Škarje za profilno jeklo

MUHR & BENDER HIW 1000/610

Stanje: rabljeno, Drilling capacity in steel (diameter): 40 mm Throat depth: 325 mm Quill stroke: 170 mm Table clamping surface: 730 x 590 mm Spindle speed: 130 - 1200 rpm Feed rate: 0.09 - 0.16 - 0.28 mm/rev Tool holder: Morse Taper 4 (MK 4) Total power requirement: 1.8 kW Blodswn T A Uspfx Afnjd Machine weight: approx. 0.7 t Dimensions (L x W x H): 1.2 x 0.8 x 2.15 m Drilling machine equipped with: Feed mechanism 2 gearbox speeds Forward/reverse operation Foot switch Machine lamp

Stanje: rabljeno, Column Drilling Machine ALZMETALL Type AB 4 SV Machine No. 14805 Year of manufacture: approx. 1980 Drilling capacity: 40 mm Spindle mount: MK 4 - short quill Throat depth: 340 mm Quill travel: 180 mm Table size: 710 x 560 mm Column diameter: 160 mm Spindle speed: 30 - 765 rpm, stepless Motor power: 2.3 and 3.4 kW, pole-changing Power connection: 380 Volt, 50 Hz - Spindle speed selectable via 2 motor speeds and stepless adjustment through variator gearbox - Intermediate gearing with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed: 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank Bljden N Ekcepfx Afnsd - Machine base with machined workpiece support surface - LED lighting system Required space (L x W x H): 1200 x 725 x 2050 mm Weight: 615 kg Good condition

Stanje: novo, Hydraulic Punching and Shearing Machine SAHINLER HKM 65 Applied force: 65 tons. Motor power: Bjdpfjggbuhjx Afnold 5.5 kW Dimensions: 1,700 x 900 x 1,670 mm (L x W x H). Weight: 1,600 kg PUNCHING: Punching capacity: Ø 2 mm x Thickness 20 mm Throat depth: 305 mm Punch stroke: 55 mm Working height: 1,030 mm SHEARING: Flat bars: 300 x 20 mm 375 x 15 mm Blade length: 380 mm Round bars: Ø 45 mm Square bars: 45 mm Angle profiles at 90°: 120 x 120 x 12 mm Angle profiles at 45°: 70 x 70 x 10 mm NOTCHING: Max thickness: 10 mm Width: 45 mm Depth: 90 mm Working height: 900 mm

Stanje: dober (rabljeno), Leto izdelave: 1988, številka stroja/vozila: 1669-110-1406, Offer 25094 Technical Specifications: - Drilling capacity in steel ST 60: 50 mm - Maximum drilling diameter in steel ST 60: 60 mm Blsdpfx Aowdvwtsfned - Spindle taper: MK 4 - Quill stroke: 225 mm - Spindle speed, infinitely variable: 35 – 950 rpm - Clockwise / counter-clockwise rotation - 3 automatic feeds: 0.1; 0.16; 0.25 mm/rev - Throat depth: 360 mm - Max. distance spindle – table / base plate: 740 / 1220 mm - Table with 2 T-slots: 700 x 590 mm - Height adjustable via rack and hand crank - Drive: 400 V / 2.2 / 4.0 kW - Space requirement approx.: W 700 x H 2150 x D 1150 mm - Weight approx.: 850 kg - Equipped with: - Emergency stop button - Work light - Coolant system

Stanje: rabljeno, Leto izdelave: 1986, Kotna jekla 120 x 13 mm Prebijalni stroj: pritisk 60 t Prebijalni stroj: izložnost 510 mm Prebijalni stroj: kapaciteta (premer x debelina) Ø 27 v 17 mm Škarje za pločevino: ploščati material 500 x 14 mm Škarje za pločevino: ploščati material 400 x 16 mm Škarje za pločevino: ploščati material 180 x 20 mm Škarje za pločevino: ploščati material 120 x 21 mm Škarje za pločevino: ploščati material 100 x 22 mm Bsdet D Nz Aepfx Afnsld Skupna električna moč 7,5 kW Teža stroja pribl. 2,5 t Dimenzije pribl. 1,8 x 0,9 x 1,8 m - Hidravlične škarje za profile – kombinirane -

Stanje: novo, Drilling capacity in steel (diameter): 40 mm Throat: 370 mm Drilling stroke: 200 mm Spindle taper: MT 4 Table: 580 x 460 mm Column diameter: 160 mm Speed range: 75 - 2020 rpm Feeds: 0.1 - 0.2 - 0.3 - 0.4 mm/rev Total power requirement: 1.5 kW Bledpfsf Nb E Rjx Afnod Machine weight approx. 700 kg Dimensions (L x W x H): 1.1 x 0.6 x 2.35 m High-quality column drill for industrial use. The machine is also suitable for multi-shift operation. • Machine base designed for clamping tall workpieces • Digital depth gauge • Gear head swivels 180° • Maximum smoothness thanks to hardened, ground gears running in an oil bath • Tapping function • Electromagnetic clutch for feed • Automatic feed • Electric motorized table height adjustment

