Obdelovalni center CNC

Okuma MX - 45 VAE

Stanje: dober (rabljeno), Leto izdelave: 1998, potovalna razdalja osi X: 762 mm, pomik osi Y: 460 mm, pomik po osi Z: 450 mm, proizvajalec krmilnikov: Okuma OSP -U 10M, hitrost vretena (min.): 12.000 obr/min, število mest v zalogovniku orodij: 32, Oprema: transportni trak za ostružke, The machine is well-maintained and in good condition; tools are included. Pgedpfouqi A Hjx Adyeg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 850 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 610 mm, premer struženja nad prečnim suportom: 500 mm, premer struženja: 725 mm, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, potovalna razdalja osi X: 260 mm, pomik osi Y: 80 mm, pomik po osi Z: 610 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 30 m/min, dolžina podajanja os X: 260 mm, dolžina pomika po osi Y: 80 mm, dolžina podajanja os Z: 610 mm, vrtilni moment: 250 Nm, prehod palice: 65 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year 2022, equipped with Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned/milled parts. - Integrated spindle motors - Counter spindle, water-cooled (preloaded roller guides), with Y-axis on main and counter spindle - Latest control technology: SINUMERIK ONE with ShopTurn conversational programming. Main Spindle: • Max. bar capacity: 65 mm • Max. torque: 250 Nm • Speed range: 0-5000 rpm Counter Spindle: • Drive power: 22 kW • Max. torque: 130 Nm • Speed range: 0-7000 rpm Turret: • 12-position VDI 30 turret, radial, with direction logic for up to 12 driven tool holders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: • Travel: +/- 40 mm • Hollow clamping cylinder incl. draw tube • C-axis for main/counter spindle • SINUMERIK ONE / OPERATE control • 22" multi-touch display • SHOPTURN • 3D simulation • Remnant detection • USB interface • Control cabinet air conditioning • Coolant system incl. coolant pump (3.5 bar) • Chuck wash (additional pump, 3.5 bar) • Parts ejector and coolant through counter spindle • Hydraulic unit • Interface for chip conveyor • Documentation and CE certificate Control language: German/English Electronic handwheel EMCO tool breakage and wear monitoring / SINUMERIK ONE Alternating spindle speed Counter spindle as tailstock: Enables the use of the counter spindle with installed live center for workpiece support. This allows shaft parts to be supported and machined, even on machines without a tailstock, using the counter spindle. Maximum thrust force is limited to 50% of the maximum axis force. EMCO PROFI-NET ROBOT INTERFACE: Interface for connecting robots (HARTING connector, Profinet communication, dual-channel/potential-free safety signals). Digitalization package for Sinumerik: Condition monitoring Pgsdpfxex E Dncj Adysg SIEMENS ONE interface for connection to MDE/BDE systems. Standard features include: • Machine on – AUX ON • Automatic mode • Production mode – program active • Program running and override between 95%–105% • Piece count pulse (M30) • Programmable pulse (M300) 3D machine data / MT65-G2: 3D machine data model included Pneumatically operated finished part catcher for gentle unloading of finished parts: Finished parts are transported either to a catch box (standard) or conveyor belt (optional). Max. finished part length: 175 mm Max. finished part diameter: 65 mm Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For connecting the SL1200 short bar feeder from EMCO. ...and more. Machine is available immediately!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, max. edgebanding thickness 0.2 - 15 mm Feed speed 12/18 m/min Heating-up time approx. 6 min Automatic magazine (strip magazine) Roll magazine Machine converted for ABS edges Quick heat-up granulate glue pot End trimming shear: 0.2 - 3.0 mm Flush milling unit Radius milling unit Operation via selector switch / pushbuttons Extendable roller support table Acoustic enclosure Machine length 3800 mm Used Machinery Information: Pgjdpfxofbr S Ro Adyog • Technical data subject to errors and prior sale. • Stated prices are ex-location, loaded free of charge. • The machine has been cleaned and function-tested. • All machines are purchased as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in written form. (We only respond to enquiries that include your full address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, OKUMA Euro Center V50 Year of manufacture: 2002 Control system: OSP-U100L Travels: X-axis: 1020 mm Y-axis: 510 mm Pgsdpfxerfw Nho Adysg Z-axis: 525 mm Table load capacity: 680 kg Clamping area: 1200 x 510 mm Tool changer: 20 magazine positions Chip conveyor

