Motan

Motan

Leto izdelave: 2016, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Pralna linija za HDPE folijo Fgjdpfx Aastuui Dozok leto izdelave: 2016 0 delovnih ur (nikoli ni delovala) blagovna znamka: NEUE HERBOLD, D-74889 SINSHEIM sestavljena iz: mokri granulator tipa SM 450/600-S5-2 Frikcijska pralna naprava tipa FW 560/3000 transportni vijak Plavajoči rezervoar (ločitev plavajočega in potopljenega) tipa TB 500 mehanski sušilnik tipa TM 1005 Sesalna enota tipa MFT 55/500 Električno krmiljenje

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Seven Arburg injection moulding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83,365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 4,000mm/2,300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90,769h, clamping force: 1,000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions (X/Y): 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions (X/Y): approx. 4,700mm/2,350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86,595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2,340 bar, shot volume: 30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. Fsdstyyn Hspfx Aazogk 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59,885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 3,750mm/2,400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57,504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2,500 bar/2,340 bar, shot volume: 20cm³/30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions (X/Y): approx. 3,300mm/1,100mm. Documentation available. On-site inspection possible.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Used Bottling Line | Used Beverage Line | Soft Drinks NP 625 | ASEPTIC PET BOTTLING LINE Year: 1998 - 1999 Fgodstu Hy Njpfx Aazsk Speed: 18,000 Bph 1.5L Line composed of: Blow molder: SIDEL Model: SBO 16/16 ROUE Number of cavities: 16 Type: Rotary CHILLER AND COMPRESSOR NOT INCLUDED Preform elevator Preform unscrambler Monoblock: PROCOMAC Type: Aseptic Rinser Gravity filler Capper Cap type: pre-threaded plastic Sleeving machine Type: Rotary High capacity storage Steam tunnel Shrink wrapper: OCME Type: Film launch Palletizer: OCME Type: Push-type Layer pad inserter Pallet magazine Pallet wrapper: OCME

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 2980 x 1480 x 800 mm Table width: 1480 mm Table length: 2980 mm Fgsdofk Ailepfx Aazsk Weight approx.: 630 kg Special workbench systems of the SST, SFT, and SWT fix series serve as 3D clamping workstations for the efficient production of assembly, welding, and adhesive constructions, such as fixtures, railings, frames, etc. With the aid of the comprehensive range of clamping accessories (see catalog section: welding table accessories), these table systems can also be used as flexibly configurable fixtures, enabling high-quality production of small to medium series. The special workbenches feature a 16 mm (dual standard) or 25 mm (triple 24+1) thick working surface equipped with a Ø28 mm hole grid. Additionally, the tabletop includes a 100 x 100 mm grid marking for easy alignment of workpieces and fixtures. The table perforation allows the use of a wide variety of clamping elements and positioning aids. For special applications, the tabletop surface can be optionally fitted with stainless steel 1.4301, aluminum, plastic, or high-strength materials such as ST70, in deviation from the standard. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively in case of wear. This design makes the table system especially durable and sustainable in use. Price must be reconfirmed with manufacturer before ordering!!

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stock No. 2587k 1 used pelletizing line, function-tested, Throughput up to approx. 600 kg/h depending on material, consisting of: - 1 volumetric dosing unit - Extruder Plastmachines type PME 100 Fgsdpfx Aastvfhcozek Single screw Ø 100 mm – 35 L/D ratio Drive 134 kW – DC motor - 1x degassing zone - Melt filter BKG type K-SWE 121 RS – back flushable incl. Hydraulics 3 kW - Strand die head with 20 holes x Ø 3.5 mm - Strand cooling trough 400 x 4000 mm with strand guide rollers - Strand suction unit - Strand pelletizer SG 3000 - ResoTec control / switch cabinet Inspection by appointment – short notice possible Further pelletizing lines / extruders available & ready for demonstration at our Wuppertal facility

