Rhoss Hladilne Naprave nakup rabljenega (17.309)

Stanje: rabljeno, Leto izdelave: 2024, Straw harrow with disc coulter, adjustable, lighting system, weight 2,150 kg Hedpfxotya Ims Ah Dofn

Stanje: dober (rabljeno), Filtration system extraction unit filter unit dust filter filter cabinet Infastaub Filter surface area 22.5 m² 900–1080 m³/h Equipped with new holders and filter bags Fully stainless steel Diameter 800 mm Height 860 mm Equipped with compressed air cleaned filter Hfjdpfx Aowyf Tpjh Dsn Equipped with control cabinet See our other listings

Stanje: pripravljen za uporabo (rabljen), General Location External storage Condition used Tank Volume 180,000 liters Max. excess pressure 1.5 bar Max. permissible operating temperature 18 °C Bottom type conical bottom Design suspended Heating/cooling jacket Heating/cooling available Double jacket volume 1,462.0 liters Max. permissible operating temperature 20 °C Cylinder temperature control half-pipe coil Hodpfx Ahjv Ry Tme Dofn Insulation Insulation available Technical data / dimensions Inner diameter 4,100 mm Outer diameter 4,500 mm Cylindrical height 12,000 mm Total height 17,000 mm Equipment Technical documentation Drawing Manhole / dome in the top head Nameplate

Leto izdelave: 2023, Stanje: kot nova (razstavni stroj), Technical specifications: - Load capacity: 1500 kg - Dead weight: 300 kg Hfjdpfx Ahod Iuqlj Don - Workpiece diameter (insertable): approx. 50 - 3000 mm - Roller diameter: 250 mm - Roller width: 50 mm - Rotation speed: approx. 100 - 2,000 mm/min - Two-pedal foot switch - Potentiometer for stepless speed control

Stanje: dober (rabljeno), Leto izdelave: 2020, Pallet racking, Stow, height approx. 2.70m, beam length 3.60m, 450 - 600kg per pallet, approx. 537 or 716 pallet spaces, - used - : Price ex location: €9,995 (net), dismantled, packed, and loaded! Manufacturer: Stow Model: Stow12 Year of manufacture: 2020 Frame height: approx. 2.70m Frame depth: approx. 1m Type: PLFB 12 Number of frames: 87 pcs Beam length: 3.60m Number of beams: 191 pcs Type: PNB0413 / 130mm Number of levels: 1 Knee height: up to 2,100mm Max. bay load: 1,800kg Max. shelf load: 1,800kg = 600kg / pallet with 3 pallets stored across, or 450kg with pallet deep storage and 4 pallets per level Incl. existing wire mesh decking for all levels (light-duty version) Incl. impact protection guards Condition: good Available: immediately Location: 21509 Glinde Hjdpfx Ahewankke Dsfn

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, nosilnost: 3.000 kg, lastna masa: 330 kg, Clamp Attachment Condition: Ready for use and fully functional Technical Condition: very good Description: In addition to this Riman model, we currently have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and side loaders in our warehouses in Hamburg and Gdańsk. Visit our website - sago-online. Leasing and financing options are always available at attractive terms. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide you with detailed advice regarding this PH100. P.S.: Our master forklift workshop specializes in the repair, servicing, overhaul, and custom conversions for forklifts from 8 tons and up. We can also offer your vehicle for sale on consignment at our facility. Hsdpfx Ahju Dzzpe Dsfn

Stanje: rabljeno, Leto izdelave: 2024,

Stanje: skoraj kot novo (rabljeno), Position 1 Turret Clamping System TS 125 Magnum Jaw width: 125 mm Clamping ranges: 1 x 476 mm 2 x 226 mm 4 x 108 mm Height: 780 mm Clamping stroke per sliding jaw: 64 mm Clamping force: 40 kN Price: €7,850.00 + VAT Position 2 4 pcs hydraulic machine vices Jaw width: 125 mm Overall length: 400 mm Price per piece: €850.00 + VAT Price for 4 pcs: €3,000.00 + VAT Position 6 Preci Tool NC, Type 125 Jaw width: 125 mm Overall length: 430 mm only 1 fixed jaw Price: on request Position 8 HILMA machine vice with rotary base mechanical/hydraulic Clamping force: 40 daN Jaw width: 125 mm Overall length: 430 mm Price: €850.00 + VAT Position 9 HILMA machine vice mechanical/hydraulic Clamping force: 50 daN Jaw width: 160 mm Overall length: 550 mm Price: €900.00 + VAT Position 10 HILMA machine vice mechanical/hydraulic Clamping force: 25 daN Jaw width: 100 mm Overall length: 380 mm Price: €650.00 + VAT Position 11 HILMA machine vice with rotary base mechanical/hydraulic Clamping force: 40 daN Jaw width: 125 mm Overall length: 430 mm Price: €850.00 + VAT Position 12 HILMA machine vice with rotary base mechanical/hydraulic Clamping force: 50 daN Jaw width: 160 mm Overall length: 620 mm Price: €1,050.00 + VAT Position 26 HILMA machine vice (exhibition version) Jaw width: 125 mm Overall length: 430 mm Price: on request Position 28 Hjdpfxjic Rnuo Ah Dsfn HILMA machine vice mechanical/hydraulic Clamping force: 25 daN Jaw width: 100 mm Overall length: 570 mm Price: €700.00 + VAT Position 32 Angle plate Clamping surface: 160 x 420 mm Price: €150.00 + VAT Position 33 Angle plate with HILMA vice Jaw width: 125 mm and force transducer Price: €450.00 + VAT

