Tovarna za drobljenje

muetek MRZ 630 - 18,5 kW

Demonstration machine with approx. 9 operating hours
Another machine available immediately (ex works Neckartailfingen)

*Options available at extra cost – see below

Included:
+ Profile rotor for higher throughput performance

We are happy to offer a free test using your material. For this, I invite you to visit us in Neckartailfingen. Alternatively, you can send your material to us via freight carrier and we will document the test with photos and videos.
Ffsdpfxjb Ny Eyo Abvow

Motor: 18.5 kW; 400 V - 50 Hz - 3 ph
Blades: 15 pieces, reversible multiple times,
Optional double blade row + €995 net

Rotor diameter: 260 mm
Control system: Siemens S7-1200 PLC
Cutting chamber opening 630 x 820 mm
Hopper volume approx. 0.6 cbm
Hydraulically operated pusher
Screen perforation of your choice (10–40 mm)
Extraction port Ø 160 mm
Weight approx. 1,300 kg
Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm
Moisture content: < 30% dry basis.

Standard equipment includes:
- V-rotor for maximum throughput
- Control cabinet with Siemens PLC
- Automatic star/delta start
- High-speed hydraulics
- Automatic shut-off when rotor idling
- Rotor speed 70–90 rpm for high throughput
- Timed control to avoid idle times
- Performance-enhancing step control for the hydraulic pusher
- Pertinax guides for hydraulic pusher
- Vibration-damping machine feet
- CE compliant

Optional shredder accessories for extra charge:

- Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net
- Eco Rings: + €1,980 net
(recommended for more than 20% hardwood)
- Double blade row + €995 net
- Special scraper + €990 net
(recommended for shredding veneer or paper, or materials less than 3 mm in thickness)
- Angled conveyor belt + €8,770 net
Angle: adjustable 0–60 degrees
Discharge height: approx. 2,000 mm
- Automatic overbelt magnet + €5,980 net
- Alternatively, fixed magnet block over conveyor belt for manual cleaning + €990 net (for low metal content)
- Conveyor and overbelt magnet control + €2,750 net
(Start and stop synchronised with shredder) Alternatively, manual start and stop of belts + €595 net

Raw material requirements:
- The moisture content (dry basis) must be below 30%
- Installation temperature: heated room with at least +5°C
- Metals and mineral contaminants such as sand, stones, etc., cause increased wear

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.