Hidravlični agregat 0,6 kW 1380 vrt./min

Orsta Hydraulik B1,6/R TGL 10859

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Ledpfx Aofxyhfobbjhb Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: rabljeno, Leto izdelave: 1988, Tailstock yes To hobbyists yes Lodpsu Su I Esfx Abbohb Condition not checked Machine weight approx. 3.8 t

Leto izdelave: 2000, obratovalne ure: 50 h, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, dvižna višina: 10.000 mm, glavna hitrost dviga: 6.300 mm/min, Double Girder Crab 16/4t, 2 units available Lhsdpfxsrbyqks Abbsb Consisting of: Main Hoist 16t with mechanical micro speed Type: AS6040-25 4/1 L2 Reeving: 4/1 Lifting speeds: 6.3 / 0.63 m/min Lifting height: 10 m FEM 3M Double hook block Auxiliary Hoist 4t Type: SH5020-25 2/1 Reeving: 2/1 Lifting speeds: 12.5 / 2 m/min Lifting height: 12 m FEM 2M Single hook block Excellent condition, barely used, including load spectrum memory and load summation, with bottom block, electrics 400/230V, crab track gauge 1400mm, crab travel speed 20/5 m/min

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Hot water tank / thermal storage tank made of V4A stainless steel, vertical design Technical data / dimensions Available quantity: 1 Volume: approx. 164,000 liters Tank type: storage tank Condition: used Food grade: yes Design: vertical Internal diameter: approx. 3,900 mm External diameter: approx. 4,200 mm Cylindrical height: approx. 13,000 mm Total height: approx. 17,220 mm Weight: approx. 10,500 kg Specific weight of medium: 1.0 t/m³ Operating pressure: non-pressurized Wall thickness (shell/cylinder): approx. 5.3 - 7 mm Floor clearance: approx. 1,800 mm Operating temperature: -10°C / +90°C Material / properties Internal shell material: V4A (1.4571) Outer shell material: stainless steel Internal surface: 2B finish Internal weld seams ground smooth Insulation Insulation present Insulation thickness: approx. 100 mm Insulation material: mineral wool Insulation jacket material: aluminum Insulation jacket: bolted/riveted Remarks: Cone roof cladding: stainless steel Cylinder cladding: aluminum trapezoidal sheet Cone cladding: smooth aluminum sheet Equipment Base type: support ring/stand collar Fixation: fixed Top section: conical base Bottom section: conical base Top: 1 x manway DN 200 with insulation cover 1 x flange DN 32 welded into manway (CIP) 1 x manway drainage DN 32 1 x empty cable conduit DN 50 1 x overflow DN 150 2 x lifting eyes Lsdpfx Ajqagl Hobbohb Shell: 1 x inlet nozzle DN 100 1 x filling line DN 100 4 x thermometer sleeves (ø 26 mm) with insulation box 1 x CIP line DN 32 1 x nameplate 1 x access door (approx. 2,000 x 1,000 mm) 1 x outlet nozzle DN 100 Bottom: 1 x pivoting cone DN 450, ending in smooth flange DN 100 Remarks: For remaining details, refer to images and drawings. Documentation Drawing

Leto izdelave: 1990, Stanje: dober (rabljeno), številka stroja/vozila: 3-201065, Maximum material clearance in feed tube: 65 mm for material lengths up to: 3000 mm Feed force steplessly adjustable up to max.: 550 N Loading time approx.: 30 s Electrical connection/power requirement: 380 V/1.5 kW Space requirement: 5810 x 920 x 1515 mm Lhedpfxsdlm Dhe Abbsb Weight: 1200 kg

Stanje: rabljeno, barva: rumena, prva registracija: 01/1995, * Manufacturer: HYSTER * Model: H2.50XM * Serial No.: D177B22181S Lhodpfxsi Tfape Abbob * Attachment: S/S 2.00-1.50 1067 mm * Year of manufacture: 1995 * Drive: Diesel * Operating hours: 18,151.8 h * Unladen weight: 4,265 kg * Back tilt: 6 degrees * Tyre size: 7.0 x 12 (front), 6.0 x 9 (rear) * Tyre pressure: 0 (front / rear) * Track width: 1,125 mm * Rated capacity with upright mast and specified attachment * Lift height: 5,550 mm * Load capacity: - 2,040 kg at 500 mm load center - 1,860 kg at 600 mm load center - 1,710 kg at 700 mm load center * Subject to change, prior sale, and errors excepted.

