Škarje za profilno jeklo

PEDDINGAUS 229R200

Stanje: rabljeno, Leto izdelave: 2007, Pressure: 100 t Stroke: 500 mm Table surface: 900 x 600 mm Rapid traverse: 22 mm/s Dkedpfxevprv Rs Ammen Stroke speed: 2 mm/s Ram surface: 700 x 350 mm Total power requirement: 2.2 kW Machine weight: approx. 1.6 t Required space: approx. 1.9 x 0.85 x 2.3 m Hydraulic workshop press This machine is the Italian make SICMI, which was distributed by Knuth.

Leto izdelave: 1999, stanje: zelo dobro (rabljeno), TRIULZI-IG glass tilting table Hydraulic Equipped with steering castors The rollers lower to enable 360-degree movement of the glass (for sealing purposes). Length: 3600 mm, Working height: 2400 mm Good working condition Good overall condition Dsdpfx Amjiy Dtbjmjkn As is Immediately available

Stanje: rabljeno, Leto izdelave: 1983, Grinding length: 8,400 mm Grinding width: 1,450 mm Workpiece height: 1,250 mm Clamping surface: 8,000 x 1,250 mm Table height above floor: 920 mm Distance between columns: 1,470 mm Max. workpiece weight: 59,700 kg Machine weight approx.: 59.7 t Space requirement approx.: 22 x 5 x 5 m Adjustment ranges: - Crossbeam, vertical: 1,250 mm - Grinding support, horizontal: 3,100 mm Adjustment speeds: - Machine table (X-axis): steplessly adjustable 1–45 m/min table creep feed speed: 5 m/min - Grinding support, horizontal (Y-axis): rapid traverse: 3,000 mm/min feed, incremental: 0.001–0.099 mm feed, continuous: 100–3,000 mm/min creep feed: 18+1 mm/min tip advance: 0.001–0.019 mm - Crossbeam (W-axis): rapid traverse: 410 mm/min Dksdpfxevr Hgvs Ammon Table drive: - Oil gear, type Iv4 - Cylinder Ø: 185 mm - Piston rod Ø: 130 mm - Drive motor: 22 kW

Leto izdelave: 1989, stanje: rabljeno, Control system: Heidenhain TNC 355 Dkjdpfx Ajhd Rm Ujmmen Table size: 900 x 465 mm Travel paths: X - 600 mm, Y - 400 mm, Z - 420 mm Tool holder: SK 40 Quill stroke: 75 mm Spindle speed range: 20–4000 rpm Feed rates: 1–5000 mm/min

Stanje: rabljeno, Leto izdelave: 2003, x-axis travel: 800 mm y-axis travel: 600 mm z-axis travel: 805 mm Control: Sinumerik 840D Machine weight approx. 13 t 1 horizontal machining center Make: HECKERT Model: CWK 500D Year: 2003 Serial No.: 16087 Control system: Siemens, type Sinumerik 840D Travel paths X/Y/Z: 800 x 600 x 805 mm 2-station pallet changer Pallet size: 500 x 500 mm NC rotary table: 360° x 0.001° Dkjdpfx Aeuddgfommsn 60-position tool changer Tool holder: HSK 63 Max. speed: 15,000 rpm Internal coolant supply 50 bar Operating hours: 32,450 Spindle hours: 6,080 Accessories: Coolant temperature control, band filter, chip conveyor, spindle cooling, Preparation for infrared measuring probe

Stanje: skoraj kot novo (rabljeno), Range (depending on lighting conditions): up to 15 m Range with laser receiver: 30 m or more Leveling accuracy over 5 m: +/- 1 mm Self-leveling range: 4° ± 0.5° Horizontal line accuracy at 5 m: ± 1.5 mm Vertical line accuracy at 3 m: ± 0.75 mm Number of laser lines: 2 Dksdpfjd Ecncjx Ammon Weight: 485 g

Stanje: novo, Table length: 2400 mm Table width: 1200 mm Table height: 200 mm Material thickness: 25 mm Weight: 920 kg Manufacturer: GERD WOLFF Technical details: • Length: 2400 mm • Width: 1200 mm • Height: 200 mm • Weight: 920 kg • Bore diameter: 28 mm • Bore spacing: 100 mm • Plate thickness: 25 mm Advantages and Features • 3-day gas nitriding process • Improved corrosion resistance • Anti-adhesion protection against weld spatter • Maximum load capacity • Enhanced fatigue strength • Increased vibration resistance • Fine laser-engraved scale • Reinforcement by weld seams and ribs on the underside • Optimum working height of 820–865 mm • 6 height-adjustable support legs • Matching accessory set available (optional) Our welding tables are manufactured using HT 300 cast quality and are nitrided as a single unit after mechanical machining. Dkjdpfx Ameynbmmomen In addition, they feature a precise fine scale engraved using laser technology. To ensure adequate stability, our welding tables are reinforced with weld seams and ribs on the underside (see images). Furthermore, they undergo a 3-day gas nitriding process, which increases the tables’ corrosion resistance as well as their durability and vibration fatigue strength. All our tables are equipped with adjustable legs. The minimum adjustment range is 620 mm; the maximum is 665 mm. This allows for a variable working height from 820 to 865 mm. Other available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 The illustrations do not depict the original size and are for reference only. Our welding tables are manufactured by a renowned producer for our distribution brand "GERD WOLLF Maschinenfabrik." 3D welding table – 3D clamping systems – 3D precision welding table

Stanje: dober (rabljeno), številka stroja/vozila: 98260075, a used WMW profile steel shear Punching force: 420 kN (42 tons) Throat depth of punch: 320 mm Flat bar shear cuts 100 x 18 mm Bar shear cuts solid round/square material: 36/30 mm Dsdsb Ilbfepfx Ammekn Further technical data upon request.

Leto izdelave: 1974, stanje: zelo dobro (rabljeno), Kriogeni cisterni vagoni, plin, vagoni, cisterni vagoni, tirna širina, CO2, ogljikov dioksid, skladiščenje. CO2-plinski vagon, cisterni vagon, ogljikov dioksid, transport, kriogeni cisterni vagoni, skladiščenje Izvoz iz EU Djdpfehfv Ehex Ammokn Proizvajalec: Rheinstahl AG Leto izdelave: 1974 Prostornina: 51,79 m³ Tlak: 20 bar Preizkusni tlak: 30 bar Ogljikov dioksid, LCO2, transport Za več podrobnosti nas kontaktirajte.

Leto izdelave: 2024, obratovalne ure: 5 h, stanje: kot nova (razstavni stroj), 1 Hydropneumatic Press Type STHP 60 kN with Two-Hand Operation – Floor Model with and without Base Dedpfjpn Unvsx Ammjkn The compact and user-friendly benchtop model features a hydropneumatic drive with pressure intensifier, which can increase the punching force by up to five times. During the working stroke, the pressure intensifier supplies oil to the punching cylinder, resulting in a purely hydraulic punching stroke. The return stroke is performed directly using compressed air. The screw-in adapter for the piston rod of the working cylinder allows for the installation of special tool holders.