Orodje za izsekovanje Ø 75 mm

Mubea Mubea 75 5-9 Aufnahme 50N

Leto izdelave: 1981, stanje: dober (rabljeno), številka stroja/vozila: 3626, OFFER 21448 Technical Data: - Maximum working width: 2540 mm - Maximum cutting capacity (Steel 40): 4 mm - Motorized cutting angle adjustment - Cutting gap adjustment via scaled adjustment screws - Number of hydraulic hold-downs: 14 pcs - Motorized backgauge with positioning system: 10 – 1000 mm - Strokes per minute (depending on cutting angle and length): 23 per min - Hydraulic drive: 400 V / 7.5 kW - Table height: 1030 mm Cgsdpfxehhc Ixj Ahxst - Required floor space: approx. W 2500 x H 1630 x D 2150 mm - Weight: approx. 3600 kg Includes: - Pneumatically assisted sheet support - Front squaring arm and supporting arms - Electronic cutting depth adjustment - Cutting line illumination - Electric foot switch

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, Thalmann THAKO 30 Codpfx Ahsyl Tvuoxsgt Delovna širina: 8,20 m Zmogljivost upogibanja: 3,0 mm Letnik izdelave: 2010 NOV zaslon na dotik

Stanje: rabljeno, Leto izdelave: 1990, I-beam, flat: 140 x 140 x 13 mm I-beam, upright: 120 x 120 x 13 mm Cgedpfxjtt Ecde Ahxst Angle steel: 130 x 130 x 12 mm Round steel: 85 mm Bending capacity – flat bar: 125 x 25 mm Flat bar on edge: 65 x 65 mm Including various rollers: Pipe Ø: 219 mm (tool/roller Ø 535 mm) 140 mm (tool/roller Ø 420 mm) 273 mm (tool/roller Ø 520 mm) 203 mm 168.3 mm (tool/roller Ø 500 mm) 75 mm (tool/roller Ø 400 mm) 49 mm (tool/roller Ø 420 mm) 48.3 mm (tool/roller Ø 420 mm) 22.5 mm (tool/roller Ø 420 mm) 32 / 32.5 mm (tool/roller Ø 420 mm) 60 mm (tool/roller Ø 420 mm)

Stanje: novo, Saw blade diameter 350 mm Cutting range at 90 degrees: round 115 mm Cutting range at 90 degrees: square 95 mm Cutting range at 90 degrees: rectangular 180 x 95 mm Working height 925 mm Saw blade speeds 15+30+45+90 rpm Total power requirement 1.8/2.5 kW Machine weight approx. 0.38 t Space requirement approx. 0.8 x 1.0 x 1.85 m Manual vertical circular saw for mitre cuts from 60° left to 45° right. Cgsdpfefgpdlsx Ahxjt

Leto izdelave: 1972, stanje: rabljeno, številka stroja/vozila: 32 416, max. working width: 1530 mm for sheet thickness up to: 2.5 mm clamping beam opening height: 290 mm bending beam adjustment: 90 mm driven upper beam: 1.1 kW driven lower beam: 3 kW Cjdpfsy Np Aox Ahxegt back gauge: yes, mm weight: 2200 kg space requirement: 800x3000x1380 mm Usable working width (due to damage to the upper beam left and right, no longer accessible): 2000 mm

Stanje: rabljeno, Leto izdelave: 1975, Št. stroja: 1640 Teža: 280 kg Z primežem: da +++++ Prosimo, upoštevajte, da je stroj razstavljen in pripravljen za nakladanje. Zaradi tega demonstracija pod napetostjo ali izdelava videoposnetka ni mogoča. Naš oglas vsebuje že najbolj reprezentativne fotografije v najboljši možni kakovosti. Pošiljanje dodatnih slik žal ni mogoče. Codpfx Ahjh H Eqnjxjgt +++++

