Pasovni brusilnik
NKO PASOVEC 150/2

Stanje

Novo

Lokacija

Ahaus

Osnovni podatki

Oznaka stroja:: Pasovni brusilnik

Proizvajalec:: NKO

Model:: PASOVEC 150/2

Stanje:: novo

Cena in lokacija

Lokacija:: Ahaus

Pokliči

Podrobnosti ponudbe

ID oglasa:: A19924375

Referenčna številka:: 1125-823855

Posodobitev:: nazadnje dne 05.09.2025

Opis

Band width: 150 mm
Belt length: 2000 mm
Belt speed: 14.5 + 29.0 m/sec
Grinding surface: 460 x 150 mm platen table
Extraction nozzle diameter: 100 mm
Total power requirement: 3.0 kW, 100% duty cycle
Machine weight: approx. 90.0 kg
Dimensions (L x W x H): 1080 x 440 x 1000 mm

Robust belt grinding machine with 3.0 kW motor
Equipped with 2 belt speeds
Especially well-suited for grinding stainless steel

The free-standing belt grinder PÁSOVEC 150 is a 2-speed machine designed for efficient and economical grinding of surfaces, edges, and rounding of components made of carbon steel, stainless steel, aluminum, other non-ferrous metals, as well as wood and plastic. The machine is equipped with two workstations for contact and flat grinding. The height of the grinding arm can be adjusted to suit the operator’s body ergonomics. The machine is factory-equipped for extraction connection. Thanks to the lever tensioning mechanism, changing the abrasive belt takes just a few moments.

Further features:
- High grinding performance thanks to high belt speed
- Quick adjustment for horizontal and inclined position
- Continuous platen surface for optimal grinding of long workpieces
- Versatile use for grinding edges, flat surfaces, and radius grinding
- Graphite coating on the platen enhances the belt’s glide properties

Scope of delivery:
- Abrasive belt 150 x 2000 mm, grit 80
- Fold-up protective shield
- Grinding and support table
- Workpiece stop
- Dust extraction nozzle
- Separate emergency-off button
- Machine base frame
Dsdpfx Aoxabp Donuocn

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Registriran od: 2011

732 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+49 5939 ... oglasi

Faks:

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Naprava za oblaganje in obrobljanje FALKEN IK 1.2 MANU

Ahaus

879 km

Naprava za oblaganje in obrobljanje
FALKENIK 1.2 MANU

Pokliči

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Sheet thickness 1.20 mm ST Shaft length 140 mm Roller diameter 62.0 mm Throat depth 100 mm Total power requirement manual kW Machine weight approx. 50.0 kg Space requirement approx. 560 x 220 x 500 mm Exhibition machine - like NEW Has not been in use (!!) Dcodpfoxaciljx Anuen Special price on request Description: - 8 pairs of beading and flanging rolls included in delivery - For economical production of various types of beads - High precision due to precision-mounted shafts - Lower shaft with adjustable stop - Sturdy cast construction in modern design - Extended field of application thanks to 8 pairs of optionally available rolls - Upper shaft adjustable

Poglej podrobnosti

Mali oglas

Graver brusilni stroj Maschinenfabrik Baden-Baden FSS

Feucht

457 km

Graver brusilni stroj
Maschinenfabrik Baden-BadenFSS

Pokliči

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1988, Pantograph Cutter Grinder Manufacturer: Maschinenfabrik Baden-Baden Model: FSS Year of Manufacture: 1985 – overhauled, newly painted RAL 7012 basalt grey, RAL 7035 light grey Machine No.: 2992 Warranty: 12 months for single-shift operation from delivery date on the mechanics overhauled by us. Electrical and electronic components are excluded as they have only undergone a functional test. For machines located outside our North Bavarian sales area, travel expenses are to be borne by the customer. Accessories: - Grinding wheel with flange - Operating manual Dcsdpfxetqdqgs Anujn Includes new electrics On/off switch in new housing with undervoltage release coil for restart protection, e.g. in the event of a power failure or unplugging Used, as seen The machine is technically in accordance with the standards of its year of manufacture.

Poglej podrobnosti

Mali oglas

Tovarna za peskanje AGTOS TS 150-3.6-01-15,0

Emsdetten

859 km

Tovarna za peskanje
AGTOSTS 150-3.6-01-15,0

Pokliči

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 181199, Machine No.: 181199 Manufacturer: AGTOS Type: Drum Shot Blasting Machine Designation: TS 150-3.6-01-15.0 Turbines: 1 turbine with 15.0 kW Extraction air volume: 3000 m³/h Max. batch weight: approx. 1000 kg Dcsdporq Hmzjfx Anuon Type: Sinter plate filter Other Details Characteristics of the installed filter system Residual dust content: ≤ 1 mg/Nm³ Characteristics of the blasting machine Blasting media (material and size): Wire shot Blasting media amount (initial fill): approx. 1000 kg Workpiece temperature: max. 80°C Drum length: 900 mm Drum diameter: 800 mm Max. drum load: 250 kg Max. single piece weight: 5 kg Capacity: 150 liters Max. lifting capacity of loader: 480 kg Sound pressure level without noise protection: ≤ 85 dB(A)

