Teleskopska delovna ploščad

Niftylift HR21 HYBRIDE 4x4 MK2 Valid Inspection, Hybrid, 4x4

Stanje: rabljeno, Leto izdelave: 2019, obratovalne ure: 770 h, številka stroja/vozila: 21/45420, Pogonski sistem Vrsta goriva: LPG Teže Lastna teža: 6.640 kg Funkcionalno Dvižni steber: pregibna roka Dvižna zmogljivost: 250 kg Delovna višina: 2.080 cm Dodatne informacije Stanje pnevmatik spredaj: 90 % Stanje pnevmatik zadaj: 90 % Največji horizontalni doseg: 1.300 m Transportne mere (D x Š x V): 6,62 x 2,27 x 2,18 m Gjdpeu I I U Dofx Afqjil Dodatne informacije Za več informacij se obrnite na PFEIFER GROUP.

Stanje: pripravljen za uporabo (rabljen), Forklift truck Manufacturer: Jumbo Model: J60 DC12 Diesel Year of manufacture: 1994 Load capacity: 6,000 kg Own weight: 9,260 kg Lifting height: 4,300 mm Approx. 25,000 operating hours Sale due to changeover to wheel loader All service and lubrication intervals have been fully documented and carried out in accordance with the inspection log! All filters (hydraulic, fuel, torque converter, air) have been replaced annually. Engine oil and oil filter changed every 250 operating hours. Only B0 diesel fuel has been used (no B7). Immediately available - fully operational Gedpfx Afovtwuaeqsil Location: Austria, near St. Pölten

Stanje: novo, Dimenzije D-Š-V 1860x595x150 mm Teža 125 kg Število predalov 10 kos. Voziček za orodje z dolžino 158 cm. Delovna miza z 10 predali, vrati in zadnjo steno. Skupne mere (povsem sestavljeno) 186 x 59,5 x 149 cm. Dimenzije samo vozička za orodje z vključenimi kolesi in ročaji 186 x 56 x 94,5 cm. Mere odprtega prostora za levo vrati 40 x 52 x 54 cm. Mere desnih zgornjih 4 predalov 36,5 x 50 x 7 cm. Mere desnega 5. predala 36,5 x 50 x 31,5 cm. Mere levega zgornjega predala 100 x 50 x 10,5 cm. Mere levega 2. in 3. predala 61,5 x 50 x 7 cm. Mere levega 4. in 5. predala 61,5 x 50 x 15 cm. Največja nosilnost koles 175 kg na kolo (skupaj 1050 kg). Največja nosilnost na predal 30 kg. Lastna teža cca. 125 kg Dimenzije pakiranja 167 x 66 x 106 cm. Giedpfxou Imlbo Afqel

Stanje: novo, Swing over bed: 410 mm Swing over cross slide: 240 mm Turning length: 1,000 mm Swing in the gap: 530 mm Giedpom Rlb Nefx Afqsl Spindle speed: 65 – 1,810 rpm Centre height: 205 mm Spindle bore: 52 mm Tailstock quill taper: MT 4 Total power requirement: 2.2 kW Machine weight approx.: 0.9 t Space required approx.: 1.9 x 0.8 x 1.3 m Leadscrew and feed shaft lathe with: • 3-axis digital readout fully installed • Electromagnetic main spindle brake • Automatic feed in longitudinal and transverse direction • Safety relay • Micrometer stop • Coolant device • 3-jaw chuck with 1 set each of hard and soft jaws • German operating manual.

Stanje: novo, Leto izdelave: 2025, Centre height: 250 mm Spindle bore: 82 mm Centre distance: 2000 mm Swing over bed: 500 mm Swing in gap: 710 mm Swing over cross slide: 300 mm Spindle speed range: 9 - 1600 rpm (24 steps) Spindle nose: DIN 55029 Camlock D1-8 Longitudinal feed range: 0.028 - 6.43 mm/rev; 93 steps Cross feed range: 0.012 - 2.73 mm/rev; 93 steps Metric threads: 0.5 - 224 mm; 48 steps Inch threads: 72 - 1/8 TPI; 49 steps Module threads: 0.5 - 112 mm; 42 steps Diametral threads: 56 - 1/4 DP; 42 steps Quill diameter: 75 mm Quill travel: 150 mm Quill taper: Morse Taper 5 Gedpsd I A Aujfx Afqsil Motor power: 7.5 kW Weight: 2,950.00 kg Dimensions: 3132 x 975 x 1270 mm

Stanje: potreben popravila (rabljeno), Leto izdelave: 2013, obratovalne ure: 33.439 h, • Volvo L180G • Year of manufacture: 2013 • Operating hours: 33,439 h • Gearbox after complete overhaul – 340 operating hours ago Giodpfxou Ef Hre Afqel • Engine compartment fire damage – condition as shown in photos

Stanje: rabljeno, prevoženi kilometri: 285.000 km, prva registracija: 06/2012, zavore: retarder, Oprema: ABS, elektronski program stabilnosti (ESP),

Leto izdelave: 1967, Stanje: dober (rabljeno), številka stroja/vozila: 7011/C, Table clamping surface: 310 x 1400 mm Table travel (X-axis): approx. 950 mm Table travel (Y-axis): 325/345 mm Table travel (Z-axis): approx. 500 mm Spindle speeds: 20 - 1500 rpm Feeds, longitudinal and cross: 18 - 620 mm/min Feeds, vertical: 18 - 620 mm/min Gijdpfx Aed Rxw Hofqjl Electrical connection: 380 V, kW Required space: 1900 x 1600 x 1750 mm Weight: approx. 1500 kg

Stanje: novo, Leto izdelave: 2025, TECHNICAL DATA Centre height: 330 mm Centre distance: Spindle bore: 103 mm Swing over bed: 660 mm Swing in gap: 840 mm Swing over cross slide: 420 mm Spindle speed range: 36 - 1600 rpm (12 steps) Spindle nose: ISO 702/II No. 8 Longitudinal feed range: 0.063 - 2.52 mm/rev (65 steps) Gisdpfx Afedzzw Ueqjl Cross feed range: 0.027 - 1.07 mm/rev (65 steps) Metric threads: 1 - 14 mm (22 steps) Inch threads: 28 - 2 TPI (25 steps) Module threads: 0.5 - 7 mm (18 steps) Diametral threads: 56 - 4 DP (24 steps) Quill diameter: 75 mm Quill travel: 150 mm Quill taper: Morse taper 5 Motor power: 7.5 kW, optionally 11 kW Weight: 3,050.00 kg Dimensions: 3135 x 1050 x 1450 mm

Stanje: rabljeno, Swing diameter over bed / mm Swing diameter over slide / mm Turning length / mm Gsdpfx Afsv Rgzwoqjil Total power requirement / kW Machine weight approx. / t Space requirement approx. / m