Stroj za elektroerozijsko globljenje

OPS INGERSOLL Gantry Eagle 1200 EDM

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, potovalna razdalja osi X: 3.500 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 770 mm, hitro pomikanje X-os: 30.000 m/min, hitri pomik os Y: 30.000 m/min, hitri pomik na osi Z: 30.000 m/min, širina mize: 1.000 mm, dolžina mize: 4.150 mm, obremenitev mize: 4.000 kg, 3-Axis Machining Centre Hedelius - BC 100 MAGNUM X-axis travel: 3500 mm Y-axis travel: 1000 mm Z-axis travel: 770 mm Table length: 4150 mm Table width: 1000 mm Table load capacity: 4000 kg Feed rate X-axis: 30,000 mm/min Feed rate Y-axis: 30,000 mm/min Feed rate Z-axis: 30,000 mm/min Tool holder: 50 ISO/BT/MK Spindle power: 50 kW Spindle speed: 4,500 rpm Tool changer: 50 positions Number of controlled axes: 3 Chip conveyor: yes Coolant system: yes Rsdpfowycmmsx Ag Tsp Length: 8,000 mm Width: 5,000 mm Height: 3,700 mm Weight: 30,000 kg

Stanje: dober (rabljeno), Leto izdelave: 1997, x-pomik 600 mm y-pomik 450 mm z-pomik 400 mm Krmiljenje Heidenhain 430 ITNC Vpenjalo orodja SK 40 Obratovalna napetost 400 V Krmilna napetost 24 V Teža stroja ca. 6 t - Obratovalne ure: 48.690 - Maks. obremenitev mize: 1.000 kg - Teža stroja: 6.000 kg Redswbi A Dopfx Ag Tjp - Vključno z nosilci orodij – SK40 - Vključno z vsemi opisi - Vključno s programirnim priročnikom – Heidenhain - Vključno z enim strojnim primežem - Vključno s pritrditvenimi kremplji

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking Rodpfxeu Aa I Sj Ag Top • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Oil Hydraulic Double Column Press 400 T with Sliding Table Press Design: Double column press Thermally neutral: 80 – 120 °C Number of operator sides: 1 side Forces Pressing force, max.: 4000 kN Stripping force, max.: 400 kN Pressure build-up time (closed tool, steel on steel): max. 4 sec. Dimensions: 3,800 mm length x 4,475 mm width Redpsph Uk Nefx Ag Tep Max. opening width: 800 mm Stroke: 800 mm Table height above floor: 1100 mm Height above floor (overall machine height): approx. 4300 mm Minimum hall height: 5500 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight Total weight of the press (without operating fluids and table plate): approx. 28 tons Press table Table size: 1500 x 1500 mm Speeds Fast closing: 100 mm/sec Pressing speed: 8 – 3 mm/sec Sound Pressure Sound pressure level (measured at 1.5 m height at the control panel, per DIN 45635-T16-KL3): max. 78 dB(A) Hydraulics Number of press/drive cylinders: 1 pc. Operating pressure, max.: 300 bar Pressure build-up time (pressing): 4 sec. Pressing stroke pressure accuracy: +/- 3 bar Main pump: BOSCHREXROTH axial piston pump, approx. 145 L/min Oil volume: HLP 46 MW approx. 1000 liters Ambient temperature, max.: 40°C Oil temperature, max.: 55°C Preheat temperature: °C Auxiliary pump: BOSCHREXROTH gear pump 10 L/min, pressure maintenance up to 300 sec. Electrical Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic connection main motor: 40 kW Sliding Table Press with 400 T Capacity Closing speed up to 100 mm/sec (adjustable via touchscreen) Opening speed up to 100 mm/sec (adjustable via touchscreen) Initial pressing speed 10 mm/sec (adjustable via touchscreen) Table plate size: 1500 x 1500 mm Ram size: approx. 1600 x 1500 mm Oil temperature monitoring: 55°C warning, 60°C shut-down Automatic lubrication (adjustable via touchscreen) Free positioning of the ram (adjustable via touchscreen) SICK/PILZ light barriers, 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram locks Oil circuit cooling (adjustable via touchscreen) Ejector in table, 20 T pressing force, 350 mm stroke Ejector moves externally with the table Table plate, precision milled, with DIN 22 T-slots Pressure adjustment from 60 T up to 400 T (adjustable via touchscreen) Travel limiter adjustable by pressure or position Setup, single stroke, and cycle operation (adjustable via touchscreen) Swiveling control panel on the cabinet Two-hand operation, with open button, manual/single stroke/cycle switch Assembly, commissioning, operator training at extra charge Control system by SIEMENS (S7 1200), including 9-inch touchscreen monitor. Remote maintenance unit SECOMEA - Ethernet included in scope of supply. Side of the press with two windows (1000 mm high, 800 mm wide) with double doors each. (Sliding table press, hydraulic press, double column press)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Os X 5.000 mm Os Y 3.000 mm Os Z 1.500 mm Velikost mize 5.000 x 2.500 mm Vpenjalo orodja HSK 63 Menjalec orodja 60 pozicij Krmiljenje HEIDENHAIN TNC 640 Rodpfsx E S E Njx Ag Tep Vključno z notranjim hlajenjem (IKZ) 40 bar Vključno s simultano vilicasto glavo Vključno s popolno dokumentacijo

