Mora Primus 152012

Mora Primus 152012

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 900 mm, merilno območje osi Y: 1.500 mm, merilno območje os Z: 700 mm, Oprema: Na voljo je tipska ploščica, Zeiss CNC koordinatni merilni stroj Prismo 9/15/7 MASS VAST GOLD – RDS+VAST XXT Letnik izdelave: 2004 Modernizacija 2024, zadnja kalibracija 01/2025 Obseg merjenja: X = 900 mm, Y = 1500 mm, Z = 700 mm Tehnično in optično v odličnem stanju. Lastnosti in oprema: Krmilnik C99 z upravljalno ploščo BP26_SE Avtomatska temperaturna kompenzacija Senzor VAST GOLD Senzor RDS z VAST XXT Menjalnik tipalk MSR, 10-mestni, VAST Gold Menjalnik tipalk, 3-mestni, VAST XXT Menjalna plošča za tipalke, 8x VAST Gold Menjalna plošča za tipalke, 3x VAST XXT Referenčna tipalka Temperaturna tipalka Dodatna oprema za tipalke Kalibracijska kroglica Delovna postaja HP Z4 z operacijskim sistemom WIN11 in monitorjem Programska oprema Calypso Basic 2024 Guedpfx Aezk Id Asb Eeh Dodatne možnosti: Curve in QS-Stat Možnost nadgradnje Calypso in dodatnih možnosti Dodatna oprema in možnosti na voljo Na voljo v kratkem roku.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, skupna višina: 2.730 mm, največja dolžina izdelka: 1.470 mm, CMM machine from 2004. This Mitutoyo Crysta-Apex C 776 features a measuring range of 700 mm in both the X and Y axes, and 600 mm in the Z axis. It is equipped with advanced components such as a motorized Renishaw probe head and automatic temperature compensation. If you are looking for high-quality measurement capabilities, consider the Mitutoyo Crysta-Apex C 776 machine we are offering for sale. Contact us for further details. • Accuracy: MPEE = 1.9 µm + 4-L/1000 (with Renishaw TP200 probe) Gedpfjyhgbpsx Ab Eouh • Temperature Compensation: Automatic temperature compensation (temperature sensor) • Controller: UC200H (including scanning board) Additional Equipment • Probe head: Motorized Renishaw PH10M (7.5°), PHC10-3 head controller, PI200 interface • Probe system: Renishaw TP200 with 3× TP200 STD force modules • Probe changer: Renishaw SCR200 with 6 parking positions • Probe stylus set: Basic stylus kit (5 pieces) • Calibration equipment: Ceramic calibration sphere Ø 20 mm • Software: MCOSMOS v4.3 with CAD option; active modules: GEOPAK, CAT1000S, IGES, STEP, STATPAK, Scanning probe, Laser probe support, export of status information • Computer system: Industrial PC with Windows 10 operating system

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 11.000 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 500 mm, premer struženja: 240 mm, izvrtina vretena: 65 mm, največja hitrost vretena: 4.000 obr/min, pomik osi Y: 40 mm, moč vretenovega motorja: 15 W, Delovna dolžina 500 mm Guedpsycubtjfx Ab Eoh Maks. delovni premer 240 mm Hitrost vretena 4.000 min⁻¹ Premer izvrtine vretena 65 mm Število orodij 12 kos Pomik Y osi +/- 40 mm Krmilje FANUC 18 i TB Obratovalne ure 5.000 Glavna moč motorja 15 kW

Stanje: dober (rabljeno), Deli, ki so prikazane v roki, niso vključeni. Tehnične podrobnosti so prikazane na sliki. Guodpfjwb Eptex Ab Ejh Orodja v leseni škatli so priložena stroju.

Stanje: rabljeno, Leto izdelave: 2006, Merilno območje širina/dolžina/višina 1600/1800/1000 mm Dimenzije širina/dolžina/višina 2450/2940/3800 mm največja teža obdelovanca 3500 kg teža merilnega stroja 8500 kg Počasi premik 0 – 5 mm/s Način nastavitve 0 – 70 mm/s Serijski merilni način Os največ 300 mm/s Guodpfxezn Iucs Ab Eeh Vektor največ 425 mm/s Različica programske opreme Calybso 2023 / Paket servisnih posodobitev 2 – različica 7.6.08 Različni merilni senzorji Merilna glava

