ELEKTROEROZIJA POGOPKA

ONA HS 700

Stanje: rabljeno, Table length 400 mm Gbodjvwgq Sjpfx Ahmen Table width 300 mm X-axis travel 300 mm Y-axis travel 250 mm Z-axis travel 250 mm Machine weight approx. 1.2 t Space requirement approx. 2000 x 1200 x 2500 mm The machine is supplied with a very comprehensive range of accessories.

Stanje: rabljeno, Leto izdelave: 2016, Swing diameter: 366 mm Turning length: 700 mm Control: Celos Mitsubishi M730U Swing diameter over bed: 920 mm Swing diameter over cross-slide: 742 mm Max. spindle speed: 4,000 rpm Main spindle drive power: 18.5/18.5/15 kW Max. bar diameter: 80 mm Number of tool stations: 12 positions Tool holder: BMT 80 X-axis travel: 260 mm Gbodpfsyvvt Sex Ahmen Z-axis travel: 795 mm Y-axis travel: +/- 50 mm Tailstock quill: MT5 Operating hours: approx. 20,564 h Power-on hours: approx. 28,664 h Machine weight: approx. 4.7 t The machine has been overhauled with the following components: - Ball screws on X, Y and Z axes - New main spindle - Complete maintenance package - Fully re-adjusted and measured As a result, the machine is in an as-new technical condition. There are 2 machines available. Price is per unit. Technical features: - Turret, 12 positions BMT 80, max. speed 10,000 rpm, 5.5/5.5/3.7 kW - Y-axis - Projection length for driven tools: 100 mm - Scraper belt chip conveyor - Coolant system with increased pressure, 5 bar Accessories: - Coolant shower at main spindle chuck - Compressed air blow-off system for tool cutting edges - Line filter for coolant system - Compressed air blow-off system for tailstock center tip - Mechanical I/F for oil mist separator, 150 mm - 4-color signal light - EtherNET I/P interface for automation Accessories, depicted tools and clamping devices are only included in the scope of delivery if specified in the additional information. Modifications and errors in the technical data and specifications as well as prior sale are subject to change!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, Uporabni premeri žice: od 0,1 do 0,3 mm. Gedpfx Ajykrcqshmebn Stroj je kot nov, z zelo malo delovnimi urami, večinoma uporabljen za izdelavo prototipov.

Stanje: rabljeno, Leto izdelave: 2017, Potopne erozijske stroje / EDM Pomik X: 600 mm Pomik Y: 400 mm Pomik Z: 450 mm Velikost mize X: 750 mm Velikost mize Y: 600 mm Maks. velikost obdelovanca X: 1040 mm Maks. velikost obdelovanca Y: 730 mm Gsdpfoym Rr Njx Ahmjbn Maks. velikost obdelovanca Z: 410 mm Maks. masa elektrode: 50 kg Maks. masa obdelovanca: 1600 kg Generator: 64 amperov Hladilnik Spustljiv rezervoar Krmiljenje Charmilles Charmilles krmilni sistem Natančna obdelava oblik in orodij Integrirani generator Dielektrični sistem s hlajenjem Primerno za izdelavo orodij in oblik

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, skupna masa: 2.722 kg, proizvajalec krmilnikov: MITSUBISHI, model krmilnika: M800, število osi: 5, This 5-axis Mitsubishi MV1200R was manufactured in 2018 and is equipped with advanced features such as an X-axis travel of 15.7", Y-axis travel of 11.8", and Z-axis travel of 8.7". It comes with a Mitsubishi M800 control system, automatic wire threading, and a chiller for enhanced performance. If you are looking for high-quality wire EDM machines, you should consider the Mitsubishi MV1200R we have for sale. Contact us for more information about this machine. Gbjdpox D Ryyefx Ahmsn Additional Equipment • Automatic wire threading • Chiller unit • 360 remote control installed • Includes round diamond guides • 1GB partition • Wire cutter • Angle Master advanced tapering • Angle Master software for precision tapering • CFAST Compact Flash card • Chiller chopper • DNC hardware Ethernet FTP • FS power supply • High-precision alignment gauge • Includes wire alignment gauge Machine Advantages Technical advantages of the machine: • X-axis travel: 15.7" • Y-axis travel: 11.8" • Z-axis travel: 8.7" • U/V-axis travel: 2.4" x 2.4" • Taper cutting angle: 15° @ 8" • Glass scale feedback: X, Y, U, V • Workpiece • Accuracy: .000002" • Table • Tank inner dimensions: 31.9" x 27.6"

