2007 Mold Masters TMXL-3/3-0 zunanji vročevod 3 cone

Mold Masters TMXL-3/3-0

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Hot runner external 3 zones / possible 6 zones Hsdpfxeuykpus Al Dju

Leto izdelave: 2018, stanje: novo, Load capacity: max. 1,000 kg Coil inner diameter: min. 400 mm Hododx Ryyjpfx Al Dsu Coil outer diameter: max. 1,100 mm Coil height: max. 800 mm

Leto izdelave: 1988, stanje: zelo dobro (rabljeno), številka stroja/vozila: 3284, • Protective screens around the machine. (min.) Material thickness: 0.65 mm (max.) Material thickness: 2 mm Technical specifications: Maximum/minimum film width: 450/350 mm Maximum forming area: 430 x 160 mm Maximum draw depth negative/positive: 6/20 mm (22 mm negative upon request) Maximum top heating: 10.15 kW Motor drives: 3.0 kW Total connected load at 100% duty cycle: 12.7 kW Hodshbu E Hepfx Al Dsu Operating air pressure: 6 bar Maximum air consumption (depending on production): 1250 l/min Maximum water throughput: 1.0 m³/h COMPACT AND ROBUST – designed for high continuous output with easy operation. Ergonomic design (e.g. removal height 1300 mm). QUICKLY CONVERTIBLE – from 30° to 90° film feed, allowing for maximum material utilization for both rectangular and round lids (easy heater change). PRECISION – The precise forming table guidance via guide columns with ball bushings. The safe, reliable guarantee of precision. OPTIMAL CUTTING ACCURACY AT HIGH ENDURANCE LEVELS Cam-controlled functional sequence guarantees the highest repeat accuracy.

Stanje: rabljeno, Leto izdelave: 1988, številka stroja/vozila: 724306, Pressing force: 63 t Stroke rate: 400 strokes/min Sheet width: 180 mm Stroke: 10 - 80 mm Feed length: 150 mm Hsdocxxt Tepfx Al Dsu Strip width: 180 mm Control: KAISER Voltage: 380 V Space requirement approx.: 1.85 x 2.70 x 3.00 m + original Kaiser gripper feed Model ZR 18 D

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Oprema: Na voljo je tipska ploščica, Volumetric dosing systems – granules, powders, and regrind We offer a selection of fully functional volumetric dosing systems, ideally suited for the metering and conveying of granules, powders, and regrind materials. • Various models available: We stock a range of dosing systems that can be adapted to your material and application requirements. Hsdjvmylzspfx Al Dju • Testing available: Upon request, we will test the dosing equipment with your material to ensure it meets your specifications. • Reliable operation: All units have been tested and are ready for immediate use. Contact us, and we will help you find the right dosing system for your needs. Our team is happy to answer your questions or provide advice!

Stanje: pripravljen za uporabo (rabljen), Table diameter: 1000 mm, tool height: 80 mm, sealing pressure: 1.6 t, number of stations: 4, connected load: 3 kW, including tooling, machine has seen very little use. Hodpjif Elgefx Al Dou

Stanje: rabljeno, Leto izdelave: 2005, Stroj za brizgano oblikovanje Proizvajalec: Krauss Maffei Tip: KM350 /1900 C2 Letnik: 2005 Sila zapiranja: 3.500 kN Sila odpiranja orodja: 220 kN Potezna sila gibljive plošče: odpiranje: 105 kN zapiranje: 95 kN Plošča za pritrditev (š x v): 1.060 x 1.095 mm Čista razdalja (š x v): 710 x 710 mm Hod odpiranja orodja: 920 mm Minimalna višina vgradnje orodja: 380 mm Širina odpiranja: 1.300 mm Hod izmetalnika: 250 mm Izmetalna sila naprej/nazaj: 95 / 48 kN Motor črpalke: 75 kW Vgrajena grelna moč: 30 kW Hsdpfjxu Uvaox Al Dju Število regulacijskih con ogrevanja valja: 6 Število suhih ciklov: 1.550 1/h Količina olja: 720 l Mere in teže: Neto teža s krmilno omarico: približno 16,0 t D/Š/V: 6.510 x 2.040 x 2.380 mm Maksimalna teža orodja: 4.780 kg Brizgalna enota: Prostornina: 1900 Premer vijačnega gredi: 70 mm Brizgalni tlak: 1.778 bar Volumenski pretok: 1.047 cm3 Teža vbrizga na cikel: 953 g Pretok vbrizga: 527 cm3/s Število vrtljajev vijačnega gredi – standardno / opcija: 1/min. 285/349 Število vrtljajev vijačnega gredi – standardno ali stopnja 1: 95 ciklov Število vrtljajev vijačnega gredi – opcija ali stopnja 2: 117 ciklov Potezna sila šobe: 82 kN Polhidravlični sistem zapiranja z 2 paletama PV-regulacija za brizgalno enoto MC4 32-bitna krmilna enota z mikroprocesorjem Integrirana upravljalna konzola z barvnim zaslonom TFT in pogonom za diskete (3,5 palca) za varnostno kopiranje podatkov Plastifikacija: 1 komplet plastifikatorja za termoplaste v robustni izvedbi, premer vijačnega gredi 70 mm z protitokom in odprto šobo Polmer šobe: 15,00 mm Premer šobe: 6,00 mm 28926

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, obratovalne ure: 96.830 h, vpenjalna sila: 1.200 kN, premer vijaka: 40 mm, tlak vbrizgavanja: 1.300 letvica, injekcijska masa: 231 g, Engel Victory 500/120 Tech (145) without hopper General Information Item number: 145 Availability: In stock Year of manufacture: 2004 Brand: Engel Technical Data Shot weight: 231 g Clamping force: 1,200 kN Screw diameter: 40 mm Injection pressure: 1300 (2020) bar Tie bar spacing: Tie-barless Platen size: 740 x 680 mm Control system: CC200 Language: German Power: 41 kW Operating hours: 96,830 h Weight: 7,400 kg Dimensions: 5 x 1.7 m Hedpfx Alsvt Sbbo Dou Hopper: No Core pull: Yes Euromap interface: Yes

Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), Clamping force: 2500 kN, clear tie bar spacing: 630 mm/630 mm, opening stroke: 1150 mm, minimum mold installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control system: MC4. Machine dimensions: 5700 mm / 2200 mm / 2300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8 hot runner controllers, 4 core pulls, blow-out unit, pressure accumulator, hydraulic tie bar withdrawal device, energy saving mode, ALS interface, 20 mA interface, and color dosing device interface. On-site inspection possible, documentation available. Hjdpfouiykdox Al Dou

Stanje: novo, Transportni trak, transportni trakovi, transportni trak za ostružke. Hedpfx Alsd A Ttfs Dou Dolžina transporterja, širina traku, pogonska moč, obdelava površine in ostale tehnične podrobnosti po dogovoru oziroma po željah kupca.