Stanje: dober (rabljeno), OFFER 70105 Technical Specifications: - Hole diameters approx.: 44, 45, 48, 52, 2 x 55, 2 x 58, 61, 66 mm - 2 x 68, 2 x 80, 81, 85 mm - Oblong hole dimensions approx.: 12 x 42, 12 x 50, 18 x 55 mm - Punch holder: 58 mm - Punch height: 54 + 58 mm - Adapter ring for punch - Die height: 30 + 40 mm Cgodpfx Ahog T S Axsxjt - Die outer diameter: 90 + 140 mm - Adapter ring for dies: 90 - 140 mm - Weight approx.: 90 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, Tip stroja: stroj za bodičasto žico Proizvajalec: VITARI Tip: MFS Cgodpsw N D Suefx Ahxot Leto izdelave: 1989 Premer nosilne žice: 1,6-2,8 mm Premer žice za bodice: 1,6-2,5 mm Zmogljivost – metri/min: 27-47 Razdalja med bodicami: 50-150 mm Odlično stanje

Stanje: dober (rabljeno), Included in delivery: 02x Rack uprights, used Material colour: Sendzimir galvanized Upright profile: 85 x 75 x 2.00 mm Upright height: 1,455 / 1,300 mm Upright depth: 1,100 mm 04x Beam levels (cross beams), used Material colour: orange Box section: 120 x 50 mm Clear span: 2,700 mm 08x Safety pins, used Design: fully galvanized 03x Wire mesh shelves, new Material colour: Sendzimir galvanized Design: laid-on shelf grids, folded on both sides Depth (direction of bearing bars): approx. 1,125 mm For upright depth: approx. 1,100 mm Clear span: approx. 965 mm Width: approx. 885 mm Support edge for beams: approx. 65 mm Mesh size: approx. 95 x 45 mm Wire gauge: approx. 4.5 mm Maximum load capacity: up to 800 kg (evenly distributed load) 03x Trapezoidal sheets, grade II Outside colour: RAL 8012 red-brown Inside colour: similar to off-white Sheet length: 1,500 mm Sheet width: 1,075 mm Effective cover width: 1,035 mm Profile: 35 / 207 01x Verge angle, new Length: 3,000 mm Material colour: RAL 8012 red-brown Dimensions: 100 x 100 mm Thickness: 0.75 mm Design: 90° bent Cododvgxijpfx Ahxsgt 25x Screws 5.5 x 40 mm A2 Max. drilling capacity: 13 mm With 16 mm sealing washer, drill tip and ETA-13/0183 approval 06x Screws 4.8 x 20 mm Galvanized, self-tapping For timber substructure Technical data for firewood shelter: Total width: approx. 2,900 mm Total depth: approx. 1,515 mm Total height: approx. 1,535 mm Storage volume: approx. 3.15 m³ Information: The images provided are sample pictures for illustrative purposes of the construction. The material colour of the uprights and beams shown may differ. General information regarding this item: This item is offered for pickup only. If transport or shipping is required, additional costs will apply. These can be requested from us, and will be quoted separately depending on delivery location and scope.

Stanje: novo, Drilling capacity in steel (diameter): 50 mm Cgodpfxofg U Tto Ahxst Drilling capacity in cast iron (diameter): 60 mm Tapping capacity: M36 Throat depth: 400 mm Quill stroke: 230 mm Spindle taper: MT 4 Spindle feed range: 0.1-0.2-0.3-0.4-0.5-0.6 mm/rev Spindle speeds: 54 - 1032 rpm Gear stages: 12 steps Column diameter: 200 mm Table surface: 550 x 550 mm Total power requirement: 3.0 kW Machine weight approx.: 0.72 t Space requirement approx.: 0.6 x 1.2 x 2.6 m Features: - Gears made of hardened and ground steel - Speed selection levers located at the front - Gear lubrication by automatic oil pump - Integrated coolant system - Machine lamp - Table can be rotated and tilted - Automatic feed with electromagnetic clutch - Handwheel for fine manual feed - Automatic tool ejector - Electrical controls integrated in the drill head - Emergency stop push button - Switch for clockwise/anticlockwise rotation - Height-adjustable chip guard with microswitch - CE marking