Stanje: novo, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Semi-automatic sawing process with clamping–cutting–saw frame lifting to preset height after completion of the cut. Infinitely variable hydraulic monitoring of cutting pressure and feed rate at the saw band guide. This ensures optimum conditions for any sawing task, i.e. constant pressure for solid material and constant feed for thin-walled profiles. Particularly suitable for universal use with varying cross-sections, materials, and frequent miter cuts. The machine control system complies with CE standard 89/289. Technical Data: Cutting range in mm round/flat 90° 325 / 500 x 300 45° 300 / 300 x 300 30° 200 / 200 x 200 45° 300 / 300 x 300 Rapid approach of the saw frame to the material edge via pushbutton Manual miter adjustment from 45°–90°–30°, infinitely variable on scale The miter pivot point is the intersection of the saw band and fixed jaw, so there is no change in length measurement when the angle changes Hydraulic full-stroke workpiece clamping – CETOP hydraulic system At every saw frame angle, the material is clamped parallel at 90° Complete coolant system with electric immersion pump Central machine operation Saw band drive with automatic end-stop Movable band guiding arm, adjustable to material width Saw band idler wheels with carbide guides Chip removal brush, rotating with the band Saw band tensioning with torque wrench Bedpfxet D Azcj Afneld Paint finish: silver grey/blue grey (RAL 7001/ RAL 7031) Minimum remnant length: 60mm Cutting speed: AC frequency controlled drive, adjustable from 15-150 m/min steplessly at the control panel Drive motors: Saw band: 3.0kW; 400V, 50Hz Hydraulics: 1.1kW Coolant pump: 0.1kW Saw frame feed: Infinitely variable up to 300mm/min, hydraulically controlled Saw blade tension: mechanical with torque wrench Saw blade dimensions: 4200x34x1.1mm Working height: 750mm (without base elements) Weight: 850kg Dimensions (LxWxH): 1450x2350x1350mm

Stanje: rabljeno, Leto izdelave: 1968, Technical details: Drilling capacity in steel (diameter): 40 mm Throat depth: 380 mm Drill stroke: 240 mm Spindle taper: MT 5 Spindle speed: n.a. rpm Feed rate: 0.1 / 0.14 / 0.2 / 0.28 / 0.4 (manual + automatic) mm/rev Max. distance spindle/table: 200 – 800 mm Table clamping surface: 540 x 730 mm Table swivelling: 360° Drilling table adjustment: 600 mm (manual) Column diameter: Ø 220 mm Base plate clamping surface: W: 510 x L: 510 mm Total power requirement: 4.0 kW Machine weight approx.: 1300 kg Machine dimensions approx. L x W x H: 1.2 x 0.95 x 2.35 m Operation via control panel and/or foot switch Mechanical thread cutting Bledpfx Ajvpfzyofnsd Incl. machine vice

Stanje: rabljeno, skupna dolžina: 1.800 mm, skupna širina: 1.000 mm, skupna višina: 2.000 mm, Unladen weight: 2,000 kg Price: On request Thickness: 45 mm Maximum pressure: 70 tonnes Punching and shearing machine Model: Hydraulic Manufacturer: GEKA Type: Hydracrop 70S Performance: 70 tonnes Round cutting: 45 mm Shear bar: 45 mm Plate cutting: 450 x 15 mm Corner notching: 250 x 6 mm Includes several punches Machine dimensions: 1800 x 1000 x 2000 mm Machine weight: 2,000 kg - Documentation available: No - CE certificate available: No - Drive: Hydraulic - Punching force [t]: 70 - Notching width [mm]: 250 - Max. sheet thickness for notching [mm]: 6 - Round material cutting capacity [mm]: 45 - Cutting width [mm]: 450 - Max. sheet thickness for cutting [mm]: 15 - Transport dimensions: 1800 x 1000 x 2000 mm (L x W x H) - Transport weight [kg]: 2,000 kg Financial information: Blodpfx Afew Ryxmenjd VAT: The indicated price is exclusive of VAT. VAT/margin taxation: VAT is deductible for businesses. Delivery and trade-in possible at any time for all industrial equipment. Lukas van Rossum

Stanje: rabljeno, Leto izdelave: 1989, Technical Details: Bsdpfx Afeu Idkzenold Drilling capacity in steel (diameter): 28 mm Throat depth: 285 mm Drilling stroke: 165 mm Drilling capacity in cast iron: Ø 35 mm Spindle taper: MT 3 Spindle speed: 65 – 1,750 / 4x stepless rpm Feed: 0.1; 0.2; 0.3 manual/automatic mm/rev Max. spindle-to-table distance: 80 – 680 mm Table clamping surface: 500 x 370 mm Table rotatable: 360° Drill table adjustment: 600 mm vertical Column diameter: Ø 130 mm Total power requirement: 7.5 kW Machine weight approx.: 273 kg Machine dimensions approx. LxWxH: 0.9 x 0.6 x 1.9 m The machine is capable of thread cutting. Direction of rotation (left/right) selectable via foot switch and/or depth stop. Table is swivelable and height-adjustable.