Samovozna delovna ploščad

Niftylift HR28 Hybid, nur 1200 Std.

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material Hodpfefg E Hlox Ab Eefd 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice

Stanje: novo, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650x450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL PRICE!!! 2-Column Double Mitre Band Saw K-tech DG 62/45 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to angled cutting, feed control, and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for easy cleaning/disinfection) • Energy-efficient and low-vibration due to angled cutting • Ergonomic, safe, and free-standing control panel Hfodped Iipmefx Ab Eed • Frequency-controlled blade drive 15-100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Oversized drive wheels (520 mm each) • Clear mitre adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid approach down to start of material, or commence series cutting 4. Switch off saw blade 5. Raise frame just above the material 6. Vise opens

Stanje: rabljeno, Leto izdelave: 2016, številka stroja/vozila: 0605-240010, FICEP Flex FRC 1201 Notching System The Ficep FRC 1201 notching and cutting system is part of the modern Ficep Flex series of notching machines. This advanced CNC-controlled notching and cutting system is designed for the fast thermal cutting and notching of H, U, L profiles, flat bars, and square tubes. The steel profile is positioned precisely at the cutting location within the system by a pulling clamping measuring carriage via the roller conveyor. A robotic arm equipped with cutting units (oxy-fuel or plasma) cuts the profiles at the selected positions. The cut or notched finished components either fall into the collection tray or are pushed out of the system by the measuring arm. Thermal Cutting Units: The Ficep profile beam notching system Flex FRC 1201 is equipped for thermal cutting using both oxy-fuel and/or plasma technology. As the plasma power source, a Hypertherm HYPERFORMANCE PLASMA HPR 260 XD suitable for material thicknesses up to 32 mm is used. Thicker materials or bevel cuts greater than 32 mm are processed with the oxy-fuel cutting unit. Transport System: On the infeed side before the Ficep Flex FRC notching system, there is a chain drag cross transporter with a length of 11,150 mm. The profiles (workpieces) can be conveyed in both directions. Subsequently, the profiles are transported into the machine on a robust roller conveyor using a clamping measuring carriage. The system is designed for profiles up to 12 m in length and thus features 12 m roller conveyors with a conveyor width of 1,300 mm on both the infeed and outfeed sides. For the removal of finished components on the outfeed side, there are four chain drag cross transporters, each with a length of 6,450 mm, following the notching system. Mitrol CNC Control and Pegaso Software: The system is operated via a modern CNC control unit from Mitrol. The reliable CNC controller is manufactured by Ficep’s own supplier Mitrol and features Pegaso software, including remote maintenance capability and data transfer interface. Torit DCE Filter Unit Hsdetwm Ubjpfx Ab Eofd The extraction filter unit for dust removal is supplied by Donaldson Torit DCE. Safety: Provided by fencing and light barriers Max. profile cross-section: 1,220 x 600 mm Min. material length: 2,500 mm Working height: 865 mm Weight: 7,000 kg Weight of burner unit cover: 1,200 kg This modern Ficep Flex FRC 1201 notching system is in very good condition.

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11383, vrsta vhodnega toka: trifazni, delovno območje: 3.000 mm, skupna masa: 17.000 kg, vhodna napetost: 400 V, hitrost rezanja: 2.000 mm/min, skupna širina: 4.500 mm, skupna višina: 5.500 mm, skupna dolžina: 22.400 mm, širina gosenic: 1.400 mm, natančnost ponavljanja: 1 mm, teža obdelovanca (maks.): 30.000 kg, trajanje garancije: 6 meseci, vhodna frekvenca: 50 Hz, napetost odprtega kroga: 400 V, okoljska temperatura (maks.): 45 °C, Tweedehands SPC3000 – HGG Profiling Equipment B.V. Bent u klaar om uw werkproces te automatiseren, maar nog niet toe aan een grote investering in pijplasermachines? Wij hebben een interessante optie voor u. Deze SPC3000 (bouwjaar 2014, 40 ton) pijplasermachine is zeer veelzijdig. De machine is geschikt voor het bewerken van buizen met een diameter van 300 mm tot 3000 mm en is voorzien van vele extra’s: • 4x 10-tons pijpentransportwagens (300–2500 mm buitendiameter), waarvan één aangedreven pijpentransportwagen Hjdpferi Slmex Ab Ejfd • 2x 20-tons buisondersteuningen (2500–3000 mm buitendiameter) • Plasma-markeersysteem Kjellberg Finemarker • Slagstempel-markeersysteem • Geschikt voor buizen tot 18 meter lengte • Plasma-snijsysteem Kjellberg FF450 • Autogene snijfunctie • Extra touchscreen afstandsbediening aan hoofdaandrijving • 3-punts rookafzuigsysteem De SPC3000 is in gebruik bij ons eXperience Center en wordt onderhouden door onze beste technici op het hoofdkantoor in Nederland. Deze machine heeft zich ruimschoots bewezen in het profileren van buizen voor klanten uit veeleisende sectoren zoals offshore, pijpleidingen, staalconstructies en de scheepsbouw. Veel specialistische projecten zijn met deze machine uitgevoerd.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, For Sale. Ficep Tipo G25LG. Hfodpfx Aju Dw I Eeb Ejd Full description attached as a document. Year of manufacture: 2019 The infeed and outfeed lengths for this line are as follows: Infeed: 8 m Outfeed: 8 m If you require additional photos or information, please do not hesitate to contact us.

