Omarica za orodje z vrtalnimi pušami

Niederberger mit Ersatzteilen für Werkzeugbau

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 630 mm, izvrtina vretena: 320 mm, premer struženja: 1.200 mm, premer struženja nad ležiščem sani: 930 mm, stružna dolžina: 3.000 mm, Lathe in very good technical condition, has seen very little use and was not utilized for machining pipes. Poręba TPL 90/3m lathe (also listed in market nomenclature as a variant of the TPK 90 series) is a textbook example of an Oil Country Lathe / Hollow Spindle Lathe. This model meets all the specific criteria for machines intended for the Oil & Gas sector: • Huge spindle bore (Big Bore): Machines in this version have a spindle bore diameter of 320 mm (approx. 12.5 inches), which allows for easy passage of thick-walled drill and casing pipes. • Dual chuck system: The headstock construction allows for the installation of two independent lathe chucks (front and rear, typically with a diameter of 28 inches), which clamp and stabilize the pipe at both ends of the spindle. • Optimal working range: The 3m designation defines the turning length between centers (3000 mm), which, combined with the swing over bed of 930 mm (hence the 90 in the model name), enables machining of massive pipeline elements. • Extreme rigidity: FUM POREBA products are renowned for their monolithic, very wide, and heavy cast iron beds, which effectively dampen the significant vibrations generated during thread cutting, especially with tapered threads. In international used machinery catalogs, this specific Poręba model is categorized directly under Oil Field Lathes. TECHNICAL DATA: Geometric parameters and machining ranges • Swing over bed: 930 mm / 36.6" • Swing over cross slide: 630 mm / 24.8" • Swing in gap: 1200 mm / 47.2" • Maximum turning length between centers: 3000 mm / 120" • Bed width: 585 mm / 23.0" Headstock • Spindle bore diameter (Hollow Spindle): 320 mm / 12.6" (classified in US nomenclature as 12.5" version) • Spindle speed range: 5 – 250 rpm or modified versions up to 710 rpm • Number of spindle speed steps: 18 Feed and threading system • Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev • Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev • Types of threads cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP) Tailstock Fedsy Sf Azspfx Apwogh • Tailstock quill diameter: 130 mm / 5.1" • Tailstock quill stroke: 300 mm / 11.8" • Quill taper: Morse No. 6 (MT6) Drive and overall dimensions • Main motor power: 22 kW / 29.5 HP • Total machine length: approx. 5500 mm / 216.5" • Total machine width: approx. 1750 mm / 68.9" • Total machine height: approx. 1500 mm / 59.0" • Total machine weight: approx. 8000 kg / 17,630 lbs

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Pressure: 25 tons Outreach: 160 mm Installation height: 500 mm Table surface: 650 x 650 mm Ram surface (round): 140 mm Stroke: 130 mm Power requirement: 4 kW Fsdpfx Apefcw Apowegh Weight: 2,000 kg Height: 2,100 mm Width: 1,100 mm Depth: 1,500 mm

Stanje: dober (rabljeno), Leto izdelave: 2003, stružna dolžina: 1.505 mm, Turning-milling center GILDEMEISTER GMX 400 linear Year of manufacture: 2003 Fgjdpfswzbq Tsx Apwjh Control: Sinumerik Power Line Technical specifications: Main spindle drive power ISM 90: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar capacity: 90 mm Number of magazine positions: 120 pcs. Milling spindle tool holder: HSK 63 Counter spindle drive power ISM 90: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar capacity: 90 mm B-axis / Milling spindle: Drive power: Speed: Torque: Tool holder: HSK 63 Lower turret: X-axis: Z-axis: Driven tool speed: Number of turret stations: 12 pcs. Tool holder: VDI 40 Equipment/accessories: - Chip conveyor - High-pressure unit with 20 bar - Preparation for 3D measuring probe - Counter spindle tailstock function - Automatic sliding doors

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Naprodaj sušilnik za živila – razvlaževalec. Uporabljen le nekajkrat. Fgsdeibwb Tjpfx Apwoh Najvišja notranja temperatura: 60 stopinj Celzija. Pretok zraka: 4500 m3/h. Ohišje za izdelke: 25 kosov. Potrebna moč: 220 V, 50 Hz. Dodatne podrobnosti so razvidne iz fotografij. Če imate kakršna koli vprašanja, nas prosimo kontaktirajte.

Stanje: novo, Cutting diameter: 225 mm Saw band length: 2455 mm Table height: 850 mm Cutting width: 245 x 150 mm Cutting speed: 45/90 m/min Saw band dimensions: 2480 x 27 x 0.9 mm Cutting capacity at 60° round: 90 mm Cutting capacity at 60° square: 90 mm Cutting capacity at 45° round: 145 mm Cutting capacity at 45° square: 145 mm Connection voltage: 400 Volt Total power requirement: 1.5 kW Machine weight approx. 0.2 t Dimensions (L x W x H): 1.43 x 0.72 x 1.7 m Mitre band saw - Mitre cuts up to 60° to the left - Vise with quick-release mechanism Fgjdpogxi D Tjfx Apwsh - Band tension control - Electric cooling system