Stanje: rabljeno, Gear milling cutter Psdpodklt Nsfx Adysgg Module 8 20 degrees Length: 1800 mm Diameter: 120 mm Bore: 40 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, For Sale. Ficep Tipo G25LG. Psdsu Dw I Ejpfx Adyjgg Full description attached as a document. Year of manufacture: 2019 The infeed and outfeed lengths for this line are as follows: Infeed: 8 m Outfeed: 8 m If you require additional photos or information, please do not hesitate to contact us.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2008, številka stroja/vozila: LSP 100T, Proizvodna hidravlična stiskalnica s H-okvirjem 100t z vodenjem Proizvajalec Stenhoj Danska Leto izdelave 2008 Maks. pritisk sile 1.000 kN / 318 bar Stiskalni valj, dolžina hoda 400 mm Miza stiskalnice s T-utorom zgoraj 1.500x900 mm spodaj 1.500x1.050 mm Prehod stojala 1.700 mm Stanje kot novo, stroj je bil uporabljen le za poskusna zaganjanja in je od takrat skladiščen. Pgjdpfxjg Rn Efo Adyeg Vse informacije brez garancije. Brez stroškov prevoza.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Clamping force: 500 t Screw diameter: 80 mm Shot weight: 1620 g Tie bar spacing (vertical): 900 mm Tie bar spacing (horizontal): 900 mm Pgjdpova H Amjfx Adyjg Shot volume: 1779 cm³ Injection pressure: 1855 bar Platen dimensions: 1300 x 1200 mm Type: Horizontal Drive: Hydraulic

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: n.n.b., barvni kanali: 2, minimalna gramatura papirja: 40 g/m², širina papirja (min.): 100 mm, širina papirja (maks.): 520 mm, višina papirja (min.): 900 mm, največja višina papirja: 370 mm, skupna dolžina: 2.700 mm, skupna širina: 2.034 mm, skupna višina: 1.720 mm, zahteva za prostor dolžina: 3.700 mm, potrebna širina: 3.000 mm, potrebna višina: 2.220 mm, odčitek števca (črna): 1.150, vrsta vhodnega toka: Klimatska naprava, vhodni tok: 16 A, vhodna napetost: 200.210.220 V, Oprema: dokumentacija / priročnik, sledite prek namizja Pjdpfxjw R Enmo Adysgg

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 62.235 h, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 70 mm, skupna masa: 25.100 kg, The ENGEL Victory 2050/350 is a tie-bar-less injection moulding machine, manufactured in 2005. With a machine weight of 25,100 kg, it offers a maximum shot volume of 1,145 cm³ and a maximum injection pressure of 1,482 bar. The clamping force is 350 tonnes, and the screw diameter is 70 mm. Key technical data: - Year of manufacture: 2005 - Machine weight: 25,100 kg - Maximum shot volume: 1,145 cm³ - Maximum injection pressure: 1,482 bar - Clamping force: 350 t - Screw diameter: 70 mm - Mould installation height: 350–1,000 mm - Platen size: max. 1,200 x 1,100 mm - Ejector stroke: max. 250 mm - Control system: ENGEL - Total operating hours: 62,235 h - Additional equipment: - MORETTO Hopper Loader R10 C52 Psdpfsvxzw Njx Adyjgg - ENGEL ERC linear handling system - Longitudinal arrangement - Extraction cell with machine enclosure - Carton board feed - Two-stage roller conveyor The tie-bar-less design of the ENGEL Victory series allows free access to the mould area, enabling the use of larger moulds on smaller machines and thus increasing efficiency. This layout also offers advantages for automation, as robots and peripheral equipment can be integrated more easily. The machine is equipped with the ENGEL control system, renowned for its intuitive operation and precise process management. The servo-hydraulic technology ensures energy-efficient operation and reduces cooling water requirements. Additionally, the machine is fitted with a MORETTO dosing unit and an ENGEL linear handling system, supporting production automation and increasing overall productivity. With a total of 62,235 operating hours, the machine is in used but operational condition.