Used NEGRI BOSSI 800T injection molding machine - year 2010

NEA 8000H8400

Stanje: novo, Leto izdelave: 2025, Delivery ex works Turkey Bending length (A): 3050 mm Press force: 170 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Top tool: 1260 Top Tool 85° Bottom tool: 50, 35, 22, 16 Distance between uprights (B): 2550 mm Approach speed: 130 mm/s Working speed: 8 mm/s Return speed: 120 mm/s Crowning: Manual (CNC-motorized available at extra cost) X-axis travel: 750 mm X-axis speed: 250 mm/s Backgauge fingers: 2 pcs Front support arms: 2 pcs Oil tank capacity: 180 liters Main motor power: 11 kW Stroke length (C): 265 mm Installation height (D): 450 mm Blsdpfogu N Aljx Am Esp Throat depth (E): 410 mm Table height (F): 870 mm Table width (G): 170 mm Length (L): 4200 mm Height (H): 2800 mm Width (W): 2200 mm Weight: approx. 7500 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X), can be expanded with optional R+Z axes Eurostamp 2067 bottom tool (V:50, 35, 22, 16) Eurostamp 1260 top tool 85° Narrow table All-steel welded construction Promecam quick clamping system CNC-controlled motorized backgauge (X:750 mm) Adjustable backgauge fingers Selectable inch and metric system Ground and chrome-plated cylinders Swiveling control panel Foot pedal with anti-panic stop & emergency shut-off Side safety guards (secured with limit switches) Light curtain at rear of machine (900 mm) DSP laser finger protection system at front (CE) BOSCH/REXROTH or HOERBIGER/HAWE hydraulic system BOSCH/REXROTH or ECKERLE hydraulic pump Movable front support arms (2 pcs) Electronic components from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Paint finish: RAL 7035, RAL 5015 Optional, available at extra cost: - CNC-controlled R-axis (250 mm) - CNC-motorized crowning - Servo motor drive for backgauge system for X+R axis (Mitsubishi) - Special paint color per customer request Documentation in German or English CE conformity

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Technical data: Maximum clamping force: 3,500 kN Maximum holding force: 3,850 kN Opening stroke: 725 mm Minimum mould installation height: 400 mm Maximum mould installation height: 900 mm (extended) Clamping platen (H x V): 1,168 x 1,144 mm Clear tie bar distance (width x height): 830 x 830 mm Maximum mould weight: 6,600 kg Maximum weight on movable clamping platen: 3,800 kg Maximum weight on fixed clamping platen: 5,100 kg Ejector stroke: 250 mm Increased ejector force: 100 kN Maximum ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Maximum injection volume: 891 cm³ Maximum injection speed: 160 mm/s Maximum dosing stroke: 315 mm Maximum nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure programmable over dosing stroke Installed cylinder heating: 23.1 kW Material hopper volume: 110 l Weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demoulding stroke Y-axis: 900 mm Vertical demoulding stroke X-axis: 1,800 mm Robot console on fixed clamping platen Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell integration (special option includes): • Plastification cylinder with pneumatic shut-off nozzle without mixing element and without non-return valve; • Interface (communication and emergency-stop interface); • Software including functional screens for MuCell control; • Adapted nozzle chamber guard; • Position-controlled high-speed screw (analogous to ZE388) Conveyor belt: Width: 870 mm Useful width: 800 mm Length: 3,500 mm Height: 880-1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection moulding machine is fully equipped!! Condition: As new condition, only 5,290 operating hours Bodpfx Aoy Hmfyom Eolp

Stanje: dober (rabljeno), Leto izdelave: 1999, obratovalne ure: 95.239 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 173937, vpenjalna sila: 2.000 kN, premer vijaka: 55 mm, razmak između stupova: 520 mm, minimalna višina orodja: 250 mm, skupna dolžina: 5.100 mm, skupna širina: 1.800 mm, skupna višina: 2.200 mm, skupna masa: 6.630 kg, Oprema: dokumentacija / priročnik, The machine operated flawlessly until the last day before the arrival of the new machine. It is therefore in good used condition. The machine is being sold due to lack of space in the injection area and is no longer connected to power. Pump, injection unit, and clamping unit are leak-free. Bjdpfjv D Nxlsx Am Eslp The machine manual is available. Videos of the machine are available. Operating hours (pump): 95,239 Operating hours (automatic): 86,082 Repairs in recent years: - Filter changed annually - 05/2024: Fan in control cabinet replaced - 07/2023: New valve for Y201 and Y210 nozzle forward/back - 02/2023: New keypad installed (motor and heating panel) - 12/2022: Ejector and injection unit sealed, including new piston

