El. komorna peč s prisilnim kroženjem zraka

Nabertherm N 500 / 45 HA

Leto izdelave: 2002, Stanje: dober (rabljeno), številka stroja/vozila: SIKBK, DEMAG KBK Crane System – Crane Runway, approx. 10x6m Load Capacity / Lifting Capacity: 500 kg (0.5 t) Technical Data of the System: • Crane runway made of Demag KBK2 rails • System is delivered complete: KBK rails, rail connectors, trolley carriages, end stops, cable festoon system, suspension brackets/hangers, etc. • Including Demag DK2 500 kg chain hoist Crane is dismantled and immediately available. Psdpfsmqf Nbjx Agperd Used condition, see photos. Item location: 75053 Gondelsheim Shipping via freight carrier or pick-up by appointment only. Demag KBK1, KBK2, and KBK3 rails in stock! Other KBK systems also available: load capacities from 125 kg to 1600 kg. Please inquire about your required crane runway with overhang and dimensions.

Stanje: rabljeno, številka stroja/vozila: 51568, Pressure: 100 t Stroke: 0–500 mm Table surface: 800 x 650 mm Ram surface: 800 x 600 mm Table through-hole: 355 mm Table height above floor: 800 mm Installation height: 1130 mm Machine weight approx.: 5.7 t Throat depth: 310 mm Predpjcxxrrofx Agpod Space requirement approx. LxWxH: 1.2 x 2.0 x 3.67 m Installation height specified with ram at top dead center. Machine will be retrofitted to comply with new safety regulations: Safety distance: 270 mm / Overrun speed measurement: 135 mm/s, Overrun distance: 44 mm.

Stanje: rabljeno, Leto izdelave: 2001, Space requirement approx. 1450 x 1560 x 2620 mm Machine weight approx. 1.8 t The machine base is a heavy-duty welded construction. The coolant tank is integrated into the machine bed. The cross table is made of cast iron; the guideways are ground and scraped with adjustable gibs. The ram head is also made of cast iron, the guides are ground and scraped, and equipped with lubrication grooves. The ram head can be swiveled +/- 20 degrees. Stroke is adjustable via a side opening. The tool is positioned against the longitudinal stop. The machine is equipped with a mechanical stroke drive. The CNC rotary table controller is housed in the operator panel. The zero point can be set in any desired position of the indexing head with division options from 2-999 symmetric and 99 asymmetric divisions. Machine color: Green Indexing head color: Red Psdpfxewbi Awj Agpjrd --> Technical Data Adjustable stroke from 0 up to: 250 mm (No. 1) Distance column/tool holder: 425 mm (No. 2) Distance table surface/head: 430 mm (No. 3) Vertical ram adjustment: 430 mm (No. 5) Rotary table diameter (NC on axis A): 450 mm (No. 6) Longitudinal table travel (NC on axis Y): 250 mm (No. 8) Cross table travel (NC on axis X): 220 mm (No. 9) Bore at the table center: 135 mm (No. 10) Infinitely variable ram strokes per minute: 22-90 strokes/min Ram motor power (automatic brake, asynchronous): 3 kW Dimensions (ram fully raised; LxWxH): 1450x1560x2620 mm --> Digital operating manual available in German and English

Stanje: novo, Leto izdelave: 2025, The EVP-RA 550 vibratory finishing machine from ERBA features a flat-bottomed process chamber with integrated separation, designed for processing medium to large workpieces. It is equipped with an easily exchangeable screening unit. Unloading and separation take place via the integrated gate (manual/pneumatic operation). On request, reinforced springs and a more powerful motor can be installed for heavy-duty applications. The motor speed can be infinitely adjusted using a frequency inverter (optional). Thanks to its lateral discharge, the EVP-A 550 can be linked with other machines. The system can also be optionally equipped with a fully automatic PLC control. ERBA vibratory finishing systems are distinguished by their durability and resilience, which is largely due to the hot-cast polyurethane lining of the process chamber. Technical Data: - Gross volume: 550 L - Channel width: 390 mm - Unbalanced motor power: 4.0 kW - Speed: 1,400 rpm - Inner drum diameter: 1,400 mm Prices are net, plus the applicable statutory VAT and shipping costs. The images may show optional accessories, which are available at extra cost. If you are interested, we look forward to hearing from you. We will be happy to provide you with expert, no-obligation advice. Pedpfon Ut Ugex Agperd The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiation is conducted via telecommunications (e-mail, telephone, messaging portal). Initially, we will send you a non-binding offer, which also contains our general terms and conditions, legal notice, and right of withdrawal, prior to conclusion of sale/contract.

