Vertikalni obdelovalni center

Okuma MU-400V

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, potovalna razdalja osi X: 750 mm, pomik osi Y: 600 mm, pomik po osi Z: 520 mm, proizvajalec krmilnikov: SIEMENS, največja hitrost vretena: 24.000 obr/min, moč vretenovega motorja: 35.000 W, število osi: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It offers a working area with an X-axis travel of 750 mm, Y-axis travel of 600 mm, and Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle with a maximum speed of 24,000 rpm and a tool magazine with a capacity of 120 positions. It features a DMG PH 150 L8 automation system. If you are looking for high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 70 EVO Linear machine we have for sale. Please contact us for further details. • Feed rate: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping surface 700 × 500 mm • Tool magazine: 120 positions • Through spindle coolant: high pressure 40 bar • Documentation: operating manuals and CE declaration Additional Equipment Podpeymcvmofx Agxjpr • Coolant tank with paper filter, 600 l • Touch probe • Chip conveyor • Electronic handwheel (remote control) • Pallet changer system DMG PH 150 L8, 8 stations (pallets not included) Technical Specification Taper Size HSK 63

Stanje: dober (rabljeno), Leto izdelave: 2004, Stroj je v dobrem delovnem stanju. Ppsdpfx Aeyufn Ijgxsr Krmilna enota: Heidenhain TNC 530 Deli, prikazani ročno, niso priloženi.

Stanje: rabljeno, Leto izdelave: 1999, x-travel 12,000 mm y-travel 3,600 mm z-travel 1,500 mm Spindle speed: 3,000 rpm Control: Heidenhain iTNC430 Milling head: 2 axes, indexed 2.5° Vertical (Y axis): 3,600 mm Cross (Z axis): 1,500 mm Longitudinal (X axis): 12,000 mm Ppjdpfx Agexwdygoxor Guideway length: 14,700 mm Guideway width: 1,400 mm Lowest milling position of spindle nose (measured from floor, head horizontal): 855 mm Low column version 870x900x2,625 mm: 3,000 kg High column version 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Spindle taper: ISO 50 / DIN 69871-A Speeds: 11.7; 231; 3,000 rpm Feed range: 2–2,500 mm/min Rapid traverse: X axis: 12,000 mm/min Z/Y axis: 15,000 mm/min Feed motor torque: X axis: 55 Nm Z axis: 37 Nm Y axis: 37 Nm Accuracy Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Air supply to machine: 300 L/min at 4.5 bar NOTE: Clamping plates and chip conveyors are not included in the scope of delivery. However, we can offer both used and new clamping plates and chip conveyors upon request.

Stanje: rabljeno, Leto izdelave: 2007, TECHNICAL DATA Travel range X 760 mm Travel range Y 510 mm Travel range Z 610 mm Table clamping surface 1020 x 510 mm T-slots / table 5 x 18 mm x 100 mm Distance spindle to table min./max. 150/762 mm Spindle taper steep taper DIN 69871 ISO 40 Spindle speeds 10 – 10,000 rpm Drive power (30 min/continuous duty) 11 kW Max. torque 236 Nm Constant power from 500 rpm Coolant tank 190 l Ball-bearing linear guides on X, Y, Z axes Rapid traverse X / Y / Z 30 / 30 / 20 m/min Feed rates programmable 3.0 – 7,600 mm/min Positioning accuracy +/- 0.01 mm Pedpfxjwud Afs Agxspr Repeatability +/- 0.005 mm Automatic tool changer (double arm) 24 Internal coolant supply Chip conveyor

Stanje: rabljeno, Leto izdelave: 2012, Funkcionalnost: omejena funkcionalnost, obratovalne ure: 43.100 h, potovalna razdalja osi X: 800 mm, pomik osi Y: 800 mm, pomik po osi Z: 550 mm, proizvajalec krmilnikov: Heidenhain iTNC530, model krmilnika: 530, hitrost pomika os X: 60 m/min, hitrost podajanja osi Y: 60 m/min, hitrost podajanja os Z: 60 m/min, hitri pomik na osi Z: 61 m/min, hitro pomikanje X-os: 61 m/min, hitri pomik os Y: 61 m/min,