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, številka stroja/vozila: 403, Equipment / Further Specifications: Unwinding Unit: Roll Holder: single Max. Roll Diameter: 1000 mm Unwinding: automatic Thermoforming Machine: Max. Tool Size: 520 x 330 mm Max. Positive Forming Height: 15 mm Max. Negative Forming Height: 120 mm Film Width: 150 / 760 mm Stroke Length: 50 / 330 mm Max. HIPS Film Thickness: 1.8 mm Lower Table Stroke: 150 mm Clamping Force: 7,500 kg Installed Top Heater Power: 18.8 kW Installed Bottom Heater Power: 14.1 kW Idle Cycle Rate: 40 per min Main Drive Motor Output: 2.2 kW Film Feed Motor Power: 0.75 kW Operating Air Pressure: 7 kg/cm² Water Consumption at 12°C: ~30 l/h per 1 t Air Consumption at 7 kg/cm²: ~125 l/cycle per 1 t Installed Power: 50 kW Fodon D Ew Ispfx Aazegk 9x Tools: Article No. // Tool No. // Cavities // Description / Product: 3599 // 457 // 10 // Vending Cup; Capacity: 223 ml 593 // 460 // 8 // Coffee-to-go / Thermo Cup; Capacity: 300 ml / 12 oz 509 // 452 // 6 // Ice Cream Cup; Brimful: 140 ml / Usable Volume with 6 mm headspace: 120 ml 591 // 459 // 10 // Thermo Cup ⌀ 81/180 ml 740 // - // - // Standard Cup with Sealing Rim ⌀ 75-120 ml 3589 // 458 // 12 // Coffee-to-go / Thermo Cup; Capacity: 80 ml 595 // 456 // 10 // Vending Cup; Capacity: 150 ml 210 // - // - // Baking Tray / Technical Part / Plate or Tray 8000 // 455 // - // Granulate Cup 180 ml / Technical Part with Flat Sealing Rim

Stanje: rabljeno, Leto izdelave: 2001, vpenjalna sila: 60 kN, delovna prostornina: 224 cm³, tlak vbrizgavanja: 2.224 letvica, skupna masa: 3.350 kg, delovne ure: 60.790 h, premer polžastega transporterja: 18 mm, Minimum mold installation height: 15 mm_Maximum platen clearance: 575+ mm Payment terms: 100% prior to machine handover, net Manufacturer: Battenfeld Model: BA600-50CDC Condition: Refurbished Operating hours: 60,790 CLAMPING UNIT: Fgodpfx Aoh Tk Rvoazjk Clamping force: 60 t Opening stroke: 425 mm Minimum mold installation height: 350 mm Maximum mold installation height: - Tie bar distance (h x v): 320 x 320 mm Platen dimensions (h x v): 490 x 490 mm Centering rings (nozzle/ejector plate): 125 / 125 mm INJECTION UNIT: IU50 Screw diameter: 18 mm Shot weight in polystyrene: 20.4 g Stroke volume: 22.4 cm³ Injection pressure: 2,224 bar CONTROL: Unilog 4B Display languages: DE Operating manual: DE EQUIPMENT: Core pulls: Yes Air valves: - Hot runner zones: - Robot interface: Euromap 12 GENERAL DATA: Installed heating capacity: 3.6 kW Pump motor power: 11.0 kW Total connected load: Motor + heating Total weight: 3,350 kg Overall dimensions (L x W x H): 4.0 x 1.5 x 2.1 m

Leto izdelave: 1998, Stanje: skoraj kot novo (rabljeno), VAN DAM 568 COM III 8-Colour Cup Printer 560 COM III 8-colour cup printer, the machine is in good condition. The specifications are listed below. Machine type: Cup printing machine Brand: Van Dam Model: 560 COM III Fgodpfxsh Ha I Ee Aazsk Year: 1998 Colours: 8 colours Minimum cup diameter: 63 mm Maximum cup diameter: 203 mm Condition: In good condition If you have any questions regarding the machine or its specifications, please feel free to contact us at any time.

Leto izdelave: 2006, obratovalne ure: 15.000 h, Stanje: dober (rabljeno), For sale is an Erema 1007T Year of manufacture: 2006 Fodpfx Asumubyoazogk Operating hours: 15,420 Throughput: 250–350 kg/h The plant is currently processing HDPE, but it is also suitable for other plastics such as LDPE... The machine can be inspected during operation. A new extruder screw was installed in February.

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 83.000 h, vpenjalna sila: 350 kN, premer vijaka: 25 mm, For sale is an injection moulding machine from the manufacturer Arburg, model 320S 350-60. Fgjdpfx Aehhuq Aoazek Year of manufacture: 2000 Operating hours (automatic mode): 83,000 Screw diameter: 25 mm Clamping force: 350 kN Cylinder length: 60 Transport can be organised Europe-wide upon request and for an additional fee. Price incl. VAT Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE Are you looking for a high-quality yet cost-effective metalworking machine for your production? Or are you interested in selling your own? For further information or contact options, please visit our website.