Leto izdelave: 2005, Stanje: dober (rabljeno), Used thermocontainer; with signs of previous use Base dimensions: 800 mm x 800 mm Height: approx. 1800 mm 2 fixed castors, 2 swivel castors, can be locked with a padlock Load capacity up to approx. 400 kg Items come from company closure, roughly cleaned, fine cleaning to be carried out by the buyer from 100 units / €149 per unit Hjdpfoccxlgsx Ah Defn Minimum purchase: 50 units / €179 per unit Dealer price on request

Leto izdelave: 2023, Stanje: kot nova (razstavni stroj), Technical data: - Load capacity: 15,000 kg - Dead weight: 960 kg - Workpiece diameter (insertable): approx. 50 – 3,200 mm Hsdjd Iuqajpfx Ah Dofn - Roller diameter: 250 mm - Roller width: 240 mm - Rotation speed: approx. 100–2,000 mm/min - Two-pedal foot switch - Potentiometer for stepless speed control

Stanje: zelo dobro (rabljeno), Wir verfügen über eine große Anzahl dieser identischen Geräte. Sie stammen aus den Hospitality-Bereichen des Wembley-Stadions. Hfodsu S E Tvepfx Ah Djn

Stanje: zelo dobro (rabljeno), Indramat DDS02.2-W100-BE12-01-FW Digital AC-Servo Controller DDS02.2-W100-BE12-01-FW Indramat Digital AC Servo Controller 100A Cooling type: Air Hodpfxsd Ndy Uj Ah Dofn More items – new and used – available in our shop! International shipping costs on request!

Stanje: rabljeno, Leto izdelave: 2006, approx. 3900 ha Lower link mounting, disc section, harrow, tramline computer / front packer / Hedpfjtvfz Iex Ah Dsfn

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 2 h, skupna dolžina: 12.200 mm, skupna višina: 2.890 mm, skupna širina: 2.440 mm, moč: 1,65 kW (2,24 KM), gorivo: dizel, Oprema: Na voljo je tipska ploščica, These are three emergency power generators, each with 2000 kVA/1600 kW continuous output at cos-phi 0.8. Voltage: 10 kV, Frequency: 50 Hz. An inspection is possible in 49733 Haren. Engine manufacturer: Perkins Alternator manufacturer: Stamford Design: 40" soundproof container with a noise level of 85 dB(A). Dimensions: 12,200 x 2,438 x 2,890 mm (LxWxH) Weight: approx. 35,000 kg The datasheet (in DE and EN) is attached. Each container is also equipped with a 2,000 L tank for initial diesel supply. The generators are regularly tested under load. Hfsdpfx Aeqqhuyjh Djn

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 360 kW (489,46 KM), vrsta goriva: hibrid, skupna masa: 35.000 kg, Leto izdelave: 2025, *Vsi naši izdelki so izdelani skrbno in vključujejo 1-letno garancijo! *Vgradnja in usposabljanje operaterja BREZPLAČNO Fabo goseničarski udarni drobilnik FTI-110 je popolnoma mobilen sistem, ki deluje na hidravlično gnanih gosenicah s hitrostjo 1 km/h ter vključuje vibrirajoči grezni podajalnik, udarni drobilnik, zložljive transportne trakove, krmilno enoto ter električni generator. Hfsdswx Hvvjpfx Ah Djn V sodobnih razmerah in tehnoloških procesih se podjetja vedno bolj osredotočajo na povečanje učinkovitosti svojega poslovanja. Pri tem upoštevajo dejavnike, kot so operativnost uporabljenih strojev, nizki stroški in potrebe po zaposlenih. Naši goseničarski drobilniki lahko dosegajo visoko zmogljivost tudi v najzahtevnejših rudniških okoljih zaradi posebno zasnovanega ogrodja in kompaktne strukture. Možna je prilagoditev naših goseničarskih sistemov z uporabo čeljustnega drobilnika, primarnega ali sekundarnega udarnega drobilnika oziroma stožčastega drobilnika. Prednosti goseničarskih drobilnikov: - Robustne gosenice omogočajo dostop do mest, ki so običajnim strojem nedosegljiva. - Ustreza dimenzijam in ravni hrupa, da je primeren za drobljenje gradbenih odpadkov v urbanih okoljih. - Poraba goriva generatorja in pogonskih gosenic je zelo ekonomična. - Vzdrževanje in upravljanje sistema je enostavno zahvaljujoč napredni krmilni programski opremi. TEHNIČNE SPECIFIKACIJE: Model: FTI-110 Zmogljivost proizvodnje: 200–240 ton na uro Največja vhodna velikost: 500 mm Tip drobilnika: udarni drobilnik Velikost: 1000 x 1000 mm Nastavitev odprtine (CSS): 0–50 mm Skupna moč: 360 kVA Teža: 35.000 kg - Nizki investicijski in obratovalni stroški – Ni potrebna priprava podlage – Enostavna uporaba in vzdrževanje – Preprosta montaža in demontaža ZA VEČ INFORMACIJ NAS PROSIMO POKLIČITE!