Stanje: dober (rabljeno), Leto izdelave: 1985, CNC Lathe Manufacturer: GILDEMEISTER Type: N.E.F. 1020 Year: 1985 Control: EPL 2 Swing diameter over bed: 1020 mm Swing diameter over cross slide: 600 mm Turning length: 3000 mm Spindle speeds: 5 - 1120 rpm Motor power: 30 kW Spindle bore: 128 mm Tool turret: Parat size 4 with 10 tool holders Faceplate: 900 mm, steady rest, drilling support, chip conveyor Complete machine documentation and parameters available. Lhsdpfx Abjqc Ul Aebob Machine is dismantled and in storage. Total weight: approx. 12,000 kg. For further technical data, see datasheets.

Stanje: novo, Tlak 30 t Hod 400 mm Prehod med stebri vzdolž/prečno 740 x 300 mm Vgradna višina 900 mm Volumen sistema 6,5 l Hitrost navzdol 7,5 mm/sek Hitrost navzgor 12,5 mm/sek Lhjdpfx Absitt S Tsbeb Moč motorja 2,2 kW Teža stroja pribl. 0,6 t Dimenzije pribl. 1,35 x 0,85 x 2,1 m Visokokakovostna hidravlična stiskalnica omogoča ročno in motorizirano upravljanje. Cilindri se lahko pomikajo bočno. Varnostni ventil v končnem položaju cilindra. CE oznaka.

Stanje: novo, Capacity: 750 kg Max. workpiece size: 900 x 300 mm Total workpiece weight: 550 kg Max. workpiece weight: 30 kg per piece Rotational speed: 22 rpm Filling ratio: 50-60% Colour: blue, RAL 5015 Opening: 1775 x 440 mm Total power requirement: 3 kW Machine weight approx. 1,995 kg Space required approx. 2.9 x 1.33 x 1.75 m Ljdpfx Ajv S Iq Aobbjhb New scouring or deburring drum / deburring machine for safe and efficient deburring of workpieces. Suitable for heavy-duty applications. Hexagonal drum lined with durable, vulcanised rubber (thickness: 36 mm), closure lid with gas pressure springs, safety shutter to protect from rotating drum, robust design, easy to operate. Control via timer on the operator panel, main switch and emergency stop switch included. Maximum fill volume is 40% of drum capacity, equal to 750 kg (comprising 550 kg of workpieces + 200 kg deburring media). Includes 200 kg of high-manganese steel balls or alternatively, cast iron pentagons (available from Sideros). Special accessories: - Infinitely variable rotational speed via frequency inverter, approx. 13 - 22 rpm (€3,200) - Soundproof enclosure (65/70 dB, see photo 9) and Sideros ECO B2 dust extraction unit (see photo 8) available at extra cost. The manufacturer recommends sending 100 kg of sample parts of the material for test deburring before order placement for complex workpieces. Otherwise, no responsibility can be accepted for the deburring result. VIDEO available on our website. Warranty: 12 months with single-shift operation. Defective parts must be returned when spare parts are sent. Machine downtime is not covered. STOCKING DEALER WITH 1,600 m² SHOWROOM.

Stanje: dober (rabljeno), Manufacturer: Takraf / Zemag Blade diameter: 1,250 mm Roll width: 2,000 mm Ledpfeg Sntyjx Abbohb With drive Currently being overhauled, sandblasted, and painted. For more detailed information, please refer to the PDF below.