Stanje: skoraj kot novo (rabljeno), Globinski vrtalni stroj Ryazan model PT295106 x 4000mm Proizvajalec: Ryazan Model: PT295106 Leto: 1985 Stanje: Rabljeno Zaloga številka: 2850 Fedpfxoxzp Rlj Apwegh Višina osi: 550mm Kapaciteta vrtanja v polnem materialu: 200mm Največja dolžina vrtanja: 4000mm Glava vretena – votli vreteno: 500mm Hitrosti vretena: 16-250 min⁻¹ Pogon glave: 50/75kW Največja dolžina vrtanja pred glavo: 3500mm Največja dolžina vrtanja pri uporabi 500mm votlega vretena: 4000mm

Stanje: rabljeno, Technical Specifications: Fgjdovc Awxepfx Apwjh Pressing force: 25 t Stroke: 500 mm Installation height: table/ram upper position: 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram speed, advance: 0.100 m/s Ram speed, return: 0.45 m/s Table dimensions: 630 x 500 x 75 mm Clearance in table: Ø 180 mm Ram clamping surface: 450 x 360 mm Ram bore (spindle hole): Ø 32 mm Height above floor: 710 mm Total power requirement: 8.75 kW Approx. machine weight: 2.2 t Approx. machine dimensions (LxWxH): 1.7 x 1.1 x 2.95 m Operation via two-hand control panel (and one-hand control in setup mode) Continuous and single stroke modes

Stanje: rabljeno, L + Z stružnica WEILER tip Condor 81 A Stroj. št.: 36553 Leto izdelave cca 1985 Razdalja med konicama: 750 mm Premer struženja nad posteljo: 330 mm Višina konice nad posteljo: 165 mm Premer struženja nad suportom: 180 mm Višina konice nad suportom: 90 mm Premer vretena: 40 mm Priklop čeljusti: kratki stožec DIN 55027 št. 5 Konica v konjičku: MK 3 Pomik puše konjička: 110 mm Hitrost vretena: 45 - 2800 vrt/min, 16 stopenj Pogonska moč: 3 kW Omrežni priklop: 400 Volt, 50 Hz - Hitrost vretena v 16 prestavah - 3-čeljustna stružna glava Ø 160 mm RÖHM z vrtalnimi in stružnimi čeljustmi - Hitromenjalni nosilec rezila Multifix velikosti B s 3 vložki - Avtomatski vzdolžni in frontalni pomik - Elektromehanska zavora vretena - Nujna zaustavitev - Rezervoar za hladilno tekočino s črpalko v podstavku stroja, brez napeljave do delovnega območja - Zložljiv varnostni pokrov čeljusti Fgodpfx Apsk S Ht Aswsh - Zaščita pred brizganjem - 1 kos vrtljiv centrirni koničnik - Električna shema in navodila za uporabo Mere D x Š x V: 1850 x 950 x 1400 mm Teža: 1100 kg Dobro stanje

Stanje: novo, Premer mize: 550 mm Nosilnost mize: 500 kg Območje vrtljivosti: 135 stopinj Nastavitev nagiba: ročna/strojna, motorizirana Največje število vrtljajev: 5 vrt/min, brezstopenjsko Nosilnost mize: 250 kg, vertikalno Skupna potrebna moč: 0,8 kW Fgsdpfoh D Svksx Apwjh Masa stroja: približno 245 kg Potreben prostor: približno 820 x 730 x 710 m Vrtljiva varilna miza z: - nožnim stikalom - možnost nagiba/vrtljivosti z roko - hitrost brezstopenjsko nastavljiva - prenos varilnega toka 250 amperov - luknja v plošči mize: 40 mm.

Stanje: rabljeno, Leto izdelave: 2004, Full bore diameter: 200 mm Drilling depth / mm Number of spindles / Technical Data Power: 129 kW Control: Siemens NC control Infinitely variable speed range: 2 - 300 rpm Feed rate range (in steps): 3 - 4500 mm/min Oil system capacity: 20,000 liters Maximum delivery rate: 1500 l/min Swing diameter in steady rest: 1100 mm Swing diameter over bed: 1250 mm Center distance: 11,000 mm Chuck clamping diameter: up to 1100 mm Max. workpiece weight with one tailstock: 10 t Clamping range of the two steady rests: 150 - 1100 mm BOZA clamping range: 1 = 200 - 400 mm 2 = 400 - 800 mm Dimensions Min. outer diameter: 406 mm Max. outer diameter: 850 mm Wall thickness: 10...150 mm Max. workpiece length: 11,000 mm Max. workpiece weight: 10 t Fgodpfx Apexgic Esweh Max. tensile strength: 800 N/mm² Specific cutting resistance (Ks): 2000...2100 N/mm² Machine data Machine length: 28,800 mm Center height: 560 mm Swing diameter over bed: 1120 mm Full bore diameter: 200 mm Core drilling diameter: 350 mm Boring diameter without pilot hole: 350 mm Boring diameter with pilot hole: 350 mm Headstock: Main drive motor: Siemens Type: 1 PH 7228 Performance data at 1,000 rpm: 113 kW / 1,079 Nm Performance data at 1,150 rpm: 129 kW / 1,017 Nm Main gearbox: Z-F shift gearbox Type: 2 K210 Switchable gear ratios: i = 1:1 i = 1:4 Fixed gear stage headstock: i = 11.68 Max. torque: 50,000 Nm Speed range I: 2...300 rpm Speed range II: 2...75 rpm