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT40 BIG PLUS - Spindle drive power: 26 kW - Spindle speed: 15,000 rpm LINEAR AXES - Travel X/Y/Z axes: 560/640/640 mm - Rapid traverse speed (X/Y/Z): 60 m/min SWIVEL AXIS B - Travel range: 360° - Minimum increment: 0.001° TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 60 PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 400x400 mm - Number of pallets: 2 - Max. pallet load: 400 kg - Max. workpiece diameter: 630 mm - Max. workpiece height: 900 mm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Required floor space: 4100x2300 mm - Machine height: 2720 mm - Machine weight: 11,000 kg MACHINE HOURS - Operating hours: 3,700 h EQUIPMENT - Control: Fanuc 31 iB - Interface: Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Absolute linear measuring systems - Synchronized thread cutting - 3-color status lamp Ppsdpfjuhbv Ssx Agxsr - Coolant tank * with high-pressure pump: 25 bar * Internal coolant supply (IKZ) * With cabin washer - Chip conveyor: rear discharge - Spindle cooling - Tool measuring probe system - Workpiece measuring probe system: Renishaw OMP60

Stanje: rabljeno, Leto izdelave: 2008, Drehdurchmesser 1000 mm Umlaufdurchmesser 1250 mm Drehhöhe 500 mm Steuerung Siemens Sinumerik 840 D Werkstückspindelflansch Durchmesser 520 mm Werkstückspindel-Drehzahlbereich 0-440 U/min Gesamtleistungsbedarf 75 kW Maschinengewicht ca. 25 t Raumbedarf ca. 5100 x 3034 x 4500 mm Mit Schleifspindel Tischhübe: -Z1/Z2 Achse 1000 mm, -X1/X2 Achse ca. 1300 mm Tischgeschwindigkeit stufenlos regelbar: -Z Achse 0–30 m/min, -X Achse 0–50 m/min -Zustellgeschwindigkeit stufenlos regelbar 0,01–15 mm/min -Zustellung hubabhängig 0,0005–0,1 mm Psdew Rgcfepfx Agxspr -Werkstückspindelpositionierung C-Achse Ausstattung/Zubehör: -Schleifspindel -Abrichter Kaiser -Werkzeugmesstaster -Filteranlage -Mit Spüldüsenanschlüssen -2 Capto Halter -1 Satz Backen für Futter -technische Dokumentation

Stanje: dober (rabljeno), Leto izdelave: 2003, X 1740 mm, Y 766 mm, Z 660 mm 10.000 obr./min Deli, prikazani na roki, niso vključeni. Ppjdpewyblzofx Agxjr

Stanje: dober (rabljeno), Leto izdelave: 2007, Deli, ki so prikazane na fotografijah z roko, niso vključene. Tehnični podatki so prikazani na sliki. Podpfx Ajrpn Dvsgxjpr

Stanje: rabljeno, Leto izdelave: 2006, Technical details: X travel: 800 mm Y travel: 800 mm Psdpfxspumdcs Agxspr Z travel: 800 mm Spindle speed: 12,000 rpm Tool holder: SK 50 Control system: SIEMENS 840D ShopMill Tool changer: 240 positions Pallet size: 630 x 630 mm Spindle: 52 kW / 430 Nm Total power requirement: 87 kVA Machine weight approx.: 15 t Horizontal machining center with pallet storage, NC rotary table, Double pallet changer, High-pressure coolant system 40 bar, Preparation for Renishaw MP 10 infrared probe (without probe), Mechanical tool breakage monitoring, Minimum quantity lubrication (MQL), Through-spindle air blast, Electronic oil mist extraction, Electronic handwheel, TRANSMIT function, Accuracy package, BA 4, Laminated safety glass pane right side door, Including FASTEMS FPC 1000 pallet system for a total of 14 pallets, including setup station, shelf handling device, master computer, and 10 pallets Approx. 98,500 operating hours, main switch ON Approx. 45,500 spindle hours