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, obratovalne ure: 2.139 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NL257200651, stružna dolžina: 700 mm, premer struženja: 366 mm, moč vretenovega motorja: 19 W, največja hitrost vretena: 4.000 obr/min, izvrtina vretena: 91 mm, potovalna razdalja osi X: 260 mm, pomik po osi Z: 795 mm, skupna masa: 5.800 kg, We are offering this very well-maintained and low-hour DMG MORI NLX 2500/700 CNC turning and milling center, year of manufacture 2020. Manufacturer: DMG MORI Model: NLX 2500/700 Year of manufacture: 2020 Condition: Very good Category ID: 1128 Type ID: 2239 Type: CNC Turning and Milling Center Machine operating hours: 7,598 h Program running time: 2,139 h Details: Base machine NLX 2500 / 700 with driven tools and C-axis Universal 3-axis lathe Turning length: 700 mm Main spindle with integrated spindle motor ISM 80 (bar capacity in mm) AC motor with 15 / 18.5 / 18.5 kW output (100% / 50% / 25% duty cycle) 4,000 rpm Hydraulic clamping devices, see clamping cylinder / chuck C-axis with hydraulic spindle brake 10-position BMT turret 10-position tool drive NC tailstock CELOS® with Mitsubishi control M730UM Control: Control M730UM with CELOS CELOS - ERGOline Touch Spindle: Main spindle (spindle 1) standard Spindle options: Oil blower cooler for circulating coolant Chuck for main spindle: Main spindle (spindle 1) 10" hollow chuck Ø254 mm Main spindle (spindle 1) hollow clamping cylinder for 10" chuck Ø254 mm BB210A821 Options for chuck: Double foot switch with protective cover Tool turret: Rotating tools with 40/14 Nm, 10,000 rpm 12-position BMT60 star turret for MC configuration Overhang for driven tools 100 mm (limited Y-axis travel) Tailstock: NC tailstock quill for live center MK 5 (live center not included) Coolant / Chip disposal: Use of water-soluble coolant (emulsion) Hinged belt conveyor, discharge right (500, 700) Coolant system with increased pressure 5 bar I/F for oil mist separator (extraction opening Ø 150 mm + electrical components) (AFS 1100) AFS 1100 oil mist separator Measuring / Monitoring: Manual presetting device (swiveling) (standard) Godpfx Aeyxglkohmsbn Additional options: Customer supply voltage: 380 V Frequency: 50 Hz Metric settings SCHNEIDER transformer 45 kVA Technology cycles: Alternating spindle speed Control options: X-axis direction ISO Last maintenance: April 2024

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Velikost mize: 600 x 400 mm Največja velikost obdelovanca: 900 x 600 x 330 mm Največja teža obdelovanca: 750 kg Pomik X: 400 mm Pomik Y: 300 mm Gbodpfx Asyity Ujhmon Pomik Z: 300 mm Moč generatorja: 60 A Dimenzije stroja: 2190 x 1880 x 2360 mm Teža stroja: 2800 kg Dodatna oprema - Magnetna miza in vpenjalni sistem EROWA - Priročnik za stroj in navodila za uporabo Stroj je v zelo dobrem stanju in izvira iz majhnega družinskega podjetja, ki je bilo nedavno razpuščeno.

Leto izdelave: 2012, stanje: pripravljen za uporabo (rabljen), Splošni podatki Mere širina: 1850 mm Mere globina: 1300 mm Mere višina: 2500 mm Teža stroja: 1540 kg Glavni pogon Število osi: 3 Pomik Pomik X-osi: 350 mm Pomik Y-osi: 250 mm Pomik Z-osi: 250 mm Gbodpfjx D Inbex Ahmjn Miza Nosilnost mize: 400 kg Dodatna oprema Največja teža elektrode: 80 kg Ta 3-osni potopni erodirni stroj AgieCharmilles CABINET FORM20 je bil izdelan leta 2012. Idealen je za precizno izdelavo orodij in kalupov ter ponuja zanesljivo in zmogljivo delovanje. Če iščete visokokakovostne potopne EDM zmogljivosti, razmislite o stroju AgieCharmilles CABINET FORM20, ki ga imamo na voljo za prodajo. Za več informacij nas kontaktirajte. Uporabna področja EDM

