Stroj za valjane pločevine

OSTAS 4R OHS 3070 x 275

Stanje: rabljeno, Leto izdelave: 2023, nosilnost: 5.000 kg, dvižna višina: 3.770 mm, skupna dolžina: 5.930 mm, Diesel Forklift Linde H 50D-01/600 Drive: Diesel Year of manufacture: 2023 Kledpfx Aexd El Rsf Nel Lifting height (mm): 3,770 Load capacity (kg): 5,000

Stanje: novo, Bending capacity: 6.0 mm Working length: 3100 mm Material thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4,88 x 1,16 x 1,18 m Image similar Bending performance: 8.0 mm » at 3x top roll diameter. Pre-bending: 6.0 mm » at 1.5x top roll diameter. Top roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of the top and bottom rolls via planetary gearboxes Kodpfx Afsd Ab H Ho Nell • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of the side rolls, synchronized via PLC • Hydraulic adjustment of the lower roll via torsion shaft • Pressure-adjustable lower roll • Electric and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Catalog, see the following link: Important points for cone rolling: • The max. sheet thickness is 50% of the nominal capacity • Cone length must be a max. of 30% or more than 60% of the roll length • Hardened rolls are recommended

Leto izdelave: 1991, Stanje: dober (rabljeno), številka stroja/vozila: 07282, Offer 22336 Technical specifications: Kodpfx Afemdqlls Nell - Max. working width: 3030 mm - Max. sheet thickness without prebending: 4 mm - Max. sheet thickness with prebending: 3 mm - 3 driven rollers - Roller diameter (top / bottom): 205 / 185 mm - Working speed: m/min - Drive – brake motor: 400 V / 7.5 kW - Space requirements: approx. W 5500 x D 1400 x H 1300 mm - Weight: approx. 4.7 t - With prebending - Rear roller can be inclined - Swing-out bearing for pivoting the top roller - Extended roller ends for mounting profile rolls - Forward and reverse operation - Separate control panel

Stanje: novo, Capaciteit, Ø mm ----- 57 x 2 Radius, min/max ----- 20/250 Radiussverschil ----- 50/230 Buigsnelheid/herhaalnauwkeurigheid ----- 230º/s. ±0,05° Doo rstanglengte ----- 1.000–∞ Gewicht ----- 5.000 kg Machineafmetingen ----- 3,0 x 1,6 x 1,5 m Buisrotatie ----- 0–360°/sec Lengte-invoer ----- 0–1.800 mm/sec Tolerantiegraad ----- 0,05°/mm Standaardcomponenten voldoen aan VDMA-, ISO- en DIN-normen OPTIES * Online koppeling met CAD-systeem en meetmachine * Automatisch buismagazijn met vrij programmeerbare robot of laadarm * Lasonderzoek en buispositionering elektomagnetische of optische detectie * Vrije radiusbuiging Klsdpfx Afsga T E Ae Nol * Simulatie/Botsingscontrole * Verlenging van de bedlengte

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Technical Specifications: Cone Rolling Machine Working width: 1050 mm Max. bending capacity for mild steel St40: 4.0 mm Diameter of conical upper roll: 70 - 185 mm Diameter of lateral and central lower rolls: 105 mm Cone bending device Mobile control panel with digital display Hydraulic drop-end bearing CE marking Motor power: 5.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tons Condition: Very lightly used, as-new condition The seller assumes no liability for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty. Ksdpew An Uhofx Af Noll

Stanje: novo, Capaciteit, mm ----- 25 x 2 mm Min/max buigradius ----- 10/100 mm Radiusverschil ----- 90 mm Buigsnelheid/herhaalbaarheid ----- 500º/s. ±0,05° Buislengte ----- 1.350 ∞ mm Gewicht ----- 2.200 kg Kedpfx Afjga T Exo Nsll Machineafmetingen ----- 3,0 x 1,2 x 1,3 m Buisrotatie ----- 0–850°/sec Lengteaanvoer ----- Standaard 0–2.400 mm/sec Booster ----- 0–1.200 mm/sec Tolerantiegraad ----- 0,05°/mm Draaitijd buigkop ----- 0,75 sec Standaardcomponenten volgens VDMA-, ISO- en DIN-normen. OPTIES * Online verbinding met CAD-systeem en meetmachine * Automatisch buismagazijn met vrij programmeerbare robot of laadarm * Lasnaadherkenning en buispositionering via elektromagnetische of optische detectie * Vrije radiusbuiging * Simulatie-/botsingcontrole * Verlenging van bedlengte

Stanje: dober (rabljeno), Leto izdelave: 2017, Sahinler 4R HSS 20-280 Hidravlični 4-valjni stroj za krivljenje pločevine – Leto 2017. Dolžina upogibanja 2050 mm. Maksimalna zmogljivost upogibanja – mehko jeklo 20 mm. Kedpjxau D Isfx Af Nell Premer zgornjega valja 280 mm, premer spodnjega valja 280 mm, premer stranskih valjev 220 mm. Hitrost upogibanja 1,5 / 5 m/min. Moč motorja 16 kW.