Stanje: pripravljen za uporabo (rabljen), skupna višina: 3.300 mm, skupna širina: 3.450 mm, skupna dolžina: 6.000 mm, proizvajalec krmilnikov: Siemens, lastna masa: 17.000 kg, Model: FTV 850 Hlajenje skozi vreteno Delovno območje se lahko razdeli na dva dela 2 magnetni mizi Premični steber, podoben Mazak VTC / Unisign / Hedelius Težka konstrukcija ogrodja Vzdolžno pomikanje X-os: 1800 mm Prečno pomikanje Y-os: 850 mm Vertikalno pomikanje Z-os (višina): 800 mm Rodjwxz D Uspfx Ag Top Dimenzije vpenjalnega prostora – miza: 2300 x 900 mm Univerzalna glava (2x 360°): ISO 50 Vrtalna glava (1 x90°): 19 kW

Leto izdelave: 2009, Stanje: rabljeno, Technical details: Tool holder: Ø 54 mm Voltage: 3-phase AC 400 V / 50–60 Hz Compressed air connection: 6 bar Total power requirement: 11 kW Total weight approx.: 120 kg Dimensions (L x W x H): 0.7 x 0.65 x 1.7 m Rjdpowp I S Hofx Ag Top Induction shrink fit machine with water cooling (30-liter tank, integrated in housing) Application: For ultra-fast tool changes via targeted inductive heating Cooling medium: Emulsion Suitable for Ø 3–50 mm carbide (HM) and Ø 6–50 mm HSS tools Tool holder Ø 54 mm Runout accuracy < 0.003 mm ThermoGrip shrink chuck ISGS 3200-1, Ø 3–32 mm Operation via control panel

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, 1 rabljeni stroj za umetanje Haeger 412 za umetanje umetaka u lim (studs i matice sa samourezivanjem) na prodaju. U kompletu s alatom i donjim alatom u obliku slova J. Rodpfjwbhipjx Ag Tjp

Leto izdelave: 2023, Stanje: novo, SONDA ist eine kostengünstige Lösung zur Nachrüstung einer Ultraschall-Reinigungseinheit. Wenn Sie bereits über einen eigenen Edelstahltank verfügen und diesen in eine Ultraschallwascheinheit verwandeln möchten, ist die SONDA die ideale Wahl. Wir fertigen SONDA-Eintaucheinheiten unabhängig von den Abmessungen Ihres Tanks. Sie müssen uns lediglich die Maße Ihres Tanks mitteilen und das Gerät mit wenigen Handgriffen montieren. Rjdpfxod I E Ivs Ag Top Funktionsprinzip -Jede einzelne, tauchfähige SONDA-Einheit arbeitet mit einem eigenen Hochfrequenzgenerator. -Die tauchfähigen SONDA-Module sind montagefertig für die Tankwand vorbereitet. -Ideal geeignet zur Nachrüstung großer Behälter, z.B. für Beschichtungs- und Oberflächenbehandlungsprozesse. Tauchschwinger, Ultraschallreiniger, Wandler, Ultraschall Gerne senden wir Ihnen auf Anfrage die technischen Spezifikationen zu.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 37.684 h, največja hitrost vretena: 18.000 obr/min, skupna masa: 30.000 kg, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 1.300 mm, pomik po osi Z: 900 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, število osi: 5, This 5-axis HERMLE C60U Dynamic was manufactured in 2014. It features impressive travel ranges of approximately 1,200 mm in X, 1,300 mm in Y, and 900 mm in Z. The machine is equipped with an NC rotary tilting table with a diameter of 1,350 mm and a spindle speed of 18,000 rpm. If you are looking for high-quality machining capabilities, you should consider the HERMLE C60U Dynamic universal machining center we are offering for sale. Contact us for further details. • Supply voltage: 400 V / 3~ • Mains frequency: 50 Hz • Control voltage: 24 V • Rated current: 113 A • Power consumption: 78 kVA • Circuit diagram No.: 1-325-MS-96-021 Rsdpfsylzc Njx Ag Tsp • Axis configuration: 5 axes (X, Y, Z + A/C rotary table) • Software option: KinematicOpt • Tool interface: HSK-A 63 • Table type: NC rotary tilting table • Table diameter: Ø 1,350 mm • Table size: 1,350 × 1,100 mm • Electronic thermal compensation (iTNC) • Electronic handwheel (iTNC) • Operating hours: 37,684 h • Spindle replaced approx. 600 operating hours ago • Exclusions: Clamping devices, tool holders, tools, and zero-point clamping systems shown in the pictures are not included in the scope of delivery Additional equipment • Coolant through the spindle, 80 bar (high pressure) • Air blast device • Air through spindle center • Chip flushing gun • Emulsion mist extraction • Probe: Heidenhain measuring probe • Tool breakage monitoring: BLUM