Poglej podrobnosti

Mali oglas

Avtomatska stiskalnica za luknjanje z dvojnim stojalom HAULICK & ROOS RVD 63-800

Plettenberg

768 km

Avtomatska stiskalnica za luknjanje z dvojnim stojalom
HAULICK & ROOSRVD 63-800

Pokliči

Leto izdelave: 1981, stanje: rabljeno, Pressure: 63 t Stroke: 6–60 mm Strokes per minute: 90–550 spm Installation height (table bottom to ram adjustment top): 300 mm Table area: 780 x 600 mm Ram area: 807 x 460 mm Ram pin hole diameter: 40 mm Ram adjustment: 80 mm Total power requirement: 15 kW Machine weight approx.: 8 t Dcjdpfelp U R Ijx Anuen Space requirement (WxDxH): approx. 2900 x 2000 x 3000 mm Oil central lubrication IMCO press force measuring device

Poglej podrobnosti

Mali oglas

Stroj za rezkanje v orodjarni - Universal DECKEL FP 1

Bühl

587 km

Stroj za rezkanje v orodjarni - Universal
DECKELFP 1

Pokliči

Stanje: rabljeno, Leto izdelave: 1976, x-travel 350 mm y-travel 150 mm z-travel 340 mm Table clamping surface 600 x 210 mm Spindle taper SK 40 Spindle speeds 40 - 2000 rpm Feeds 5 - 500 mm/min Rapid traverse 1.2 m/min Total power requirement 1.9 kW Machine weight approx. 0.7 t Djdpfx Aowwwr Ejnujcn - Machine from training workshop - Accessories: fixed table, vertical head with extendable quill, 3-axis HEIDENHAIN digital readout, various short and long arbors, various collets, original DECKEL tool cabinet

Poglej podrobnosti

Mali oglas

Soest

974 km

Brusilnik za vrtalnike
FarmanFC-50 N

Pokliči

Mali oglas

Stroj za brušenje svedrov Rohde + Dörenberg MAY SS 75 A

Weiterstadt

632 km

Stroj za brušenje svedrov
Rohde + DörenbergMAY SS 75 A

Pokliči

Mali oglas

Stroj za upogibanje z vrtljivim kolesom FASTI 204-12-1.75

Ahaus

878 km

Stroj za upogibanje z vrtljivim kolesom
FASTI204-12-1.75

Pokliči

Stanje: zelo dobro (rabljeno), Sheet metal width: 1270 mm Sheet thickness: 1.75 mm steel Sheet thickness: 2.00 mm aluminium Sheet thickness: 2.50 mm plastic Sheet thickness (stainless steel): 0.80 mm Stand width: 1300 mm Opening width OW ~ 380 mm Working height: 900 mm Adjustment UW: 60.0 mm Max. bending angle: 180° Weight: approx. 200 kg Dimensions (L x W x H): 2000 x 520 x 1500 mm Good condition (!!) Bending rail, e.g. newly ground Equipment/features: - Robust manual folding / bending machine - Manual lifting via hand lever (incl. gas pressure damper) - Manual clamping of upper beam via side handwheel Dcjdpfx Aoxaa S Denuen - Manual adjustment of lower beam - Fixed-stop for bending angle, with analogue angle display - Upper beam with large opening width - Instruction manual / documentation * Machine link: ?machineno=1008-9355182

Poglej podrobnosti

Mali oglas

Weiterstadt

632 km

Tračni brusilnik
MetaboUR 33/2S

Pokliči

Mali oglas

CNC stružnica švicarskega tipa TRAUB TNL 12/7

Contamine-sur-Arve

667 km

CNC stružnica švicarskega tipa
TRAUBTNL 12/7

Pokliči

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turret heads: 2 Dcedouhaxfepfx Anujn UPPER TURRET HEAD - Number of positions: 6 - Number of driven positions: 6 - X-axis travel: 35 [mm] - Y-axis travel: -9.5/+28 [mm] - Z stroke: 48 [mm] LOWER TURRET HEAD - Number of positions: 6 - Number of driven positions: 6 - X/Z-axis travel: 35/79.5 [mm] FRONT UNIT - Number of positions: 4 - Number of driven positions: 4 - Driven tools speed: 10,000 [rpm] - X/Z-axis travel: 415/138.5 [mm] SUBSEQUENT MACHINING - Number of positions: 4 - Number of driven positions: 4 - Driven tools speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] ACCESSORIES - CNC control: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: LNS TRYTON HYBRID

Poglej podrobnosti

Oglašujte tukaj