Stanje: novo, Electrically heated chamber furnace, manufacturer VEI Model: VEI_KO_EB Circulation: horizontal air flow Maximum furnace temperature: 650°C Pedpfxsipvgis Agpord Internal dimensions (W x H x D): 800 x 800 x 1000 mm Heating capacity: 51 kW Recirculation fan motor: 5.5 kW Connected load: 61 kVA

Stanje: rabljeno, Leto izdelave: 2007, Double-spindle machining center in 5-axis configuration (on both sides) Travel paths X/Y/Z = 600/600(975)/500 mm Number of spindles: 2 Spindle distance: 600 mm Rapid traverse: 45 m/min Spindle speed up to: 17,500 rpm Drive power: 38 kW Tool magazine: 2 x 72 tool pockets Tool holder: HSK 63 Prodetgu Ixjpfx Agpjd CNC control: Siemens 840D 1 x tool breakage control 2 x clamping bridge supports H75 mm 2 x clamping bridges for 5th axis Coolant system Knoll, 70 bar 1 x chip conveyor KB1000 1 x drilling head indexing unit 2 x tool length measuring system 2 x upgrade kit for torsion compensation A-/U-axis

Stanje: dober (rabljeno), Leto izdelave: 2000, Ram stroke – max. 2 – 300 mm Keyway width 2 – 32 mm Drive power 8 kW Strokes per minute 2 – 300 rpm Throat depth approx. 300 mm Max. installation height approx. 450 mm Automatic feed 0.01 – 0.15 mm Prsdpfxouayibj Agpsd Working speed 0 – 30 m/min Return speed 30 m/min Machine weight approx. 2.2 t Space requirement approx. 2.5 x 1.5 x 2.2 m The BALZAT keyseating machine offers the following advantages: - Infinitely variable adjustment of cutting speed with constant return speed, even during machining - Easy clamping of workpieces using standard clamping devices, no additional tooling required - Highest dimensional accuracy due to self-centering, centrally positioned tool holder - Feed rate can be changed during program operation - Machine base also serves as a reservoir for cutting oil - All components are easily accessible and replaceable

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Portalni žerjav, mostni žerjav, dvoranski žerjav, montažni žerjav, delovni žerjav, stropni žerjav, vozeči žerjav, žerjavni sistem - Oprema: z električnim verižnim dvigalom ABUS tip GM6 1250.6-1, talno upravljanje - Nosilnost: 1250 kg - Tiralnica: 8,7 m - Transportne dimenzije: 9280/850/H250 mm 1740/290/H320 mm - Teža: 1195 kg Podpfx Ajw R Sv Degpord

Leto izdelave: 2006, Stanje: pripravljen za uporabo (rabljen), FASTEMS processing machine MLS-XHD, year of manufacture 2006, in operational condition Pedpfx Asguk E Tsgpjrd Max. load per pallet: 6,000 kg Machine capacity: 5 units Pallet capacity: 25 units Available pallets: 19 units Loading stations: 2 units X-axis: max. 2650 mm Y-axis: max. 2300 mm Robot with grinding function: 1 unit System layout dimensions: 15 x 54 meters Year of manufacture: 2006 See also other offers from this seller.

Stanje: novo, Technical Data: Capacity: 200 t Installation height: 900 mm Max. working area: 1300 x 450 mm Ram stroke: 400 mm Advance speed: 6.4 mm/s Return speed: 11.04 mm/s Motor power: 7.5 kW Width: 2100 mm Depth: 1200 mm Height: 2850 mm Approx. weight: 2600 kg Features: - Laterally adjustable cylinder via rack, pinion, and handwheel - Spacious working area - Height-adjustable table - Torsion-resistant welded steel construction - Pressure gauge - Fine pressure adjustment - Additional hand pump Pedjpl T Diepfx Agpsrd Your Benefits: - One of the heaviest designs available on the market - Available with capacities up to 500 tons - Maximum performance and stability - Various frame widths available on request - Horizontally adjustable hydraulic cylinder, handwheel, rack, and pinion (from 160 t) Available with special equipment: - Fine pressure adjustment - PLC control - Worktable with T-slots for securing irregularly shaped components - Lateral hydraulic cylinder adjustment Support prisms available at extra cost.