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2016, obratovalne ure: 2.100 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 350 mm, pomik osi Y: 270 mm, pomik po osi Z: 270 mm, teža obdelovanca (maks.): 500 kg, skupna višina: 2.670 mm, skupna širina: 2.040 mm, skupna dolžina: 1.600 mm, širina mize: 350 mm, poteza s peresom: 430 mm, vrsta vhodnega toka: trifazni, tabela razdalje do vretena: 430 mm, dolžina mize: 550 mm, trajanje garancije: 6 meseci, hitrost pomika os X: 5 m/min, hitrost podajanja osi Y: 5 m/min, hitrost podajanja os Z: 15 m/min, vhodna napetost: 400 V, skupna masa: 1.600 kg, leto zadnje generalne obnove: 2025, obremenitev mize: 1.500 kg, vhodna frekvenca: 50 Hz, delovno območje: 770 mm, potrebna širina: 2.040 mm, potrebna višina: 2.670 mm, zahteva za prostor dolžina: 1.600 mm, Oprema: dokumentacija / priročnik, EDM 310MF30 Year of manufacture: 2016 Complete overhaul scheduled for 2025 Technical Data: Travel (X x Y x Z): 360 x 270 x 270 mm Worktable: 550 x 350 mm Work tank: 770 x 520 mm Distance table/quill min./max.: 160/430 mm Electrode weight: 25 kg Workpiece weight: 500 kg Filling height of work tank: 300 mm Power supply: 400V three-phase, 50/60 Hz Power consumption: 7 KVA Machine dimensions (W x D x H): 2040 x 1600 x 2670 mm Equipment: MF30 operating interface Touchscreen display Eroding generator exopuls+ 60A Hand control unit with enabling button Integrated cooling unit C-axis: 30 rpm, holding brake Table and head flushing/suction Cartridge filter system, new filters Work pump Steel table, T-slots CO² fire extinguishing system, TÜV certified 4-position tool changer Automatic quick-change chuck system Erowa/Hirschmann/3R Automatic central lubrication Automatic tank tracking Geometry and length compensation Proof of performance Gbsdpfxowz H U Re Ahmsn 6-month warranty Transport, on-site commissioning, training

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 18.955 h, največja hitrost vretena: 4.500 obr/min, potovalna razdalja osi X: 203 mm, pomik osi Y: 82 mm, pomik po osi Z: 585 mm, moč vretenovega motorja: 15.000 W, skupna višina: 1.852 mm, skupna širina: 1.935 mm, skupna masa: 6.000 kg, Premer palice (maks.): 65 mm, proizvajalec krmilnikov: FANUC, model krmilnika: 0i-TF, največja dolžina izdelka: 2.716 mm, število mest v zalogovniku orodij: 12, število osi: 4, This 4-axis NAKAMURA-TOME AS-200L was manufactured in 2017. It features a maximum turning diameter of 320 mm and a turning length of 570 mm. The machine is equipped with a 12-station turret and a main spindle speed of up to 4,500 rpm. If you are looking for a high-quality lathe, consider the NAKAMURA-TOME AS-200L horizontal turning machine we are offering for sale. Please contact us for further details. Standard equipment • Turret: 12-station drum turret • CNC control, 4 axes (including C-axis), Fanuc 0i-TF • Collision protection system (mechanical “airbag”) • Y-axis • 15" LCD monitor with USB port • Live tooling – 12 positions • Automatic central lubrication system • Work area lighting • Coolant pump – 180 W • Initial fill with coolant (Blaser coolant) Including Options • Transformer • Luck-Beil II (NT Manual Guide – graphical user interface for control) • Enlarged spindle bore to 71 mm (4,500 rpm; A2-6) • Upgraded main spindle motor Fanuc 15 / 11 kW (258 Nm) • High-pressure coolant system with Brinkmann pump • Shut-off valve for high-pressure coolant system • Low coolant level sensor • Parts ejector cylinder from counter spindle (100 mm stroke) • Machine status signal tower (3 colors) • Operator shelf underneath control panel • Parts catcher Type A (Ø71 mm / L150 mm / 3 kg) • Prepared for LNS bar feeder • Air blow through main and counter spindle • Manual tool setter (Renishaw, one arm for both spindles) • Spindle cooling system for main and counter spindle • Prepared for oil mist extraction system Technical Specification Counter Spindle Yes Driven Tools Yes Gsdpfsytqpnjx Ahmjbn