Kombijevsko vozilo

NISSAN Cabstar 35.14 4x2 Kipper

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Basic information: Year of manufacture: 2005 Dimensions (LxWxH): 7580x4360x5120 mm Weight: 6000 kg Operating voltage: 400/415V 50Hz Power consumption: 20 kW Output at 20g/l: 1600 kg/h Touch screen control panel Feeding hopper with screw conveyor Complete documentation available in both paper and electronic forms (electrical schematics, CE conformity certificate, operating manual) Condition: very good (machine clean and well-maintained, used exclusively for expanding white polystyrene) Dkjdpferfn Rvjx Aplol For an additional fee, we can arrange transport as well as installation and commissioning of the machine by our technicians at a location specified by the customer.

Stanje: rabljeno, prevoženi kilometri: 835.837 km, moč: 309 kW (420,12 KM), prva registracija: 11/2010, vrsta goriva: dizel, lastna masa: 9.580 kg, največja dovoljena obremenitev: 16.420 kg, skupna masa: 26.000 kg, velikost pnevmatike: 315/80R22.5, konfiguracija osi: 6x2, medosna razdalja: 4.800 mm, gorivo: dizel, zavore: intarder, barva: rumena, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 5, vzmetenje: drugo, število sedežev: 2, skupna dolžina: 9.480 mm, Leto izdelave: 2010, gradbena višina: 3.850 mm, število postelj: 1, Oprema: ABS, klimatska naprava, nadzor oprijema, računalnik na krovu, spojka prikolice, tempomat, The Iveco STRALIS AS 260 S42 Y/FS-CM is a versatile, pre-owned truck, ideal for commercial use or export. First registered in November 2010 and with a mileage of 835,837 km, this vehicle is powered by a robust diesel engine delivering 309 kW (420 hp) and meeting Euro 5 emission standards. Equipped with an automatic transmission and a steerable/liftable axle, the STRALIS offers excellent maneuverability and versatile operation. The vehicle features a distinctive yellow metallic paint finish. With an overall height of 3,850 mm, width of 2,550 mm, and length of 9,480 mm, it is designed for heavy-duty transport and has a permissible total weight of 26,000 kg. Dodpfxor Uzgce Apljkl The specification includes two doors and two seats, air conditioning, and an INTARDER braking system for additional safety. The truck is registered as a commercial vehicle and has a green emissions badge (Euro 4), allowing access to low-emission zones. With only one previous owner and regular maintenance, the STRALIS is ready for high-performance applications. Steerable/lift axle Sale only to businesses (agriculture, freelancers, small and large enterprises) or for export. Subject to prior sale and errors.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 6.842 km, moč: 134 kW (182,19 KM), vrsta goriva: dizel, Leto izdelave: 2001, številka stroja/vozila: 3507TB, Oprema: pogon na vsa štiri kolesa, CATERPILLAR 950G v dobrem stanju, popolnoma delujoč, z veljavnim zavarovanjem in opravljenim tehničnim pregledom. Dkjdsxy Hkgopfx Apljl

Stanje: dober (rabljeno), Leto izdelave: 2002, številka stroja/vozila: 025137, Offer 24190 Technical Specifications: - Drilling capacity: 25 mm - Spindle taper: MT 3 - Quill stroke: 140 mm - 8 spindle speeds: 100 – 2,900 rpm - Min. / max. distance spindle / table: 110 / 405 mm - Lighting - Quick-action drill chuck - Coolant system - Machine vice - Machine base - Drive: 400 V / 0.75 kW - Required space (W x H x D): 400 x 1250 x 600 mm Dkjdpfowyl H Njx Aplsl - Approx. weight: 200 kg

Stanje: rabljeno, dvižna višina: 36.000 mm, Leto izdelave: 2023, Drive: Wheeled Unladen weight: 29,900 kg Lifting capacity: 27,480 kg Serial number: 783902 Front tyre condition: 100% Rear tyre condition: 100% Djdpsvban Ejfx Apljkl Transport dimensions (L x W x H): 3.9 x 2.55 x 3.9 Please contact PFEIFER GROUP for further information.

Stanje: rabljeno, Thread rolling machine - ORT RP18 2-roll thread rolling machine Dksdpfx Apouua H Rolol Swiveling spindle Overhauled with Siemens PLC See video The machine is powered and available in our warehouse Test run possible

Stanje: skoraj kot novo (rabljeno), Manufacturer: Thyssen / Krupp Model: KHP 130 /125 Equipped with 200 kW drive. Rotor diameter: 1,300 mm Rotor width: 1,250 mm Infeed opening: 1,370 x 990 mm For more detailed information, please refer to the PDF below. Dedpjg I R Rujfx Aplekl Included: – Infeed chute – Hydraulic opening system New spare parts in stock.

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 1.150 h, Funkcionalnost: popolnoma funkcionalen, Basic package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally positioned wear strips 24V electrical control – additional electric pump for actuating the following functions when the engine is stopped: raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP service doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan wheel Three-sided loading protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Audible start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: 260 kW drive train – EV 2-axle semi-trailer chassis unit Size L shredding system – 20 teeth Size L limiter Auxiliary hydraulic connection 35 – 80 l/min Hydrostatic drive Hopper extension 350 mm, watering system both sides Size L hopper wedge with brush NM Dkjdoxx N Dgspfx Aplsl 7 m rear conveyor Overbelt magnet neodymium Frame for 7 m overbelt magnet Delivery date by arrangement

Leto izdelave: 1993, stanje: dober (rabljeno), številka stroja/vozila: 479, Offer 22408 Technical Specifications: Dodjpxmxcjpfx Aplskl - Max. working width: 3050 mm - Max. cutting capacity (St 40): 10 mm - Throat depth: 270 mm - Cutting angle: ° - Manual adjustment of blade gap - Number of hydraulic hold-downs: 16 pcs - Motorized backgauge: 20 – 650 mm - Front angle stop and support arms - Strokes per minute (depending on cutting angle and length): 7 – 12 rpm - Hydraulic drive: 400 V / 22 kW - Table height: approx. 820 mm - Space requirement incl. backgauge, excluding front support arms: approx. W 3850 x H 2000 x D 2000 mm - Weight: approx. 8500 kg - Equipped with: electric foot switch, cutting line illumination

Stanje: rabljeno, Leto izdelave: 1989, Technical Details: Dedpfou Idkzox Aplskl Drilling capacity in steel (diameter): 28 mm Throat depth: 285 mm Drilling stroke: 165 mm Drilling capacity in cast iron: Ø 35 mm Spindle taper: MT 3 Spindle speed: 65 – 1,750 / 4x stepless rpm Feed: 0.1; 0.2; 0.3 manual/automatic mm/rev Max. spindle-to-table distance: 80 – 680 mm Table clamping surface: 500 x 370 mm Table rotatable: 360° Drill table adjustment: 600 mm vertical Column diameter: Ø 130 mm Total power requirement: 7.5 kW Machine weight approx.: 273 kg Machine dimensions approx. LxWxH: 0.9 x 0.6 x 1.9 m The machine is capable of thread cutting. Direction of rotation (left/right) selectable via foot switch and/or depth stop. Table is swivelable and height-adjustable.