2 umira 2 udarca glave

OMEGA 2-2

Leto izdelave: 2002, Stanje: skoraj kot novo (rabljeno), številka stroja/vozila: 16.34.02, 6-matrični, 6-udarecni vijacni stroj (Header) MULTIPRESS MP610LS Tedsh Tkrajpfx Abgof Maks. premer odreza (500 N/mm²): 12 mm Maks. dolžina odreza: 105 mm Maks. dolžina izmeta (na strani matrice): 80 mm Maks. dolžina predizmeta: 23 mm Maks. hitrost: 180 kosov na minuto

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 130 kg, širina na sredini: 600 mm, premer brusilnega koluta: 450 mm, skupna širina: 2.110 mm, skupna dolžina: 3.120 mm, skupna višina: 1.435 mm, premer brušenja: 350 mm, poteza s peresom: 30 mm, širina brusilnega kolesa: 50 mm, hitrost vretena za brušenje: 2.000 obr/min, skupna masa: 3.100 kg, Max. grinding diameter: Ø350 mm Max. workpiece weight: 130 kg Grinding length between centers: 600 mm Grinding spindle speed: 1,500 or 2,000 rpm (Manual belt change) Standard grinding wheel: Ø 450 x Ø127 x 50 mm Grinding wheel width: from 25 to 50 mm Z-axis travel: 750 mm X-axis travel: 265 mm Grinding spindle power: 3.7 kW Tedpfx Absc Tnq Iogef Including the following standard accessories: - 120-liter coolant tank with 0.4 kW pump (200 l/min) and magnetic separator - Hydraulic tailstock - Removable splash guard - Hydraulic power unit - Standard grinding wheel Ø 450 x Ø127 x 50 mm - 1 grinding wheel flange - 1 grinding wheel flange extractor - Dressing holder with dressing diamond on tailstock - 2 dead centers - Dial gauge for table adjustment to 0° - Machine lamp - 3 detachable crane transport hooks - Leveling screws with base plates - Machine documentation Including the following special accessories: - Internal grinding device - Frequency inverter (Mitsubishi) for speed control at the work spindle - Frequency inverter for speed control at the grinding spindle with 5.5 kW motor, incl. display - 2-axis digital readout Heidenhain ND 780

Leto izdelave: 1994, Stanje: dober (rabljeno), Ziersch & Baltrusch Surface Grinding Machine Todpsk Ixl Aefx Abgof - Equipped with Formmaster 6 / 30 - Equipped with belt filter system - Equipped with coolant system - Width: 250 cm - Depth: 200 cm - Height: 220 cm Machine is in good condition and fully operational; it can be inspected and tested under power on site. Shipping also possible abroad. Inspection: Please note that, to avoid any misunderstandings, the item can and should be inspected and tested under power prior to purchase. Please ask any questions before purchase to avoid uncertainties. For general enquiries or to arrange an inspection appointment, I am available anytime via the phone number listed below or above. Subject to prior sale and errors in description. VAT will be itemized separately on my invoices. Shipping via freight forwarder.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Grafisk Maskinfabrik tilbageruller/skærer Tedpfx Abjipvhnegjf

Leto izdelave: 2023, obratovalne ure: 1 h, Stanje: novo, Intersonik tunel-tip avtomatski stroj za pranje. Skrinje, kutije, kalupi, poklopci itd. možete prati u kontinuiranom i automatskom stroju za pranje. Idealan za prehrambenu industriju. Tjdpfx Abed Tnuaegjf Idealan za automobilsku industriju. Stroj za pranje KLT sanduka, pranje sanduka, pranje plastičnih kutija, automatski stroj za pranje, pranje raspršivanjem, tunelsko pranje. Za dodatne informacije kontaktirajte nas.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Prima Industrie Platino 1530 laser cutting machine with only 4300 cutting hours This Prima Industrie Platino 1530 laser cutting machine, 4.0kW CO2, was manufactured in Italy in 2011 and installed at the end of 12/2011. Equipped with PRIMACH 20 L control unit. Tedjivg Hgepfx Abgsf

Leto izdelave: 2025, Stanje: novo, Ultrazvočna kad UEC 300 je industrijska rešitev za čiščenje velikih in težkih delov, ki so močno umazani. Naprava je opremljena s pnevmatskim dvigalom s kapaciteto do 200 kg. Delovna frekvenca znaša 28 kHz s sweep tehnologijo. Stroj obsega glavno ultrazvočno kad s tremi stranskimi ultrazvočnimi piezo pretvorniki ter dodatno nadglavno kad z oljnim separatorjem. Upravljanje poteka preko visokokakovostnega HMI zaslona na dotik z 3D prikazi obvestil. Celotna kad je izdelana iz kislinsko odpornega nerjavečega jekla AISI304 s debelino 2 mm. Tehnične lastnosti: Dimenzije platforme: 900x570 mm Največja nosilnost: 200 kg Uporabna višina: 400 mm Ultrazvočna moč: 3 kW (6 kW p-p) Ultrazvočna frekvenca: 28 kHz s sweep funkcijo Moč grelca: 9 kW OPREMA: Todjgd Uifspfx Abgsf 7" zaslon na dotik z 3D obvestili Avtomatski sistem za polnjenje vode Avtomatski način delovanja dvigala Senzor nivoja tekočine Senzorji položaja dvigala Senzor pokrova Garancija: 2 leti NA ZALOGI IMAMO TUDI DRUGE MODELE

Stanje: novo, The RSM 500 A is a conventional cylindrical grinding machine from the grinding machinery category, distinguished by its robust construction and long, supportive guideways. Its heavy-duty machine base made from high-quality cast iron ensures maximum stability and precise grinding results. The swiveling table and finely adjustable hydraulic feed guarantee smooth operation, while large graduated dials on the X-axis handwheel facilitate precise infeed adjustments. This equipment is complemented by a standard position display with linear scales, enabling easy monitoring of actual values. Versatile applications such as internal and external cylindrical grinding as well as taper grinding are supported by the hydraulically adjustable workhead. Buyers receive extensive standard accessories, including an internal grinding device and a work lamp. Experience outstanding performance and precision with the RSM 500 A – contact us now to optimize your grinding projects! Tsdsncdx Nopfx Abgef

Leto izdelave: 1988, Stanje: dober (rabljeno), številka stroja/vozila: 170167, Kapaciteta (mm): 8,5 x 50 Proizvodnja (maks.): 250 kosov na minuto Tedpfx Ajdwmciobgjf

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: SÇ 403 Alüminyum Pvc Kesim Makinası, • Complies with CE standards. • Designed for cutting aluminium and PVC profiles. • Hydro-pneumatic cutting operation. • Adjustable cutting speed according to the profile. • Capable of cutting at fixed angles to the right and left: -60°, -45°, -30°, -22.5°, -15°, 0°, +15°, +22.5°, +30°, +45°, +60°. • Pneumatic vertical and horizontal clamps. • Aluminium saw blade with a diameter of Ø600 mm or Ø650 mm, diamond-tipped. • Equipped with roller conveyor (3 metres, on both right and left sides). • Oil mist lubrication system. • Enables precision cutting thanks to 3 kW motor and hydro-check. Todporamrzofx Abgof