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036946, vpenjalna sila: 800 kN, premer vijaka: 40 mm, delovna prostornina: 201 cm³, tlak vbrizgavanja: 1.860 letvica, injekcijska masa: 183 g, minimalna višina orodja: 150 mm, izmetalna sila: 22.000 N, hod izmetalca: 100 mm, odmični hod: 750 mm, vgradna višina: 400 mm, skupna dolžina: 4.750 mm, skupna širina: 1.670 mm, skupna višina: 1.850 mm, skupna masa: 5.600 kg, ogrevalna zmogljivost: 11,5 kW (15,64 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 735 mm, teža orodja: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base-level injection moulding machine, precisionMolding, represents the perfect entry-level solution for all-electric injection moulding, ensuring fast and innovative responses to market demands. This machine combines high performance, intuitive operation, and short delivery times. It can be utilised in a range of applications such as packaging, electrical and electronics industries, medical technology, and the automotive sector. Your benefits: – Optimised price-performance ratio for a wide range of applications – High energy efficiency thanks to the fully electric machine concept – Fast delivery through a base machine concept with a broad range of options available TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL SYSTEM  MC P1 with 15" TFT colour display with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Maximum mould opening force kN 120  Daylight (h x v) mm 470 x 420  Mounting platen (h x v) mm 610 x 560  Mould height min. – max. mm 150 - 400  Maximum opening span mm 750  Maximum mould opening stroke mm 350  Ejector drive electric Bedpfsud H Dmsx Am Eslp  Ejector stroke mm 100  Ejector force fwd/rev kN 22 / 22  Ejector speed fwd/rev mm/s 300 / 300  Maximum mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 40 / Standard  Effective L/D ratio 20.0  Injection pressure bar 1860  Shot volume cm³ 201  Max. shot weight for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticising rate (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heating capacity kW 11.5  Power supply V / Hz 400 / 50 3 phase with neutral conductor WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Wear-resistant plasticising unit  BluePower full insulation for plasticising cylinder  Open nozzle  Air valve, single (BWAP)  Pneumatic operation for hot runner shut-off, single  Electrical cascade interface, 4-fold  Euromap interface (handling), E18, E63  Euromap interface (central computer), E67, E77  Water manifold, 4-fold  Automatic central lubrication system  Adaptive Process Control (APC)  Injection-compression moulding circuitry  Graphic analysis package The machine is located at our plant in Parsdorf and is available at short notice. Further optional extras can be offered on request. We look forward to your enquiry.

Leto izdelave: 1998, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 12254 B521 860, overhead crane ± 10,500 mm x 12,500 kg Bsdpfxov Ip Ege Am Eelp

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2006, obratovalne ure: 33.107 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Vrhunski stroj iz proizvodnje v čistem prostoru (farmacevtska industrija) Stroj si lahko po dogovoru ogledate v obratovanju. Tehnični podatki Proizvajalec: Engel Tip: V 330H/80V/130 Combi 2-barvni stroj z vrtljivim stolom Serijska številka: 162036 Letnik: 2006 Delovnih ur: 33107 ur Nadzor: CC 200 Dodatna oprema - z vrtljivim stolom premera 820 mm - z robotom GEKU SR 500 ST, gib: x=600 y=1400 z=2500 mm - samo 33.107 delovnih ur - zaščitna ograja/varnostna kletka - horizontalni transportni trak - komaj zaznavne poškodbe laka / skoraj popolno vizualno stanje - v celoti deluje Dimenzije (D/Š/V): glejte risbo Teža: 10600 kg Delovanje: v celoti delujoč Stanje: odlično Zapiralna enota Vrsta zapiralne enote: hidravlična Zapiralna sila: 1300 kN / 130 ton Razdalja med stebri: brez stebrov Pot zapiranja: 606 mm Višina vstavljanja orodja: 250 mm Centriranje: 125 mm Maksimalna razdalja med ploščami: 850 mm Velikost plošče: 750 mm / 850 mm (V x Š) Brizgalna enota 2K Premer vijačnega valja: 25 / 22 mm Brizgalna teža: 72/ 35 g Brizgalni tlak: 2391/ 2066 bar Brizgalna prostornina: 79 / 38 cm³ Pot izmeta / sila: 61 kN / 100 mm Podrobnosti o robotu GEKU SR 500 ST Nadzor: Simotion Os X: 600 mm Os Y: 1400 mm, vertikalna Os Z: 2500 mm, horizontalna Osi A (nagib): SWM 45 Os C (vrtenje): Servo Grifer: SWS16 Os B: ni na voljo Stroj je takoj na voljo v našem skladišču v Hannovru/Nemčiji in je bil preizkušen. Garancija Garancija do prve uporabe. Nakladanje/pošiljanje Brezplačno nakladanje na tovornjak kupca ali brezplačna dostava (stroški transporta se povrnejo) / dostava po vsem svetu je možna iz našega skladišča v Hannovru / Nemčiji Financiranje – Na zahtevo – Možnost lizinga Bodpfx Aoub Umqsm Eolp Cena: Na zahtevo