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 24.140 h, skupna masa: 10.000 kg, proizvajalec krmilnikov: FANUC, model krmilnika: 31i-NT-SmartX, število osi: 9, This 9-axis Nakamura NTJ100 turning-milling center was manufactured in 2017. It features a bar capacity of up to 65 mm and two spindles with maximum speeds of 4,500 and 5,000 rpm, respectively. The machine is equipped with a Samsys bar feeder, an Absolent extraction system, and numerous automated features such as through-spindle coolant supply, parts catcher, and automatic tool setting devices. Take advantage of this opportunity to purchase the Nakamura NTJ100 turning-milling center. Contact us for further information about this machine. • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: han-bei probe for automatic workpiece measurement (infrared or radio) for left and right spindle • Left and right with automatic swing-out function and 2x 4 measuring directions for rapid and precise tool setting via NC function Gjdpfxex D Iuzs Ab Eeuh • Operating hours: 43,399h • Coolant system: through-spindle coolant (CTS); coolant level float switch for machine stop at low level; additional through-spindle coolant flushing (left and right) • Bar capacity: Ø 51 mm • Type A parts catcher with collection tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic liner • Chuck air blow device for left spindle • Automatic power-off • Preparation for oil mist extraction unit with Ø 150 mm connection stub • Robot/automation preparation: pneumatic flap for robot handling at the top of the door, opening approx. 400 x 400 mm • Handwheel for manual travel of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Triple signal light The Samsys bar feeder with a 1.5 m bar loading capacity has the following dimensions: length: 225 cm + 43 cm intermediate guide, width: 120 cm (including loading ramp and control panel), height: 145 cm or 180 cm with open flap. The machine was primarily used for processing aluminum (95%). Additional equipment: • Samsys bar feeder including extension • Absolent extraction unit • Hinge belt swarf conveyor with interface, interval time control, and alarm analysis

Stanje: dober (rabljeno), Deli, ki jih oseba kaže z roko, niso vključeni. Gedpfxjwb Em Ss Ab Eeuh Tehnični podatki so prikazani na sliki. Orodja v leseni škatli so priložena stroju.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 17004A, Premer palice (maks.): 20 mm, Naprodaj: dve popolnoma delujoči stružnici Tsugami HS20M 5-axis. Vse je v delujočem stanju, stroja sta bila nedavno servisirana in tehnično pregledana. Vključeno: – različni nosilci orodij, – popolna tehnična dokumentacija. Gedpfx Abjyghcre Eeuh Stroja sta bila v glavnem uporabljena za proizvodnjo zobnih implantatov in sta bila kupljena na Švedskem. Če vas zanima, kontaktirajte me za dodatne podrobnosti, fotografije, ceno ali za dogovor o ogledu.

Stanje: rabljeno, TECHNICAL DATA Gsdpfx Abeu Uu Sys Ejuh - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 2.2 / 3.7 [kW] - Spindle speed: 200 - 10,000 [rpm] - Max. bar diameter: 20 [mm] - Minimum C-axis resolution: 0.001 [degree] SUB SPINDLE - Spindle drive power: 1.5 / 2.2 [kW] - Spindle speed: 200 - 12,000 [rpm] - Minimum C-axis resolution: 0.001 [degree] * Travel X/Z: 488 / 335 [mm] TURNING-MILLING SPINDLE - Travel X/Z: 289 / 305 [mm] - Travel Y: 75 (-15/+60) [mm] - B-axis stroke: 180 [degree] - Minimum B-axis resolution: 0.001 [degree] - Tool type: 15T - Spindle speed: 300 - 30,000 [rpm] - Spindle drive power: 3.7 / 5.5 [kW] TOOL CHANGER - Tool changer type: Umbrella - Number of tools in magazine: 24 SUBSEQUENT MACHINING Number of positions: 4 Number of positions: 3 WEIGHT AND DIMENSIONS - Machine weight: 2,700 [kg] MACHINE HOURS - Hours under power: 52,500 [h] - Operating hours: 11,639 [h] EQUIPMENT - Control: Fanuc 31i Model B5 - 3-color status lamp - Coolant tank: Hydro-Fluid HP3 * with high-pressure pump: 40 - 170 [bar] - Chip conveyor - Spindle cooling - Parts removal - Parts belt conveyor - Bar feeder: LNS EXPRESS 220 S2 - Fire extinguishing system* * Note: Functionality not guaranteed. Should be checked by a qualified company of the buyer. - Electrical transformer

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, Na voljo je CNC portálna koordinatna merilna naprava Mitutoyo. Pomik osi X/Y/Z: 1200mm/2000mm/1000mm, merilni volumen: 2,4m³, maks. teža obdelovanca: 2500kg, maks. višina obdelovanca: 1000mm, merilna tipala: Renishaw, število pozicij tipal: 20, merilna natančnost: 2,3+/-0,3/100µm, maks. hitrost pomika: 693mm/s. Dimenzije stroja X/Y/Z: pribl. 3400mm/2200mm/3600mm, teža: pribl. 6150kg, krmiljenje: Mcosmos-3 V4.3. Dokumentacija na voljo. Ogled na lokaciji možen. Guedszhnrbspfx Ab Ejh