Linija cevi OTO 89.6 / 4.5 QTC

OTO MILLS Tube Mill OTO 89.6 /4.5 QTC

OTO 89.6 QTC Tube Line with Quick-Change System

Working Range:
- Diameter: 26.9 – 89 mm
- Wall Thickness: 1.5 – 6.3 mm (with limitations: end joiner up to 4.5 mm, flying saw up to 5 mm)
- Length: 4 – 12 m

OTO 89.6 QTC Tube Line | Year 2008 featuring:
- Off-line strip coil preparation station
- Fully automatic entry line (MTM)
- OTO 89.6 forming line (OTO MILLS)
Dsdpfxjv Dinmj Adhocn
- OTO 89.6 QTC quick-change system (OTO MILLS)
- 450 kW high-frequency welder (EMMEDI)
- TS90 cold saw (SEUTHE)
- 3" automatic chamfering unit (MAIR)
- Automatic packaging unit (MAIR)
- Automatic strapping unit (MAIR / SIGNODE)

SUPPLY SCOPE SUMMARY

1. Automatic entry line with off-line strip coil preparation, including:
- Twin decoiler with off-line tail shear
- Pressure roll and straightener
- Automatic strip end joining unit
- Horizontal accumulator with turntable

2. OTO 89.6 QTC Tube Line with:
- Cast steel frame
- Induction-hardened and ground 18NiCrMo5 steel shafts
- Independent marking station
- 95 mm diameter shafts with cylindrical fit and drive key
- Vertically adjustable upper shaft (single-point manual adjustment)
- Hydraulic compensator in forming stands
- 4 breakdown passes with 140 kW AC motors / 3 FinPass stages with 100 kW AC motors
- 4 sizing passes with 140 kW AC motors

3. OTO 89.6 QTC quick-change system

4. 450 kW high-frequency welder

5. Double scarfing unit with chip breaker and waste conveyor

6. SEUTHE TS90 cold saw

7. MAIR AUTOMATIC FINISHING AND PACKAGING LINE with:
- CNC tube inspection line
- MAIR TFA.3/12.5 tube chamfering
- MAIR automatic packaging unit
- Signode automatic strapping unit

Round tube diameter: 26.9 – 89 mm
Square tube: 30x30 – 70x70 mm
Rectangular tube: 40x20 – 100x40 mm
Wall thickness: 1.5 – 6.3 mm (with limitations: end joiner up to 4.5 mm, flying saw up to 5 mm)
Tube length: 4–12 m
Working direction: Right to left
Speed: 120 m/min
Automatic entry line: MTM
Tube mill: OTO MILLS 89.6 QTC
Flying saw: SEUTHE TS90
High-frequency welder: EMMEDI TFU450
Packaging unit: MAIR .6.D.F and SIGNODE M400TSM

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.