle valve Communication Interfaces: Ethernet, USB Software: AtmoCONTROL Safety Temperature limiter (TB), Protection class 1 Selectable temperature monitor/limiter (TWW/TWB) ASF system for over- and undertemperature monitoring Equipment Stainless steel door with 2-point locking Stainless steel housing Low-noise air turbine Rear side with 2 feed-throughs approx. 12 cm diameter each Condition: used Scope of delivery: (See image) (Technical data subject to change and errors excepted!) If you have further questions, we will be happy to answer them by phone. For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or obtaining information directly from the manufacturer.

Stanje: pripravljen za uporabo (rabljen), Memmert ULP 600 four universel Température nominale : 220 °C Dimensions intérieures : 800 x 500 mm x 640 mm (L x P x H) Dimensions extérieures : 1200 mm x 750 mm x 1600 mm (L x P x H) Sans chariot : 950 mm x 650 mm x 920 mm (L x l x H) Avec chariot : 1000 mm x 660 mm x 1750 mm (L x l x H) Poids : env. 175 kg Vous pouvez volontiers venir pour une visite. Nous pouvons également organiser un transport économique pour vous ! Vous recevrez une facture en bonne et due forme. Pour les clients étrangers, une facture hors taxes peut être établie sous réserve d'un numéro de TVA intracommunautaire valide. Sous réserve de vente préalable. Visitez notre boutique et découvrez également nos autres offres. Gsdpfjxxlawsx Afwsua Les noms de sociétés et marques cités sont la propriété de leurs titulaires respectifs et servent uniquement à l’identification et à la description des produits. Des écarts par rapport aux données techniques ainsi que des erreurs dans la description de l'article peuvent survenir et restent réservés.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, skupna masa: 97 kg, potovalna razdalja osi X: 300 mm, pomik osi Y: 200 mm, pomik po osi Z: 200 mm, število osi: 3, This 3-axis DESKTOP METAL Metal Studio 2 was manufactured in 2021. It uses Bound Metal Deposition technology and features a build volume of 300 x 200 x 200 mm. The machine supports various materials, including 316L and H13 tool steel, and operates with a dual extruder system. If you are looking for high-quality 3D printing capabilities for metal, you should consider the DESKTOP METAL Metal Studio 2 machine we have for sale. Contact us for further details. • Technology: Bound Metal Deposition (BMD) • Process: 2 steps (printing and sintering – no debinder required) Gjdpfjyuyz Nex Afwjua • Build volume: 300 x 200 x 200 mm • Layer height: 50 µm to 250 µm • Build plate: Heated up to 120°C (vacuum bonded) • Extruders: Dual (metal and ceramic carrier) • Interface to carrier: Ceramic release layer (manual separation) • Materials: 316L, 17-4 PH, 4140, H13 tool steel, copper • Software: Fabricate (automatic scaling and sintering profiles) • Connectivity: WiFi/Ethernet Additional equipment: • Furnace: Maximum temperature 1400°C; Atmosphere: Partial pressure of syngas (Ar/H2); Sintering cycle: 16–24 hours