Leto izdelave: 2023, Stanje: novo, Rotating device suitable for a component load of 40,000 kg. Component diameter (supported): 500 mm–6,000 mm. Rotation speed: 100–2,000 mm/min. Controlled via handheld remote (wireless option available upon request). Hfedpfx Ahoflmcxj Dsn

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, The MS+PS coolant separator from GRAFS is a device that combines the functions of both a magnetic separator and a filter fleece separator. This combination enables an exceptionally high level of coolant purification, which is extremely important in machining processes. The MS+PS separator is an ideal solution for machines that require very clean coolant, where contamination includes both magnetic and non-magnetic particles. By integrating magnetic filter technology with filter fleece filtration, this unit ensures top-quality purification with minimal energy consumption. DEVICE OPERATION: 1. Initial Stage (MS Magnetic Separator): - First, the coolant containing metal chips and other magnetic contaminants passes through the MS magnetic separator. - This separator is equipped with a rotating magnetic drum, which attracts and holds magnetic impurities on its surface. - The coolant, now cleared of metal particles, flows forward, while the contaminants are removed from the drum surface by a special scraper. 2. Main Stage (PS Filter Fleece Separator): - Next, the coolant flows through the PS fleece separator, where it is filtered by a special filter fleece. - This fabric retains fine particles, such as grinding dust or other contaminants. As contaminants build up, they create an additional filtering layer, increasing filtration efficiency. - When the accumulated contaminants reach the maximum allowable level, a float switch activates the automatic movement of the fleece, winding the used material onto a roller while feeding a new, clean section of fabric into place. The process operates automatically. Hfedpfx Asvtp Ewjh Den The separator is the ideal device for: - Lathes - Milling machines - Grinders Technical Specifications: Separator motor power: 0.09 kW, 900 rpm + i80 gearbox (connection cable included) Coolant pump motor power: 0.09 kW Filter capacity: up to 100 L/min Coolant pump capacity: 60 L/min Tank capacity: 150 L Separator drum diameter: 110 mm Drum rotation speed: 3 rpm Set weight with pallet: 150 kg Dimensions: 1000 mm x 900 mm x 650 mm MS separator material: Stainless steel, 10 mm base and 5 mm walls Drum: Stainless steel tube with 5 neodymium magnets inside Choice of fleece available: viscose, polyester, or polypropylene. Basis weight from 18 to 110 g/m² The separator is equipped with a robust, mobile tank with baffles, designed for optimal flow length of the coolant. Welded, steel, powder-coated. Grafs is a leading Polish manufacturer of industrial knife grinding machines.

Stanje: skoraj kot novo (rabljeno), Rokovalna oprema za linijo spajanja s prsti. Valjčni transporterji, širokopasovni in ozkopasovni trakasti transporterji, transporter za obrezovalno žago, obrezovalne žage itd. Glejte slike. Priložena dokumentacija. V dobrem stanju, proizvajalec Martek, Finska. Hjdpsd Duz Ejfx Ah Djfn

Stanje: rabljeno, Leto izdelave: 2024, 4 tine sections with 60 tines each, 410 L seed hopper, mounting frame with seeding unit / levelboard, sowing stop, lighting, drilling technology, 6 air-filled gauge wheels / 16x6.50-8, 6 m working width / Hfsdpfx Ahstu Uirj Djn

Stanje: rabljeno, Allen-Bradley PowerFlex700H frequency inverter, Series B, 132 kW, 232 A. S/N 12082007. Hsdovvk Sdjpfx Ah Dsfn

Stanje: rabljeno, Leto izdelave: 2023, Precision harrow 3000-125 with electronic empty-level sensor, track marker 3000, ISOBUS / Cataya Special with radar sensor international, electronic tramline control / support stand ----- CombiDisc 3000 fine disc section / toothed wedge ring roller Hfjdpfx Ahott Adao Den

Stanje: rabljeno, Leto izdelave: 2019, Support wheels, harrow, PTO shaft, computer / Hfsdpfx Aettlcwoh Dsn

Stanje: rabljeno, Leto izdelave: 2008,

Stanje: rabljeno, Leto izdelave: 2020,

Stanje: rabljeno, Leto izdelave: 2023, Exact harrow 3000-125 mounting kit, adjustable harrow, additional / electronic track marker 3000, AmaDrill 2 for Cataya, radar sensor / international, analogue work position sensor, electronic tramline control / control valve and hydraulic tramline system Hfodetgpggjpfx Ah Don