Stanje: rabljeno, Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 113 kW (153,64 KM), vrsta hlajenja: voda, skupna masa: 943 kg, skupna širina: 2.100 mm, skupna dolžina: 2.270 mm, skupna višina: 1.330 mm, ogrevalna zmogljivost: 117 kW (159,08 KM), Oprema: kompresor, Rabljeni Carrier 30 RQS 120 z zračno hlajenim hladilnikom / toplotno črpalko na R410A. Popolnoma opremljen s tremi Copeland ZP182KQE-TFD-604 scroll kompresorji, ojačanim toplotnim izmenjevalnikom, Carrier PM 100-110mm ventilatorjem – 50 Hz – 0,53/0,18 kW – 720/500 RPM, Mecasem OOPSG001171100C sprejemnikom s prostornino 23,5 litra in električno krmilno omaro z Carrier Pro-Dialog+ prikazovalnikom. Specifikacije: Blagovna znamka: Carrier Tip: 30 RQS 120 Tip izdelka: Vodni hladilnik / toplotna črpalka Hladilno sredstvo: R410A Teža: 943 kg Dimenzije: 2270x2100x1330 mm (DxŠxV) Kompresorji: 3x Copeland ZP182KQE-TFD-604 Prikazovalnik: Carrier Pro-Dialog+ Število ventilatorjev: 2 Specifikacije ventilatorja: 50 Hz – 0,53/0,18 kW – 720/500 RPM Bsdsrlk E Nepfx Am Eolp Leto izdelave: 2013 Količina na zalogi: 1

Stanje: dober (rabljeno), Leto izdelave: 2004, Po želji, za doplačilo, lahko organiziramo naklad in prevoz (po vsej Evropi). Vse cene vključujejo DDV Ogled je možen po predhodnem dogovoru. Kontaktirajte nas, naše osebje vam bo z veseljem pomagalo. Možna je menjava ali odkup! Telefon: Mobilni: z veseljem tudi preko WhatsAppa) Spletna stran: Nakup/prodaja strojev Bodpexirqqofx Am Eslp NAKUP / PRODAJA PROIZVODNIH & OBDELOVALNIH STROJEV IN OSTALO. Potrebujete kakovosten, vendar cenovno ugoden stroj za obdelavo kovin za svojo proizvodnjo? Ali ga želite prodati? Za več informacij ali kontakt obiščite našo spletno stran,

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, vpenjalna sila: 500 kN, tlak vbrizgavanja: 2,2 letvica, For sale is an injection molding machine from Arburg, model 320 S 500-150. The machine is fully functional. Technical data: - Clamping force: 500 kN - Tie bar spacing: 320 mm x 320 mm - Mold height: 225-350 mm - Platen dimensions: 445 mm x 445 mm - Maximum platen opening: 550 mm - Screw diameter: 30 mm - Injection pressure: 2,200 bar - Weight: 2,250 kg On request and for an additional charge, we can organize disassembly, loading, and transport for you across Europe. Prices are subject to VAT. Viewing possible by appointment. Contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF MACHINING & METALWORKING MACHINES AND MORE Blsdpfxjqmn Ege Am Eep Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or to get in touch, please visit our website.

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: X82600, vpenjalna sila: 12.000 kN, premer vijaka: 150 mm, razmak između stupova: 1.200 mm, delovna prostornina: 12.193 cm³, tlak vbrizgavanja: 1.500 letvica, injekcijska masa: 11.584 g, odmični hod: 1.400 mm, Used Stork IMM 12000-19000 injection moulding machine. Bljdpfx Aowhkfysm Ejp