Stanje: rabljeno, Leto izdelave: 2019, obratovalne ure: 1.454 h, številka stroja/vozila: E300007203, konfiguracija osi: 4x4, vrsta goriva: dizel, Oprema: pogon na vsa štiri kolesa, Pogon: Kolesa Lastna teža: 7.920 kg Dvižni steber: Zgibna roka Dvižna zmogljivost: 250 kg Delovna višina: 1.800 cm Največji vodoravni doseg: 1.065 m Transportne mere (D x Š x V): 7,77x2,35x2,27 Za dodatne informacije se obrnite na SKUPINO PFEIFER. Hjdpfxstr Iywe Ab Ejfd

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: RoboRail, vrsta vhodnega toka: trifazni, delovno območje: 12.500 mm, najv. debelina pločevine: 20 mm, najv. debelina jeklene pločevine: 20 mm, skupna masa: 6.500 kg, vhodna napetost: 400 V, skupna širina: 3.200 mm, skupna višina: 2.600 mm, skupna dolžina: 20.000 mm, teža obdelovanca (maks.): 550 kg, dolžina mize: 12.500 mm, rezalni tok: 125 A, delovna dolžina: 12.500 mm, vrsta nastavitve višine: mehanski, vhodna frekvenca: 50 Hz, okoljska temperatura (maks.): 45 °C, RoboRail: All-in-One Robotic Plasma Cutting Machine We regularly hear from manufacturers that automation isn’t suitable for them because every job they do is different – but that’s exactly why automation is so important! With the RoboRail, every single component can be unique, and the plasma cutting machine will process and deliver parts one-by-one, directly from CAD files. Does your project require complex cuts? Send it to the RoboRail. Does your project involve a large variety of finished profiles? Send it to the RoboRail! This machine will be the workhorse of your shop, giving you time to focus on what your business does best! Easy Design Input: Import files from SDS2, Tekla, or any solid model. Or simply draw your design on the machine’s work interface. Optimal Material Utilization: No more waste thanks to HGG-optimized nesting. The more files you upload, the smarter the nesting process becomes. Hfodpfsq Nz Skex Ab Eod Seamless Processing: Upload your file and RoboRail takes care of the rest. Automatic material loading and precise start point determination. No operator intervention required during the cutting process. Perfect Results, Every Time: Get flawlessly cut steel precisely matching your CAD design. Experience uninterrupted production with seamless repeatability. RoboRail ensures your part is ready for the next production step. This machine is available in various configurations, including models with different maximum material input lengths. Based on your selected configuration, we can provide you with a tailored quotation. For a complete overview of available options, please refer to our brochure. Should you have any further questions, please don’t hesitate to contact us!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, For Sale. Ficep Tipo G25LG. Hfedpeu Dxbtjfx Ab Esd Full description is attached as a document. Year of manufacture: 2017 The infeed and outfeed lengths for this line are as follows: Infeed: 6M Outfeed: 3M If you would like more photos or information, please feel free to contact us.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013, obratovalne ure: 2.132 h, nosilnost: 230 kg, skupna masa: 7.321 kg, naslednji pregled (TÜV): 05/2026, transportna dolžina: 8.820 mm, transportna širina: 2.450 mm, transportna višina: 2.560 mm, Oprema: UVV varnostni pregled, pogon na vsa štiri kolesa, Delovna višina: 20,39 m Hjdpfotdnqtjx Ab Eefd Višina platforme: 18,39 m Pogon: dizel Stranski doseg: 11,81 m Lastna teža: 11.528 kg Dimenzije naprave (DxŠxV): 8,82 m x 2,45 m x 2,56 m Dimenzije platforme (DxŠ): 2,44 m x 0,91 m Nosilnost košare: 230 kg

Stanje: rabljeno, barva: drugo, Leto izdelave: 2017, obratovalne ure: 5.093 h, Pogon: gosenice Moč motorja z notranjim izgorevanjem: 105 KM (77 kW) Skupna dovoljena masa (GVW): 13.900 kg Proizvajalec motorja: ISUZU CE oznaka: da Serijska številka: HCMDAS50C00101056 Stroji na prodaj Prebrskajte našo spletno stran in si oglejte raznoliko izbiro strojev, ki so na voljo za nakup. Na zalogi imamo več strojev, kot jih je prikazanih na spletu, zato nas kadarkoli pokličite ali nam pišite. Vsi naši stroji so popolnoma vzdrževani in preverjeni za zanesljivost. Potrebujete slike? Kontaktirajte nas in jih boste hitro prejeli. Na voljo smo vam v nizozemskem, angleškem, francoskem, nemškem, španskem in ruskem jeziku. Hfsdsx Ry Ivjpfx Ab Eod Odkrijte našo široko ponudbo zanesljivih strojev.