Stanje: dober (rabljeno), Leto izdelave: 2000, 1 used 4-roll plate bending machine Manufacturer: Stöting Model: VB 322 Serial number: 1591 Year of manufacture: 2000 with Acon control system Working length: 1000 mm Kledpfx Aev Ibkbsf Njl Max. sheet thickness: 12 mm Pre-bending capacity: 8 mm Top roll diameter: 250 mm Lower roll diameter: 210 mm Side roll diameter: 169 mm Dimensions (L): 3200 mm Width: 1370 mm Height (without support arm): 1370 mm Drive power: 6.5 kW Weight: 3.2 t

Stanje: rabljeno, Leto izdelave: 2017, Premer cevi (maks.): 80 mm, dolžina vpenjala: 4.500 mm, Mandrel Bending Machine S8004 ----- For the production of dimensionally accurate tube geometries with bending radii of up to 1.5XD → Maximum bending capacity, tube: 76 x 4 mm (400 N/mm²) → Maximum bending capacity, tube: 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity, tube: 76 x 2.9 mm (stainless steel) → Total connected load: 7 kW Kledpfxsttah Rs Af Nsl → Tube loading length: 4.5 m Robust and durable steel construction in a rigid, force-locking design – no twist-prone construction resulting from, for example, split design of bending head and mandrel carrier. Maintenance-free electromechanical drive for the bending axis. The control’s touch display enables easy and intuitive programming and operation. After inserting the tube, it is fixed by the chuck in the carriage, ensuring precise tube positioning and thus the production of dimensionally accurate geometries. The standard equipment also includes geometry checking prior to the bending process: If bending begins in the wrong position, the machine does not grant release, thus ruling out operating errors. Optional additional features provide more convenience and increase throughput as well as the system’s efficiency. Data exchange from the optional TBS-3D tube calculation software (PC version) is possible via USB stick or FTP access from the computer to the machine controller. USB and LAN (RJ45) connections are included as standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard equipment: → Electromechanical drive for bending axis, 4 kW → Rotational speed 2.9 rpm (=17°/sec.) → Bending direction: left → Bending angle resolution: 0.1° → Max. bending radius: 200 mm → Bending shaft diameter: 50 mm → Electronic length measurement ±0.1 mm → Electronic rotation angle measurement ±0.1° → Manual stop system (longitudinal stops) → Manual indexing system (15° in rotation) → Three-jaw chuck for securing tube in the carriage → External control panel PLC control: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot switch operation → Data transmission via network (W)LAN or USB → Material database Unique graphic programming: simple geometries can be calculated directly on the machine. After entering length and angles, the control computes the feed and bending angles directly. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable pre-emptive mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (on rollers) → Radius extension Images show new machine

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, vrsta upravljanja: NC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: hidravlični, model krmilnika: 4 axis with digital readout, število valjev: 4, premer zgornjega valja: 360 mm, premer stranskega valja: 320 mm, premer valja: 400 mm, dolžina valja: 3.050 mm, delovna širina: 3.000 mm, najv. debelina pločevine: 20 mm, najv. debelina jeklene pločevine: 20 mm, maks. debelina pločevine iz nerjavečega jekla: 26 mm, skupna masa: 17.400 kg, skupna dolžina: 5.500 mm, skupna širina: 2.010 mm, skupna višina: 1.900 mm, moč: 18,5 kW (25,15 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nujno zaustavitev, 4RH17/5NC Kapaciteta 3000 x 20 mm 4-valjna NC krožna upogibalka Imcar, letnik 2016 Kapaciteta širine pločevine: 3000 mm Debelina pločevine: 20 mm Predupogib: 16 mm Srednji valji: 360 mm Stranski valji: 320 mm Uporabna površina valjev: 3050 mm Napajanje: 380 V / 50 Hz Električni motor: 25 KM, osrednja hidravlična enota Teža: 17 ton Dimenzije: 5500 x 2010 x višina 1900 mm Konfiguracija kot na priloženi fotografiji Kaljeni valji z zelo visoko površinsko odpornostjo Priključek za stožčasto upogibanje NC digitalni prikaz, programabilni 4 osi Klodpfjxqyxlex Af Nel Osrednja podpora, vertikalno motorizirana Valjčna miza s hidravličnim stranskim nosilcem Varnost in nujni sistemi po standardih Hidravlično gnani valji s planetnimi gonili Individualno hidravlično gibanje valjev z dvojnim začetnim stiskanjem Prednja hidravlična vrata za raztovarjanje zaprtih lupin